1. Introduction
Thank you for choosing the ISUDAR 13.1 Inch Android Car Multimedia Radio Player. This manual provides detailed instructions for installation, operation, and troubleshooting to ensure a safe and enjoyable experience with your new car stereo. Please read this manual thoroughly before installation and use.
1.1 Precautions
- For any issues during installation or usage, please contact our after-sales support.
- Please install it under professional guidance, as it involves electronic equipment and automotive accessories that may pose risks such as electric shock, injury, or other hazards if handled by untrained individuals.
- Ensure the power is disconnected when installation.
- It is highly recommended to seek professional help for the installation or servicing of this product, as it involves electronic equipment and automotive accessories that may pose risks such as electric shock, injury, or other hazards if handled by untrained individuals.
- This product is designed for vehicles with a 12V DC power system only. Do not install it on vehicles with a different power supply, as it may damage the product or cause a fire due to over-voltage.
- Turn off the car and disconnect the positive battery terminal before installation, insulate all wires properly after installation to prevent short circuits that can lead to product damage or fires.
- Avoid using the car audio system for an extended period after turning off the engine to prevent draining the battery power.
- If the product gets exposed to water damage or foreign matter while driving, park the vehicle in a safe location, turn off the ignition switch (ACC OFF) immediately, and consult your dealer or customer service. Do not use the product in this condition, as it may result in fire, electric shock, or other failures.
- In case of smoke, strange noises, unusual odors, or any other abnormal signs during normal use, immediately turn off the power and consult your dealer or customer service. Do not use the product in this condition, as it may result in fire, electric shock, or other failures.
- Please place the product out of reach of children to avoid unnecessary harm.
- The manufacturer reserves the right to provide the final explanation.
2. Setup and Installation
2.1 Package Contents
Before installation, please verify that all components are present:

Figure 2.1: Package Contents
- Main Unit (13.1 Inch Android Radio)
- Power cable (optional)
- Radio cable
- USB cables (6-pin and 4-pin)
- SIM card slot & RCA cable
- 4G antenna
- Speaker
- Reverse camera video input cable
- GPS module
- Canbus (optional)
2.2 Wiring & Installation
Refer to the following diagrams for proper wiring and installation.

Figure 2.2: Rear View of the Unit with Connectors
2.2.1 Wiring Diagram

Figure 2.3: Main Wiring Diagram
Note: The Camera Input & WiFi & Bluetooth Antenna Port must be installed. Otherwise the WiFi & BT signal reception will be poor. If your car has a JBL or other amplifier system, you may need another power cord adapter or a more complicated wiring method. Please contact our after-sales support.
2.2.2 Power Plug Definition
| Pin | Function | Pin | Function |
|---|---|---|---|
| 1 | GND | 9 | FR- (Front Right Speaker-) |
| 2 | B+ (Battery +12V) | 10 | RL- (Rear Left Speaker-) |
| 3 | ACC | 11 | FR+ (Front Right Speaker+) |
| 4 | ILL (Illumination) | 12 | RL+ (Rear Left Speaker+) |
| 5 | BACK UP (Camera Back up) | 13 | FL- (Front Left Speaker-) |
| 6 | WHEEL1 (Steering Wheel Control 1) | 14 | RR+ (Rear Right Speaker+) |
| 7 | WHEEL 2 (Steering Wheel Control 2) | 15 | FL+ (Front Left Speaker+) |
| 8 | ANT+12V (Antenna Power) | 16 | RR- (Rear Right Speaker-) |
2.2.3 GPS Antenna Installation
The GPS Antenna is recommended to be installed on the dashboard or below the windshield.

Figure 2.4: GPS Antenna Placement
2.2.4 Frame Installation Tip
Transfer the snap clip from the original frame to the new one (Skip if not applicable to your vehicle).

Figure 2.5: Frame Snap Clip Transfer
2.2.5 Adjustable Installation
The radio features an adjustable installation design. There are 3 sets of fixing screws in different positions on the back of the radio. When installing the frame, you can adjust the radio up and down by a maximum of 25mm, to avoid blocking car buttons or other parts.

Figure 2.6: Adjustable Installation Mechanism
2.3 CANBUS Setup
This step is only necessary if your car radio includes a CANBUS Box and requires setup. If not, you can skip this step entirely.
Steps to set up CANBUS:
- Connect the device to Wi-Fi.
- Go to: Settings > Factory (Code: 123456) > Select models.
- Select: CanBox > Cars for > Models for > Config.
For example, if you purchased a car radio for a Jeep Renegade, and the CANBUS box shows the brand SS (Simple Soft), then choose: 03: Simple Soft > 87: JEEP > 11: 16 Renegade > LowConfig.

Figure 2.7: CANBUS Configuration Interface
2.4 Reverse Camera Connection
2.4.1 For Original Camera:
Just connect the yellow Port "A" to the yellow Port "B" as the picture shows. "A": Reverse Camera Output. "B": Reverse Camera Input.
2.4.2 For Aftermarket Reverse Camera (With Canbus):
- Connect the yellow port “B" to the yellow port "C". The Camera red wire ② connect with the power cable wire “BACK" or "Reverse" ①.(Camera Back UP: The 5th Pin on the “Power Connector" is the brown or pink wire.
- The red wire ③ connect with red wire ④. The black wire ⑤ connects with the Car reversing light negative electrode.
2.4.3 For Aftermarket Reverse Camera (Without Canbus):
- Connect the yellow port “B" to the yellow port "C". The Camera red wire ② connect with the power cable wire“BACK"or"Reverse"①.(Camera Back UP: The 5th Pin on the“Power Connector"is the brown or pink wire.)
- The red wire ③ connect with red wire ④ and connect with the Car reversing light positive electrode. The black wire ⑤ connects with the Car reversing light negative electrode.

Figure 2.8: Reverse Camera Wiring Diagram
3. Operating Instructions
3.1 Basic UI and Navigation
The 13.1-inch screen features a user-friendly Android interface with various applications for communication, entertainment, and navigation.

Figure 3.1: Main User Interface
3.2 Bluetooth 5.0 Hands-free
The unit features built-in Bluetooth 5.0 for stable and efficient wireless connections. It supports mobile phone hands-free calling, music streaming, phonebook access, dial key, and calling history. After the first connection, it will automatically connect to your mobile phone next time.

Figure 3.2: Bluetooth Interface
3.3 Wireless Carplay & Android Auto
The unit supports both wireless and wired Carplay & Android Auto. Connect your mobile phone, and the radio screen will switch to the Carplay or Android Auto interface. You can then run mobile apps like navigation and music directly on the radio screen, enhancing safety and convenience.
3.3.1 Wired Connection:
- Turn off the WiFi and Bluetooth of your phone.
- Use a 4-pin USB cable to connect.
- Turn on the Android Auto app on your phone (for Android Auto).
3.3.2 Wireless Connection:
- Go to Play Store and download the Android Auto App on your phone (for Android Auto).
- Turn on WiFi and Bluetooth of your phone.
- Find the Bluetooth of the stereo (Bluetooth name: CarKit_blink, PIN password: 0000) and connect with it.
- Turn on the Android Auto app on your phone after connecting the Bluetooth successfully.
Note: Please make sure that your phone supports Google services and wireless Android Auto. Apple CarPlay & Android Auto does not support playing video apps like YouTube due to safety considerations while driving. After accessing Carplay & Android Auto, if you want to exit and play music using Bluetooth, please turn off WiFi instead of disconnecting Bluetooth to disconnect.

Figure 3.3: Carplay/Android Auto Interface
3.4 Mirror Link (iPhone AirPlay & Android Link)
The Mirror Link function allows you to display your phone's screen on the car radio.
3.4.1 iPhone AirPlay Connection:
- On the car radio, tap the iPhone icon to activate hotspot connection mode. Then, connect the car radio to your iPhone's personal hotspot.
- On your iPhone, open “Control Center”, tap “Screen Mirroring”, and select "zj-airplay”.
Once connected, wireless screen mirroring will begin successfully.
3.4.2 Android Link Connection:
- Tap the Android icon and scan the QR code to download the app.
- Turn on your phone's BT and connect it to the car radio. After connection, turn off your phone's Wi-Fi and enable the mobile hotspot.
- Connect the car radio to your phone's hotspot.
- On your phone, tap Start Screen Mirroring. The screen will then be mirrored successfully.
Video 3.1: Product Demonstration and Mirror Link
3.5 Network Radio
The unit features a built-in network radio with a collection of high-quality Internet radio stations from over 20 countries. Connect to the Internet to access thousands of program resources. The menu displays popular Top 30 lists, quality radio stations, and recently played stations. You can collect your favorite stations.

Figure 3.4: Network Radio Interface
3.6 Online Weather
The built-in online weather feature provides real-time display of weather in major cities around the world. The weather information will display on the main menu, and the city will change based on your position.

Figure 3.5: Online Weather Display
3.7 Voice Control
The unit includes a built-in professional version voice control with an AI assistant. It supports online voice commands such as "Go to Airport" or "Play Beat It on Spotify", allowing for relaxed and safer driving. The usage period of the professional Voice Control is 1 year, after that it will be reduced to the standard version.

Figure 3.6: Voice Control Interface
3.8 Online Theme
The online theme feature includes hundreds of themes. After activation, you can download and use them at will. The main library is constantly updated, offering various styles and holiday atmospheres like World Cup style, kawaii style, racing style, animation style, and cyberpunk style.

Figure 3.7: Online Theme Selection
3.9 Built-in DSP Sound System
The unit features a built-in DSP (Digital Signal Processor) sound system for enhanced audio control. It offers 36 bands EQ setting to customize your desired music style, sound field adjustment for surround sound immersion, and subwoofer output adjustment to enhance rhythm and reduce driving fatigue.

Figure 3.8: DSP Sound System Interface
3.10 USB DVR Input
The unit supports ADAS USB DVR input. When connected, the screen will display the distance of obstacles and provide alarms. The DVR is not included with the unit.

Figure 3.9: USB DVR Input
3.11 Rear Camera
The unit supports 720P AHD rear cameras with parking lines. This feature aids in safe reversing.

Figure 3.10: Rear Camera Display
3.12 System Settings
3.12.1 Steering Wheel Control
- Click the Steering Wheel icon to open the settings page.
- Click "START", press the corresponding button on the screen, and then press the physical button on the steering wheel. After learning, the button will be highlighted.
- After setting all the necessary buttons, click “END” to complete and save.
Note: For car radios equipped with CANBUS, the steering wheel control buttons are directly decoded by CANBUS and do not require setting in this application. If your car radio is equipped with CANBUS, but the steering wheel control buttons still do not work after setting the CANBUS type, please contact after-sales support for reset instructions.
3.12.2 Logo Setting
You can customize your favorite startup image. Prepare a 32-bit bitmap image with 1024*600 or 1280*720 resolution (or other resolutions depending on your screen) in BMP, PNG, or JPG format. Copy the image to a USB flash drive. Insert the USB drive into the car radio's USB port. Go to Settings > Factory (Code:123456) > LOGO Setting. Select your image and click "Logo setting".
3.12.3 Animation Boot Logo
You can customize your favorite startup animation. Prepare a 32-bit bitmap animation with 1024*600 or 1280*720 resolution (or other resolutions depending on your screen) in Zip format. Copy the compressed animation package to the USB root directory interface. Insert the U-disk into the device USB port. Click on "Boot Animation > Pull down the status bar and click the "Menu" > An import box will pop up > Click "Import from external storage" and a password box will pop up > Enter the password "Topway". The Animation in the USB will be displayed. Select the zip and click "Confirm".
3.12.4 Radio Setting
Adjust the radio reception area: Settings > Factory (Code:123456) > Select radio region > Default Radio Area. For RDS: Settings > Factory (Code:123456) > Config info > RDS > ON/OFF.
3.12.5 Button Color
Click “Color” to select the desired physical button color. If you don't have the Color app, click “Settings > Factory (Code:123456) > Config info > Color > ON/OFF”.
4. Maintenance
To ensure the longevity and optimal performance of your ISUDAR multimedia player, follow these maintenance guidelines:
- Cleaning: Use a soft, dry cloth to clean the screen and exterior. Avoid abrasive cleaners or solvents that could damage the surface.
- Temperature: Avoid exposing the unit to extreme temperatures, both hot and cold, for extended periods.
- Software Updates: Periodically check for software updates from the official ISUDAR website or through the device's system settings to ensure you have the latest features and bug fixes.
- Wiring Integrity: Regularly inspect wiring connections for any signs of wear or damage. Ensure all connections remain secure.
5. Troubleshooting (FAQ)
5.1 General Issues
- Q: Why does the music stop when reversing?
A: For safety reasons, this feature is often enabled. You may need to adjust the reversing volume control in Settings > Reverse > Reversing System selection. - Q: How to change between Celsius and Fahrenheit units?
A: First, connect your car stereo to your phone's hotspot or WiFi. Then, open the weather app. Click the gear icon in the top right corner and select your preferred temperature unit. To switch the air conditioning temperature unit: Settings > Original > TEMP norm > Fahrenheit/Centigrade > confirm. - Q: How to change the speed unit?
A: Follow the path: Click the "Theme" APP icon > Click the gear icon in the upper right corner > Plugin > Speed unit. - Q: Why is the time or time zone not updating automatically?
A: Follow this path to set it: Settings > System > Date & Time, connect your car stereo to your phone's hotspot or WiFi and then open the "Set time automatically". - Q: Why is my weather information and location not updated?
A: You need to connect the car stereo to your mobile phone hotspot or WiFi, and the weather information and location will be updated online. - Q: The touch screen is not sensitive or the touch position is wrong.
A: Find a wired mouse and connect it to the USB port, then use the mouse cursor to click the following path to enter the settings: Settings > Factory (Code:123456) > Touch area key > POSITION. Then select "CALIBRATION", last you need to click the screen position with your finger instead of clicking the mouse. - Q: How to use the picture-in-picture function?
A: Settings > General > Video suspension window > ON. - Q: How to change the language?
A: Settings > More > System > Languages > System Languages.
5.2 Power and Display Issues
- Q: Black screen / can't power on.
A:- Press the RST button on the car stereo. This button is typically used to reset the system and may help resolve any temporary issues.
- Check if the car stereo is receiving a stable DC12V voltage. Ensure that the power source is providing the correct voltage to the stereo.
- Inspect the car stereo fuse to see if it is burnt out. If the fuse is blown, replace it with a new one of the same rating.
- Reconnect the BATT + / ACC / GND wires of the car stereo to the corresponding BATT + / ACC / GND wires of the original car wiring. Ensure the connections are secure and properly aligned.
5.3 Audio and Video Issues
- Q: My car has an amplifier system. Why is there no sound after installation?
A:- Please ensure that the power cable we provided is compatible with your car. If it's not, contact our after-sales support for a compatible power cable.
- Please connect the AUX cable of the power cable to the AUX cable of the RCA cable. AUX-L-IN = AUDIO OUT L; AUX-R-IN = AUDIO OUT R; AUX L = AUX IN L; AUX R = AUX IN R.
- Make sure the power cable we provided includes a separate blue AMP Control wire, which should be connected to the blue "AMP CONT" wire on the RCA harness.
- Turn on the amplifier switch in the settings: The amplifier and fan share a power supply. Therefore, please enable "Always on" in the Fan app.
- Q: Why can't I play videos while driving?
A: For safe driving, video playback is disabled. You need to set it to open as follows: Settings > Factory (Code:8888) > Brake setting > Close.
5.4 Connectivity Issues
- Q: Why are my steering wheel controls and rear-view camera functions not working properly?
A: You may need to reconfigure the Canbus type. Please contact our after-sales support to receive guidance on the specific Canbus settings for your vehicle model. - Q: How to set up automatic connection to CarPlay after connecting Bluetooth?
A: Setting follow: Settings > General > Application self start > Tlink5. - Q: If I don't have a factory-installed rearview camera and don't want the reversing image to be displayed when reversing, how do I turn it off?
A: Settings > Factory (Code: 123456) > Reverse Mode > Prohibit reversing.
6. Specifications
| Feature | Specification |
|---|---|
| Brand Name | ISUDAR |
| Model Series | T75 Series (T68S Plus, T68M Plus, T72X Plus) |
| Display Size | 13.1 inch |
| Resolution | 1920*1200P (2K HD) |
| Operating System | Android 10.0 OS / Android 12 |
| CPU | UIS7865 (8 Core: 8*A55 or 2*A75+6*A55) |
| RAM | 4GB / 8GB (DDR4) |
| ROM | 64GB / 128GB (EMMC) |
| Din | Double Din |
| Out Power | 4*47W |
| Voltage | 12 V |
| Network | 4G & 5G WiFi |
| Bluetooth | 5.0 Version |
| Radio Chip | ST7708 (FM/AM/RDS) |
| Amplifier Chip | ST7388 / ST7851 |
| Special Features | WiFi function, Steering wheel control, 3G/4G Network support, Can-Bus support, Built-in GPS, MP3 players, Voice Control, DSP, CarPlay, Android Auto, Reversing Input, Split Screen, Remote Controller Included |
| Digital Media Format | Mp3, MP4, WMA, JPEG |
| OSD Language | Multi-language support (Chinese, English, Arabic, German, French, Spanish, etc.) |
| Certification | CE |
| Network Radio | Support |
| On-line Weather | Support |
| On-line Theme | Optional |
| Package Dimensions | Length: 38 cm, Width: 31 cm, Height: 14 cm |
| Package Weight | 2.1 kg |

Figure 6.1: Model Comparison Table
7. Warranty and Support
For any questions or issues, please contact ISUDAR after-sales support.
- Manufacturer: Shenzhenshi Xinyingli Technology CO., Ltd.
- Address: Room 402, Building A5, Third Industrial Zone, Huaide Community, Fuyong Street, Baoan District, 518103, Shenzhen, China
- Email for After Service: xyl-supports@aliyun.com
8. User Tips
- Installation: While installation is generally straightforward, consider professional installation for optimal results, especially if dealing with complex wiring or CANbus systems.
- Customization: Take advantage of the extensive settings, including EQ, sound field adjustment, and online themes, to personalize your driving experience.
- Screen Protection: Some users recommend adding extra bubble wrap for long-distance delivery to prevent minor damage to components.
- Compatibility: Ensure to verify compatibility with your specific Jeep Renegade model year (e.g., 2014, 2022) as mentioned in Q&A.