Vehicleader 12V / 24V Diesels Air Heater LCD Monitor Switch / Remote Control / Control Board Motherboard For Car Parking Heater Controller

Contents

Vehicleader 12V/24V Diesel Air Heater Controller Kit User Manual

For LCD Monitor Switch, Remote Control, and Control Board Motherboard

1. Introduction

This manual provides detailed instructions for the installation, operation, maintenance, and troubleshooting of your Vehicleader 12V/24V Diesel Air Heater Controller Kit. This kit includes an LCD monitor switch, a remote control, and a control board motherboard, designed to enhance the functionality of your car parking heater.

Compatibility Note: This kit is generally suitable for most Eberspacher heaters but is NOT suitable for Webasto heaters.

2. Product Components

The Vehicleader Diesel Air Heater Controller Kit typically includes the following components:

  • LCD Monitor Switch
  • Remote Control
  • Control Board Motherboard
  • Associated Wiring Harnesses (e.g., Wire Harness A, B, C)
Overview of Vehicleader Diesel Air Heater Controller Kit components: LCD monitor, remote control, control board, and connectors.
Figure 1: All components of the controller kit.

2.1 Component Dimensions

Dimensions of the LCD monitor and remote control. LCD monitor: 95mm length, 60mm width, 20mm thickness, 300mm cable length. Remote control: 60mm length, 35mm width, 20mm thickness.
Figure 2: Dimensions of the LCD Monitor and Remote Control.
Dimensions of the control board motherboard: 104mm length, 58mm width.
Figure 3: Dimensions of the Control Board Motherboard.

3. Setup and Installation

Proper installation is crucial for the optimal performance of your heater controller kit. Please follow these guidelines carefully.

3.1 Compatibility Check

Before installation, ensure that your existing heater host and its accessories are compatible with the provided control board motherboard. For guaranteed compatibility and optimal operation, it is highly recommended to purchase matching monitors, motherboards, and wiring harness products from Vehicleader.

3.2 LCD Monitor and Remote Control Pairing

The LCD monitor and remote control must be correctly matched for successful pairing and operation. There are 'Old style' and 'New style' versions, distinguishable by their button patterns:

  • The LCD Monitor with a sun pattern on the upper left button should be used with a Remote Controller that has solid buttons.
  • The LCD Monitor with a wrench pattern on the upper left button should be used with a Remote Controller that has hollow buttons.

Important: Verify the button differences between your LCD Monitor and Remote Controller before attempting to pair, as incorrect matching will prevent successful pairing. Vehicleader remote controls are designed to work specifically with Vehicleader blue monitors and cannot be paired with other brands or incompatible monitors.

Comparison image showing 'Old style' LCD monitor with sun icon and solid button remote, and 'New style' LCD monitor with wrench icon and hollow button remote.
Figure 4: Old Style vs. New Style LCD Monitors and Remote Controls.

3.3 Wiring Harness Connection

Connect the appropriate wiring harnesses to the control board motherboard and then to your diesel air heater system. Ensure all connections are secure and correctly seated to prevent malfunctions.

Close-up images of 3-pin and 2-pin electrical connectors, showing their design and how they connect.
Figure 5: Example of Wiring Harness Connectors.

3.4 Remote Control Battery Installation

The remote control requires 2 x AAA batteries for operation. These batteries are not included with the kit. Open the battery compartment on the back of the remote control, insert the batteries with the correct polarity, and close the compartment securely.

4. Operating Instructions

The controller kit provides convenient control over your diesel air heater.

4.1 Powering On/Off

Use the designated power button on either the LCD monitor switch or the remote control to turn the heater system on or off.

4.2 LCD Display and Functions

Both the remote control and the main monitor switch feature clear LCD screens. These displays show various operational parameters such as temperature settings, fan speed, battery status, current time, and other system indicators. The system includes timing functions for scheduled operation and plateau adaptive functions for consistent performance at different altitudes.

LCD monitor display showing icons for fan speed, temperature, battery level, time, and other heater status indicators.
Figure 6: LCD Monitor Display Interface.

5. Maintenance and Care

5.1 Initial Setup

Before first use, ensure you remove any protective skin or film from the LCD screen to ensure clear visibility and proper touch response (if applicable).

Close-up image of an LCD monitor with a protective film being peeled off, indicated by a red circle.
Figure 7: Removing protective film from LCD screen.

5.2 General Cleaning

Keep the LCD monitor and remote control clean by wiping them with a soft, dry cloth. Avoid using abrasive cleaners or solvents that could damage the plastic or screen.

6. Troubleshooting

If you encounter issues with your controller kit, refer to the following common problems and solutions:

  • Pairing Failure: If the remote control and LCD monitor fail to pair, re-check the compatibility between the 'Old style' and 'New style' units as described in Section 3.2. Ensure the button patterns match correctly.
  • No Power/No Display: Verify that the remote control has fresh AAA batteries installed correctly. For the main monitor and control board, ensure all wiring harness connections are secure and that the heater system is receiving power.
  • Inconsistent Operation: Ensure all components are securely connected and that the control board is compatible with your heater host.

7. Specifications

Feature Specification
Voltage 12V / 24V
Material Plastic
Remote Control Power Supply 2 x AAA Battery (Not Included)
Control Board Compatibility 12V / 24V 3KW / 5KW Diesel Air Heater
Special Features LCD Remote Control, Timing Function, Plateau Adaptive Function
LCD Monitor Dimensions (L x W x T) 95mm x 60mm x 20mm (approx.)
Remote Control Dimensions (L x W x T) 60mm x 35mm x 20mm (approx.)
Control Board Dimensions (L x W) 104mm x 58mm (approx.)

8. User Tips

  • Easy Installation: Many users find the installation process straightforward. Take your time to correctly identify and connect all wiring harnesses.
  • Energy Efficiency: The system is designed for energy-efficient operation, helping to optimize your heater's power consumption.
  • Clear Display: Utilize the clear LCD screens on both the monitor and remote for easy monitoring of heater status and precise control over settings.
  • Pre-Use Check: Always remember to remove the protective film from the LCD screen before initial use for the best viewing experience.

9. Warranty and Support

For any questions, technical support, or warranty inquiries regarding your Vehicleader Diesel Air Heater Controller Kit, please contact the seller or manufacturer's customer service directly. They will be able to provide assistance specific to your purchase.

For additional detailed instructions and diagrams, you may refer to the official user manual PDF: Vehicleader User Manual (PDF)

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.