KEYDIY KD-X2

Contents

KEYDIY KD-X2 Remote Maker User Manual

Model: KD-X2

1. Introduction

The KEYDIY KD-X2 is a versatile auto key programmer and remote maker designed to replace the functions of previous KD900/URG200 devices while adding enhanced capabilities. It is an essential tool for professionals in the automotive locksmith industry, offering a wide range of functions for remote control generation, chip cloning, and identification.

The KD-X2 features a 0.91-inch OLED display, Bluetooth BLE4.0 for mobile app connectivity, and USB-B for PC software and OTG connection with Android devices. It includes three functional shortcut buttons for quick access to chip identification, remote identification, and frequency detection.

This manual provides detailed instructions on how to set up, operate, and maintain your KD-X2 device.

2. Key Features and Functions

  • Power Supply: 2600mAh lithium battery, charged via USB 5V/1A.
  • Display: 0.91-inch OLED screen.
  • Connectivity: Bluetooth BLE4.0 for mobile KD app, USB-B for PC software and Android phone/tablet OTG connection.
  • Interface: PS-2 for connecting remotes for generation.
  • Shortcut Buttons: Three dedicated buttons for chip identification, remote identification, and frequency detection.
  • Basic Functions:
    1. Wired Generation
    2. Wireless Generation
    3. Mobile Phone Simulation
    4. Garage Door Generation
    5. Proximity Key Unlock
    6. Frequency Detection
    7. Infrared Detection
    8. Access Card Copy
    9. Fixed Code Remote Copy
    10. Online HCS Remote Copy
    11. Online Chip Copy (supports 96-bit 48 chip, 46 chip, 4D chip, Toyota G chip, etc.)
    12. Chip Generation
    13. Chip Editing
    14. Chip Simulation
    15. Ignition Coil Detection
    16. Remote Data Backup
  • Additional Functions: Will be available in succession through updates.
  • Free Activation: Includes free activation of 96 Bits 48 Transponder Copy (no token required).

3. Setup and Initial Use

3.1 Powering On/Off

  • Power On: Press and hold the red side button of the KD-X2 for 2 seconds. The screen will display "KEYDIY" and the indicator light will blink.
  • Power Off: Press and hold the red side button until the screen is blank. The device will automatically shut down after 5 minutes of inactivity.

3.2 Mobile KD App Download and Bluetooth Connection

  1. Download the App: Scan the QR code on the back of the KD-X2 device or search for "Mobile KD" in your device's app store (available for both Android and iOS).
  2. Enable Bluetooth: Ensure Bluetooth is enabled on your mobile phone.
  3. Open Mobile KD App: Keep the KD-X2 powered on.
  4. Search for Device: In the app's first page, click "Bluetooth Settings" and then "Click to Search". The app will refresh and display nearby KD devices.
Screenshot of KD-X2 app showing ID48 Online Clone with user authentication tip

Figure 1: KD-X2 App - ID48 Online Clone with User Authentication Tip

Screenshot of KD-X2 app showing ID48 Online Clone with data upload option

Figure 2: KD-X2 App - ID48 Online Clone Data Upload

3.3 Pairing the Device

  1. Once your KD-X2 is found in the list of unpaired devices, click the "Pair" button next to it.
  2. A prompt for a password will appear. Enter the default password "KEYDIY".
  3. Click "OK" to complete the pairing process.

3.4 Firmware and Data Updates

After successful pairing, it is crucial to update your device's firmware and remote data.

  1. Firmware Update: In the Mobile KD App, navigate to the "Update" section. Click "Upgrade KD device" and follow the on-screen instructions to update the firmware.
  2. Remote Data Update: In the same "Update" section, click "Online Updates" to update the remote data.

Note: Do not close the app interface during the update process. If the update fails, you can try updating via KD PC software.

3.5 Personal Information Verification (for KD-coins)

To earn KD-coins for certain functions like ID48 cloning, you need to verify your personal information within the app:

  1. Tap "Me" in the app.
  2. Tap "Certification".
  3. Verify both sides of your ID card by uploading images.
  4. Upon successful user authorization, you will receive 50 KD-coins.
  5. Tap "My KD-coins" to check your balance.
Screenshots showing steps for personal info verification in the KD app

Figure 3: KD-X2 App - Personal Information Verification Process

4. Operating Instructions

4.1 Chip Identification

To identify the type of a transponder chip:

  1. Place the chip into the designated chip slot on the KD-X2 device.
  2. Press the "Chip Identification" shortcut button.
  3. The device's OLED screen will display the chip type (e.g., 10 T5, 46, 48, 4A, 4C).
KD-X2 identifying a chip, displaying '10 T5'

Figure 4: Chip Identification - 10 T5

KD-X2 identifying a chip, displaying '46 Unlock Clone'

Figure 5: Chip Identification - 46 Unlock Clone

KD-X2 identifying a chip, displaying '48 Unlock Clone'

Figure 6: Chip Identification - 48 Unlock Clone

KD-X2 identifying a chip, displaying '4A'

Figure 7: Chip Identification - 4A

KD-X2 identifying a chip, displaying '4C Clone'

Figure 8: Chip Identification - 4C Clone

4.2 ID48 96-bit Chip Cloning

The KD-X2 offers free activation for 96-bit 48 transponder copy. Cloning ID48 chips requires KD-coins or tokens.

  • Earning KD-coins:
    1. You earn 20 free KD-coins for every remote you generate using the KD-X2. This means for every 8 remotes generated, you get 1 free ID48 clone.
    2. Upon successful personal information verification (as described in Section 3.5), you will receive 50 KD-coins.
    3. When cloning to a 46-chip remote, you receive an additional 10 KD-coins.
  • Cost: Each ID48 clone typically costs 150 KD-coins or $10 USD per token.
  • Note: Tokens from other KD units (KD900, KS900+, KD200) cannot be transferred to the KD-X2.

4.3 Product Demonstration Video

Video 1: Demonstration of KEYDIY KD-X2 features and operation.

5. Maintenance

  • Keep the device clean and free from dust and moisture.
  • Store the device in a cool, dry place when not in use.
  • Avoid dropping or subjecting the device to strong impacts.
  • Use only the provided charging cable and power adapter (USB 5V/1A) to charge the device.
  • Regularly check for and install firmware and remote data updates to ensure optimal performance and access to the latest features.

6. Troubleshooting and FAQ

6.1 Common Issues and Solutions

  • Update Failure: If a firmware or remote data update fails via the mobile app, try performing the update using the KD PC software connected via USB-B.
  • Device Not Found During Bluetooth Search: Ensure the KD-X2 is powered on and in an awakened state. Keep the device close to your mobile phone.
  • KD-coins Not Accumulating: If multiple operators are using the device, ensure they are logged into the same account on the mobile app. Points will only accumulate to the account logged in and using the KD-X2. Remotes generated by older KD devices (KD900, KS900+, KD200) do not earn KD-coins for the KD-X2.

6.2 Frequently Asked Questions

Q: Where can I purchase KD-coins?
A: While specific details on purchasing KD-coins are not yet available, they will be made purchasable. Currently, you can earn free KD-coins by generating remotes and cloning 46-chips, as well as through initial app verification.

7. Specifications

FeatureSpecification
ModelKD-X2
BrandKEYDIY (ecusells)
Power Supply2600mAh Lithium Battery
Charge MethodUSB 5V/1A
Display Screen0.91 inch OLED
Wireless FunctionYes (Bluetooth BLE4.0)
R/C FunctionWithout
CustomizationNo
Manufacturer Part NumberKD-X2 data collector
Interchange Part Numberkd-x2
Package Length20 cm
Package Width20 cm
Package Height15 cm
Package Weight0.2 kg
OriginMainland China

8. User Tips

  • Always ensure your KD-X2 device is updated to the latest firmware and remote data before attempting to clone remotes or immobilizers for optimal performance and compatibility.
  • For detailed visual instructions and demonstrations, refer to the official product video and the PDF user manual.

9. Package Contents

The standard package for the KEYDIY KD-X2 Remote Maker includes:

  • 1pc x KEYDIY KD-X2 Main Unit
  • 1pc x PC Data Cable
  • 1pc x 3 Commonly Remotes (Note: The specific model of remotes may vary.)
  • 1pc x Remote Data Cable
  • 1pc x Spare Remote Data Cable

Note: Package details may vary depending on the specific product option chosen at the time of purchase.

KEYDIY KD-X2 device and accessories including cables, remotes, and probes

Figure 9: KEYDIY KD-X2 Package Contents

10. Support and Additional Resources

For further assistance, technical support, or to access the full user manual in PDF format, please refer to the official KEYDIY website or contact your vendor. The PDF user manual can be found at: KEYDIY KD-X2 User Manual (PDF).

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.