1. Introduction
The ZIFON YT-2000 is an advanced AI-powered motorized pan-tilt head designed for photographers and videographers. It features intelligent face tracking, remote control capabilities, and a robust design to support various cameras and smartphones up to 2kg. This manual provides comprehensive instructions for setting up, operating, and maintaining your device to ensure optimal performance.
2. Package Contents
Please check the box for the following items:
- ZIFON YT-2000 Electric Pan-Tilt Head
- PTZ Remote Controller
- Universal Phone Clip
- USB Charging Cable (Type-C)
- Instruction Manual (this document)
3. Product Overview
Familiarize yourself with the main components and controls of the YT-2000 pan-tilt head.
- 1/4 Screw Connector: Universal interface for mounting cameras or phone clips.
- Face Tracking Lens: The AI sensor responsible for face recognition and tracking.
- Power Switch: Controls the device's power and activates tracking mode.
- Tracking Indicator: An LED light that indicates the current tracking status.
- Control Buttons (M, +, -, A, B): Used for manual adjustments and setting specific anchor points for programmed movements.
4. Setup
- Charging the Device: Connect the USB charging cable (Type-C) to the charging port on the YT-2000 and a standard 5V USB power adapter. The built-in 2000mAh battery provides over 10 hours of continuous operation on a full charge.
- Mounting on a Tripod: The base of the YT-2000 is equipped with a standard 1/4-inch universal interface. Securely attach the pan-tilt head to a compatible tripod or stand.
Figure 4.1: Tripod Mounting Interface - Attaching Camera or Smartphone:
- For Cameras: Use the 1/4 screw connector on the top quick mounting plate to securely attach your camera. The YT-2000 supports cameras with a maximum load capacity of 2kg.
Figure 4.2: DSLR Camera Mounted - For Smartphones: First, attach the universal phone clip to the 1/4 screw connector on the pan-tilt head. Then, insert your smartphone into the clip. The phone clip is adjustable to accommodate phones with 4.5-7 inch screens and allows for both horizontal and vertical angle adjustment.
Figure 4.3: Smartphone Mounted with Clip
- For Cameras: Use the 1/4 screw connector on the top quick mounting plate to securely attach your camera. The YT-2000 supports cameras with a maximum load capacity of 2kg.
- Leveling: Utilize the built-in level gauge on the side of the pan-tilt head to quickly and accurately set the horizontal position of your mounted camera or smartphone, ensuring stable and level footage.
Figure 4.4: Built-in Level Gauge
5. Operating Instructions
5.1 Power On/Off
To power on the device, slide the power switch to the 'ON' position. To power off, slide it to 'OFF'.
5.2 AI Smart Face Following
The YT-2000 utilizes an AI smart chip for precise face recognition and tracking. To activate this mode:
- Move the power switch downward to the 'TRACKING' position.
- The green light on the tracking indicator will illuminate continuously, signifying that the device is in face following state and actively scanning for faces.
- Start Tracking: Make an