FENVI 300Mbps Wireless WiFi Repeater User Manual

1. Product Overview

The FENVI 300Mbps Wireless WiFi Repeater is designed to extend the coverage of your existing Wi-Fi network, eliminate dead zones, and provide a stable, high-speed internet connection throughout your home or office. This device supports multiple operating modes, including Repeater and AP mode, offering flexibility for various networking needs. Its compact, wall-mount design ensures easy placement and operation.

2. Key Features

• High-Speed Transmission: Offers up to 300Mbps wireless transmission rate for smooth and efficient data transfer.
• Wide Application: Ideal for Small Office Home Office (SOHO) environments, providing extensive network coverage.
• Advanced Security: Equipped with a firewall function to protect your network from unauthorized access.
• Standard Compatibility: Complies with Wi-Fi 802.11n standards and is compatible with 802.11 b/g/n devices.
• Remote Control: Allows for convenient remote operation and management of your network.
• Signal Boosting: Amplifies existing Wi-Fi signals to extend range and eliminate dead zones, even through walls and floors.
• Multiple Working Modes: Supports Repeater mode for extending Wi-Fi range wirelessly and AP mode for creating a new Wi-Fi hotspot via a wired connection.
• Universal Compatibility: Works with a wide range of devices including TVs, computers, smartphones, Wi-Fi cameras, and smart home devices.
• Simple Setup: Features an easy setup process via mobile phone or computer, requiring no specialized technical knowledge.

3. Important Safety Notes

• To protect the life of the repeater and reduce product wear, avoid using the repeater for extended periods (more than 24 hours continuously). When not in use, please unplug it from the power supply.
• The actual color of the item may vary slightly from images due to monitor and lighting effects.
• Do not compare the Wi-Fi speed of the repeater directly with your main Wi-Fi router, as repeaters operate in half-duplex mode, which can inherently reduce speed. The primary purpose is to extend coverage, not necessarily to increase raw speed.

4. Setup Instructions

This section details the mobile phone setup process for the FENVI WiFi Repeater. For a visual guide, please refer to the user manual PDF available at FENVI User Manual (PDF).

4.1 Initial Setup (Repeater Mode)

IMPORTANT: Set up the extender NEAR your main router. Installation may fail due to weak signals if the extender is too far. After successful setup, you can relocate the extender to your desired location.

1. Plug In the Extender: Plug your WiFi extender into a power outlet. Wait for approximately 30 seconds. The power light should turn on. If not, press the 'Reset' hole on the bottom of the product for 8 seconds with a paperclip, then try again.
2. Connect to Extender SSID: On your mobile phone, go to Wi-Fi settings and connect to the SSID named "wifi-XXXX" (where XXXX are the last 4 digits of the MAC Address found on the back of the product). Note: You will not have internet access yet.
3. Access Setup Page: Open a web browser on your phone. If a setup interface doesn't automatically appear, manually enter the IP address 192.168.188.1 in the address bar.
4. Enter Default Password: When prompted, enter the default login password: admin.
5. Scan and Select Host Router: The extender will scan for available Wi-Fi networks. Select your main router's SSID from the list to be extended.
6. Enter Host Router Password: Enter the Wi-Fi password for your main router. Ensure the password is correct and does not contain special characters like `*&^%$#@!`, as the repeater may not identify them.
7. Set Extender SSID and Password: You can choose to keep the default extender name (e.g., "sohowifi-PRO") or set a new one. You can also set a new password for the extended network.
8. Confirm and Connect: Review the wireless information. Once confirmed, click "Start Connect" and wait 30-60 seconds for the repeater to connect to the router.
9. Verify Connection: After the setting is completed, observe the signal indicator light on the repeater. If it lights up, it indicates a successful relay.
10. Reconnect to Extended WiFi: Disconnect your phone from the repeater's initial SSID and reconnect to the newly created extended network (e.g., "sohowifi-PRO") to access the internet.

5. Operating Modes

The FENVI WiFi Repeater supports two primary operating modes:

5.1 Repeater Mode

In Repeater Mode, the device extends the range of your existing Wi-Fi network wirelessly. It receives the signal from your main router and re-broadcasts it, effectively expanding your Wi-Fi coverage to areas with weak or no signal. This mode is ideal for eliminating Wi-Fi dead zones without the need for additional cabling.

5.2 AP (Access Point) Mode

In AP Mode, the device creates a new Wi-Fi hotspot. You connect the repeater to your main router or modem using an Ethernet (RJ45) cable. The repeater then broadcasts a new wireless network, allowing you to share your internet connection without disclosing your private Wi-Fi network details. To set up AP mode:

1. Perform a factory reset on the repeater by pressing the 'Reset' button for 8 seconds.
2. Follow steps 1 to 3 of the Initial Setup (Section 4.1) to access the setup page.
3. On the setup page, click on "AP Settings".
4. Set the Wireless Password: Click "Auth Mode" and select an encryption method, typically "WPAPSKWPA2PSK/AES". Enter your desired password and click "Apply".
5. Connect an Ethernet cable from your modem/router to the LAN port of the repeater. You can then access the internet via the new Wi-Fi hotspot.

6. Troubleshooting

Q1: Cannot connect to the internet after finishing setup?

A1: Ensure the password entered for your main router is correct and does not contain special characters (e.g., *&^%$#@!). If it does, change your router's password to exclude them, as the repeater may not recognize them.

Q2: How to reset the repeater?

A2: With the repeater powered on, long-press the 'Reset' button (located on the side, not the WPS button) for 10 seconds.

Q3: What if I cannot access the Repeater's web management page?

A3:

• Ensure your computer or phone is connected to the extended network (the repeater's SSID).
• Verify your device is set to obtain an IP address automatically.
• If the repeater is already connected to your main router, check your router's DHCP client list to find the repeater's current IP address.
• If all else fails, reset the repeater and try the setup process again.

Q4: Why does the wireless transmission rate slow down when the signal is stronger after being repeated?

A4: All repeater devices operate in half-duplex mode, meaning they communicate one-way between the router and client devices. This doubles the transmission time, which can decrease the effective speed. It is recommended to connect to the extender when your home network connection is poor or when you need larger wireless coverage to eliminate 'dead zones'.

Q5: Why can't devices connected to the Repeater get an IP address or access the Internet?

A5:

• Check if MAC filtering, wireless access control, or an Access Control List (ACL) is enabled on your main router. Log into your router and disable these features.
• The repeater might not have successfully connected to your router. Reset the repeater and reconfigure it.
• The IP address of the router might be occupied, or the number of connected wireless devices has reached the limit. Reboot your main router, then reset and reconfigure the repeater.

7. Specifications

8. User Tips

• Optimal Setup Location: Always perform the initial setup of the repeater close to your main router to ensure a strong signal and prevent setup failures. Once configured, you can move it to a more suitable location.
• Password Considerations: When setting up, avoid using special characters in your Wi-Fi passwords for both your main router and the extended network, as some repeaters may have compatibility issues.
• Regular Resets: If you encounter persistent connectivity issues or cannot access the management page, a factory reset (long-pressing the reset button for 10 seconds) can often resolve the problem.
• Prolonging Device Life: To maximize the lifespan of your repeater, avoid continuous operation for more than 24 hours. Unplug it when not in active use.
• Understanding Speed: Remember that a repeater's primary function is to extend coverage, not necessarily to increase raw internet speed. Expect some speed reduction due to half-duplex operation.

9. Warranty and Support

The FENVI 300Mbps Wireless WiFi Repeater comes with a 2-year warranty. For any technical support or warranty claims, please contact the seller or manufacturer directly through their official channels.