Cayin MT-45MK3

Contents

Cayin MT-45MK3 Bluetooth Vacuum Tube Integrated Amplifier

Model: MT-45MK3

Brand: Cayin

Introduction

The Cayin MT-45MK3 is a high-fidelity Bluetooth vacuum tube integrated amplifier designed to deliver a sweet, detailed, and dynamic audio experience. This amplifier features a robust design with carefully selected vacuum tubes, handmade point-to-point wiring, and high-quality transformers. It offers both traditional line inputs and modern Bluetooth connectivity, making it a versatile centerpiece for your audio system.

The MT-45MK3 allows users to adjust the bias of the power valves and monitor power output using the precision meters on the front panel. It also includes a removable metallic tube protection cage for safety and aesthetics.

Safety Instructions

  • Read all instructions: Before operating the amplifier, carefully read and understand all safety and operating instructions.
  • Retain instructions: Keep this manual for future reference.
  • Heed warnings: Always follow all warnings on the product and in the operating instructions.
  • Power source: Connect the amplifier only to a power supply of the type described in this manual or marked on the unit. Ensure the voltage matches your region (120V or 230V).
  • Ventilation: Do not block any ventilation openings. Install in accordance with the manufacturer's instructions. Ensure adequate space around the unit for heat dissipation.
  • Heat: Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
  • Water and moisture: Do not use this apparatus near water or in damp environments.
  • Cleaning: Clean only with a dry cloth.
  • Power cord protection: Protect the power cord from being walked on or pinched, particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.
  • Tube handling: Vacuum tubes can become very hot during operation. Avoid touching them. Allow sufficient time for tubes to cool down before handling or replacing.
  • Servicing: Do not attempt to service this product yourself. Refer all servicing to qualified service personnel.

Package Contents

Please check the package for the following items:

  • Cayin MT-45MK3 Integrated Amplifier
  • Power Cord
  • Bluetooth Antenna (for models with Bluetooth)
  • Removable Metallic Tube Protection Cage
  • User Manual (this document)

Product Overview

Front Panel

Front view of the Cayin MT-45MK3 amplifier

Front view of the Cayin MT-45MK3 amplifier, showcasing the vacuum tubes, volume knob, input selector, power level meters, and headphone jack.

  • Volume Knob: Adjusts the overall output volume.
  • Power Level Meters: Dual function meters display power output and can be used for bias adjustment.
  • Input Selector: Rotary knob to select between LINE1, LINE2, LINE3, and Bluetooth inputs.
  • Headphone Output (PHONES): 6.35mm jack for connecting headphones (16Ω~300Ω).

Top Panel (Tubes and Switches)

Close-up of the tubes and bias/mode switches

Close-up of the vacuum tubes (ECF82, 12AU7, KT88) and switches for "TR/UL" (Triode/Ultralinear mode) and "BIAS" adjustment, located on the top panel.

  • Vacuum Tubes: ECF82 (V1, V2), ECC82 (V3, V4), KT88 (Power Output Tubes).
  • TR/UL Switch: Toggles between Triode and Ultralinear operating modes.
  • BIAS Switch: Used in conjunction with the front panel meters for bias adjustment.

Rear Panel

Rear panel of the amplifier with inputs and outputs

Rear panel view of the amplifier, showing three pairs of RCA line inputs (LINE1, LINE2, LINE3), a Bluetooth antenna connector, and speaker output terminals for 4Ω and 8Ω.

  • Line Inputs (LINE1, LINE2, LINE3): RCA jacks for connecting external audio sources (e.g., CD player, DAC).
  • Bluetooth Antenna Connector: For attaching the included Bluetooth antenna.
  • Speaker Outputs (4Ω, 8Ω): Binding posts for connecting speakers. Ensure correct impedance matching.
  • Power Inlet: For connecting the power cord.

Setup

1. Unpacking and Placement

  • Carefully remove the amplifier from its packaging.
  • Place the amplifier on a stable, level surface with adequate ventilation. Avoid placing it in enclosed cabinets or near heat sources.
  • Install the removable metallic tube protection cage over the vacuum tubes.

2. Connecting Speakers

  • Identify the impedance of your speakers (typically 4Ω or 8Ω).
  • Connect your speakers to the corresponding 4Ω or 8Ω speaker output terminals on the rear panel. Ensure correct polarity (+ to + and - to -).

3. Connecting Audio Sources

  • For wired sources (e.g., CD player, turntable with phono preamp), connect them to the LINE1, LINE2, or LINE3 RCA inputs on the rear panel using appropriate RCA cables.
  • For Bluetooth connectivity, screw the provided Bluetooth antenna onto the designated connector on the rear panel.

4. Power Connection

  • Ensure the amplifier's power switch is in the OFF position.
  • Connect the power cord to the power inlet on the rear panel of the amplifier and then to a suitable wall outlet. Verify that the voltage setting of the amplifier matches your local power supply (120V or 230V).

Operating Instructions

1. Powering On/Off

  • To power on, flip the power switch (usually located on the rear or front panel) to the ON position. The tubes will begin to warm up.
  • Allow a few minutes for the vacuum tubes to reach optimal operating temperature before playing music.
  • To power off, flip the power switch to the OFF position.

2. Input Selection

  • Use the Input Selector knob on the front panel to choose your desired audio source (LINE1, LINE2, LINE3, or Bluetooth).

3. Volume Control

  • Rotate the Volume knob on the front panel to adjust the listening level. Start with a low volume and gradually increase it to a comfortable level.

4. Bluetooth Pairing

  • Select the 'Bluetooth' input using the Input Selector knob.
  • On your mobile device or Bluetooth audio source, enable Bluetooth and search for available devices.
  • Select 'Cayin MT-45MK3' (or similar name) from the list of devices to pair.
  • Once paired, you can stream audio wirelessly to the amplifier.

5. Triode / Ultralinear Mode Selection

Image explaining Triode/Ultralinear mode selection

Image explaining the Triode/Ultralinear mode selection and highlighting the Cayin House Design Toroidal Power Transformer and EI Output Transformers.

  • The MT-45MK3 offers two operating modes: Triode and Ultralinear.
  • Use the 'TR/UL' switch on the top panel to select your preferred mode.
  • Triode Mode: Provides a softer, smoother sound, ideal for vocals and instruments (2 x 20W output).
  • Ultralinear Mode: Offers a more open sound with a wider sound field, suitable for dynamic music (2 x 40W output).

Bias Adjustment

Proper bias adjustment is crucial for optimal performance and longevity of your vacuum tubes. The MT-45MK3 features built-in meters for easy adjustment.

Close-up of the dual function meters on the front panel

Close-up of the dual function meters on the front panel, labeled "POWER LEVEL" and showing bias and output percentages.

  1. Ensure the amplifier has been powered on for at least 15-20 minutes to allow the tubes to warm up and stabilize.
  2. Locate the 'BIAS' switch on the top panel (near the tubes).
  3. Flip the 'BIAS' switch to the 'BIAS' position. The front panel meters will now display the bias current for the power tubes.
  4. Using a small screwdriver, carefully adjust the bias potentiometers (usually small screws located near each power tube on the top panel) until the meter needle points to the recommended bias level (typically marked on the meter or specified in the manual, often around 100% or 0dB for bias).
  5. Adjust each power tube's bias individually.
  6. Once all tubes are adjusted, flip the 'BIAS' switch back to the 'POW' (Power Level) position to monitor output.

Caution: Incorrect bias adjustment can damage the tubes or amplifier. If unsure, consult a qualified technician.

Maintenance

Cleaning

  • Always disconnect the power cord before cleaning.
  • Use a soft, dry cloth to wipe the exterior of the amplifier.
  • Do not use liquid cleaners, aerosols, or harsh chemicals, as they may damage the finish or internal components.

Tube Replacement

  • Vacuum tubes have a finite lifespan and will eventually need replacement. Signs of worn tubes include reduced sound quality, noise, or failure to light up.
  • Ensure the amplifier is powered off and completely cooled down before attempting to replace tubes. Tubes can be extremely hot.
  • Carefully remove the tube protection cage.
  • Gently pull the old tube straight up from its socket. Avoid wiggling, which can damage the pins or socket.
  • Insert the new tube, aligning the pins with the socket holes. Apply gentle, even pressure until it is fully seated.
  • After replacing power tubes (KT88), it is essential to perform a bias adjustment as described in the 'Bias Adjustment' section.
  • It is recommended to use matched sets of power tubes for optimal performance. Contact your dealer or Cayin Official Store for genuine replacement tubes.

Troubleshooting

  • No power: Check if the power cord is securely connected to both the amplifier and the wall outlet. Ensure the power switch is ON. Verify the wall outlet is functioning.
  • No sound:
    • Check speaker connections and ensure correct polarity.
    • Verify the input source is correctly selected and connected.
    • Ensure the volume is turned up.
    • Check if the tubes are glowing. If not, they may be faulty or not seated correctly.
  • Distorted sound:
    • Check speaker impedance matching.
    • Ensure input source levels are not too high, causing clipping.
    • Perform bias adjustment for power tubes.
    • Tubes may be worn out and require replacement.
  • Hum or noise:
    • Ensure all cables are properly shielded and connected.
    • Try moving the amplifier away from other electronic devices that might cause interference.
    • Check for ground loops.
  • Bluetooth connection issues:
    • Ensure the Bluetooth antenna is securely attached.
    • Make sure the amplifier is in Bluetooth input mode.
    • Try unpairing and re-pairing the device.
    • Ensure your source device is within the effective range (≤10M).

If problems persist, contact qualified service personnel.

Specifications

Detailed specification table for the amplifier and its Bluetooth features

Detailed specification table for the amplifier and its Bluetooth features.

CategorySpecification
Amplifier
Power Output RMS (KT88)2 x 40W (Ultralinear mode), 2 x 20W (Triode mode)
Frequency Response8 Hz - 60 kHz (-3dB)
Input Sensitivity300mV
Input Impedance100Kohms
Tubes UsedECF82×2, ECC82×2, KT88×4
Output Impedance4 ohm, 8 ohm
Headphone Output16Ω~300Ω
InputsLINE1, LINE2, LINE3, Bluetooth
THD+N0.2% (1W/1kHz)
S/N Ratio90dB (A-Weighted)
Power Consumption280W
Dimension (W x H x D)300mm × 385mm × 190mm
Net Weight16.5kg
Voltage120 V or 230 V (model dependent)
Bluetooth
Bluetooth VersionV5.0
Bluetooth ChipQCC5125
DAC ChipES9018K2M
Audio Format SupportUAT, LDAC, apt-X, apt-X HD, apt-X Low latency, SBC, AAC
Effective Range≤10M

User Tips

  • No Remote Control: Please note that the Cayin MT-45MK3 amplifier does not include a remote control. All operations are performed directly on the unit.
  • Voltage Options: The amplifier is available in both 120V and 230V versions. Ensure you have the correct voltage model for your region.
  • Tube Warm-up: Allow the amplifier to warm up for at least 15-20 minutes after powering on for optimal sound quality.
  • Bias Adjustment Importance: Regularly check and adjust the bias of the power tubes, especially after replacing them, to maintain sound quality and extend tube life.
  • Tube Protection Cage: Always use the included metallic tube protection cage to prevent accidental contact with hot tubes and to protect them from damage.
  • Color Availability: The standard color for this model is silver. Other color options may not be available.

Warranty and Support

Cayin products are manufactured to high standards and undergo rigorous quality control. For warranty information, please refer to the documentation provided with your purchase or contact the Cayin Official Store or your authorized dealer. Keep your proof of purchase for any warranty claims.

For technical support, replacement parts (such as vacuum tubes), or service inquiries, please contact the Cayin Official Store or your authorized dealer. They can provide guidance and genuine components to ensure the continued performance of your amplifier.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.