1. Introduction
This manual provides essential information and guidelines for the replacement of the mainboard and LCD screen display for Godox V1 series camera flashes. This product is a 100% new original replacement part designed to restore the full functionality of your Godox V1 flash unit. Please read all instructions carefully before proceeding with installation.
2. Safety Information
- Professional Installation Recommended: Replacing internal electronic components requires technical expertise. If you are not comfortable with electronic repairs, seek assistance from a qualified technician.
- Power Off: Always ensure the flash unit is completely powered off and disconnected from any power source (including batteries) before beginning any repair or replacement work.
- Static Discharge: Electronic components are sensitive to static electricity. Use an anti-static wrist strap or take other precautions to prevent electrostatic discharge (ESD) damage.
- Handle with Care: The mainboard and LCD screen are delicate. Avoid touching exposed circuits and connectors directly.
- Small Parts: Keep small screws and components organized to prevent loss.
3. Product Overview
This replacement kit includes a new mainboard and an integrated LCD screen display for your Godox V1 flash. It is available in variants compatible with different camera mounts:
- V1-S: For Sony Mount
- V1-C: For Canon Mount
- V1-N: For Nikon Mount
- V1-F: For Fujifilm Mount
Ensure you have the correct variant for your specific Godox V1 flash model.

Figure 3.1: Godox V1 Mainboard and LCD screen display in packaging.

Figure 3.2: Front view of the Godox V1 Mainboard with LCD.

Figure 3.3: Rear view of the Godox V1 Mainboard.
Specific variants:

Figure 3.4: V1-S Mainboard for Sony Mount.

Figure 3.5: V1-C Mainboard for Canon Mount.

Figure 3.6: V1-N Mainboard for Nikon Mount.

Figure 3.7: V1-F Mainboard for Fujifilm Mount.
4. Setup and Installation
This section outlines the general steps for replacing the mainboard and LCD screen. Specific disassembly and reassembly procedures may vary slightly depending on the exact Godox V1 model. Refer to a service manual or detailed repair guide for your specific flash model if available.
4.1. Tools Required (General)
- Small Phillips head screwdrivers
- Plastic prying tools (spudgers)
- Tweezers
- Anti-static mat and wrist strap
4.2. Disassembly
- Power Off and Remove Batteries: Ensure the flash unit is completely off and remove all batteries.
- Remove External Components: Carefully remove any external covers, battery doors, or other components that obstruct access to the internal electronics.
- Locate and Disconnect Cables: Identify and gently disconnect all ribbon cables, wire connectors, and flex cables attached to the old mainboard and LCD. Pay close attention to their orientation and locking mechanisms.
- Remove Old Mainboard/LCD: Unscrew any retaining screws holding the old mainboard and LCD assembly in place. Carefully lift and remove the old components.
4.3. Installation of New Mainboard and LCD
- Prepare New Component: Carefully remove the new mainboard and LCD assembly from its anti-static packaging. Inspect it for any visible damage.
- Position New Mainboard: Align the new mainboard and LCD assembly with the mounting points inside the flash unit.
- Secure Mainboard: Gently press the mainboard into place and secure it with the retaining screws. Do not overtighten.
- Reconnect Cables: Carefully reconnect all ribbon cables, wire connectors, and flex cables to their corresponding ports on the new mainboard. Ensure all connections are secure and correctly oriented.
4.4. Reassembly
- Replace Internal Components: Reinstall any internal components that were removed during disassembly.
- Reattach External Covers: Carefully reattach all external covers and battery doors. Ensure all screws are tightened appropriately.
- Insert Batteries: Once fully reassembled, insert fresh batteries into the flash unit.
5. Operating Instructions
After successful installation of the new mainboard and LCD screen, your Godox V1 flash unit should function as normal. Refer to your original Godox V1 flash user manual for detailed operating instructions on how to use the flash unit's features, settings, and modes. The replacement components are designed to restore the original functionality without altering the flash's operation.
6. Maintenance
As an internal electronic component, the mainboard and LCD screen require minimal maintenance. To ensure longevity:
- Keep Dry: Avoid exposing the flash unit to moisture or liquids.
- Clean Gently: If the LCD screen requires cleaning, use a soft, lint-free cloth. Do not use harsh chemicals or abrasive materials.
- Avoid Impact: Protect the flash unit from drops or impacts that could damage internal components.
7. Troubleshooting
If you encounter issues after replacing the mainboard and LCD, consider the following:
- Flash Unit Does Not Power On:
- Check battery installation and charge level.
- Verify all internal cable connections are secure.
- Ensure the mainboard is correctly seated and all screws are tightened.
- LCD Display Not Working or Showing Errors:
- Check the ribbon cable connection between the LCD and the mainboard.
- Ensure the LCD is properly seated in its frame.
- Buttons or Dials Not Responding:
- Verify that all flex cables for buttons and dials are correctly connected to the mainboard.
- Ensure no cables are pinched during reassembly.
- Flash Not Firing or Incorrect Output:
- This could indicate an issue beyond the mainboard/LCD. Recheck all connections.
If problems persist, it is recommended to consult a professional repair service or contact the seller for further assistance.
8. Specifications
| Feature | Detail |
|---|---|
| Product Type | Control Board + LCD Screen Display |
| Applicable Model | For Godox V1 (V1S, V1C, V1N, V1F) |
| Product Condition | 100% NEW Original |
| Package | Yes |
| Compatible Brand | For Godox |
| Origin | Mainland China |
9. Warranty and Support
For any questions regarding the product, installation, or potential defects, please contact the seller directly. Keep your purchase records for warranty claims if applicable. The seller, MH Official Store, provides support for this product.