1. Introduction
This manual provides essential information for the safe and efficient use of your GUWIEYG Type1 to GBT EV Charger Adapter. Please read this manual thoroughly before using the adapter and retain it for future reference.
The GUWIEYG Type1 to GBT EV Charger Adapter is designed to enable electric vehicles equipped with a GBT charging port to be charged using a Type1 (SAE J1772) AC charging station, portable charger, or wall box.
2. Safety Information
2.1 General Warnings
- Vehicle Model Compatibility: Pay close attention to your vehicle model and ensure compatibility with this adapter. This adapter is specifically for converting a Type1 (J1772) charger to charge a GBT EV.
- Special Charging Equipment: Always use special charging equipment as specified by your vehicle manufacturer and charging station provider.
- Damage Inspection: Do not use the adapter if any damage is visible on the adapter, charging cable, or vehicle charging port. Contact support immediately if damage occurs.
- Environmental Conditions: Avoid exposing the adapter to extreme temperatures or harsh weather conditions beyond its specified operating range.
2.2 Product Features for Safety
- Fireproof Materials: Constructed with UL94V-0 fireproof materials for enhanced safety.
- Waterproof Rating: Features an IP54 waterproof rating, providing protection against dust and splashing water.


3. Product Overview
The GUWIEYG Type1 to GBT EV Charger Adapter is a compact and portable solution for EV charging compatibility. It allows seamless connection between Type1 (SAE J1772) AC charging infrastructure and GBT-equipped electric vehicles.
3.1 Components
- Type1 (SAE J1772) input connector
- GBT output connector
- Durable ABS+PC housing


3.2 Compatibility
This adapter is compatible with:
- J1772 Portable Chargers
- J1772 Wall Boxes
- J1772 Charging Stations
Note: This adapter is NOT compatible with CCS1 Superchargers.

4. Specifications
| Attribute | Specification |
|---|---|
| Adapter Type | Type1 (SAE J1772) to GBT |
| Current | 32A Max Single Phase |
| Voltage | 110/220V ±20% AC |
| Protection Level (IP Rating) | IP54 |
| Shell Material | ABS+PC |
| Pin Material | Copper-Sliver |
| Operating Temperature | -30°C to +50°C |
| Charger Outlet Standard | TYPE1 |
| Vehicle Inlet Standard | GB/T |
| Weight | 0.5 KG |
| Dimensions (L x W x H) | 21 cm x 8 cm x 8 cm (approx. 6.5 inches length) |
| Warranty | 2 Years |


5. Setup and Operation
5.1 Initial Setup
- Unpack the GUWIEYG Type1 to GBT adapter from its packaging.
- Inspect the adapter for any signs of damage. If damaged, do not use and contact support.
5.2 Charging Procedure
Follow these steps to charge your GBT EV using a Type1 (J1772) charger:
- Connect J1772 Charger to Adapter: Take your Type1 (SAE J1772) charging cable and securely connect its plug into the Type1 input port of the GUWIEYG adapter.
- Plug Adapter into GBT EV: Insert the GBT output end of the adapter into your electric vehicle's GBT charging port. Ensure a firm connection.
- Initiate Charging: Once both connections are secure, the charging process should begin automatically or can be initiated via your charging station or vehicle interface.
- Release Plug and Adapter: After charging is complete, safely disconnect the adapter from your EV and then disconnect the J1772 charger from the adapter.

5.3 Video Demonstration
For a visual guide on unboxing and using the adapter, please watch the official product video:
6. Maintenance
To ensure the longevity and optimal performance of your adapter:
- Keep the adapter clean and free from dust and debris.
- Store the adapter in a dry place when not in use.
- Avoid dropping or subjecting the adapter to strong impacts.
- Regularly check the connectors for any signs of wear or corrosion.
7. Troubleshooting
7.1 Vehicle Fails to Initiate Charging
If your electric vehicle does not begin charging after connecting the adapter, consider the following steps:
- Unplug and Reconnect: Safely disconnect the adapter from both the charger and the vehicle, then re-establish the connection, ensuring all plugs are fully seated.
- Verify Charging Status: Check the charging status indicators on both the charging station and your electric vehicle's display for any error messages or status updates.
- Contact Support: If issues persist after attempting the above steps, please contact GUWIEYG support for further assistance.
7.2 Charging Time Variations
The actual charging time can vary due to several factors:
- The specific charging station's power output.
- Your electric vehicle's battery specifications and current state of charge.
- Ambient environmental conditions (e.g., temperature).
- The battery's internal temperature.
8. User Tips
- This adapter is designed to allow a Type1 (SAE J1772) charger to charge a GBT-compatible electric vehicle. It is not suitable for connecting a GBT charger to a Type1 (SAE J1772) electric vehicle.
- Always ensure the adapter is fully inserted and locked into both the charger and the vehicle port before initiating charging to prevent loose connections and potential issues.
9. Warranty and Support
9.1 Warranty
This product comes with a 2-year warranty from the date of purchase. Please retain your proof of purchase for warranty claims.
9.2 Contact Support
For maintenance, servicing, replacements, or any other assistance, please contact our support team through the following channels:
- Website: guwieyg.com
- Email: support@guwieyg.com
Manufacturer: JI NAN IKSONG E-COMMERCE CO.,LTD
Address: 1034, Building A, Xi Bu Chuang Xin Chan Ye Yuan, Chang Qing, Ji Nan, Shan Dong, PRC, 25000.