1. Introduction
Thank you for choosing the CooSpo BC26 Wireless Bike Computer. This device is designed to provide accurate cycling data, including speed, distance, time, and altitude, using GPS and BEIDOU positioning. It features Bluetooth 5.0 for app synchronization and is built to withstand various weather conditions with its IPX7 waterproof rating. This manual will guide you through the setup, operation, and maintenance of your BC26 bike computer.

2. Setup
2.1 Package Contents
Before you begin, please ensure all items are present in your package:
- CooSpo BC26 GPS Bike Computer x 1
- GPS Bike Computer Mount x 1
- Micro USB Cable x 1
- Rubber pad for standard bike mount x 1
- Big size rubber ring x 2
- User Manual x 1 (This document, also available as PDF)

2.2 Charging the Device
It is recommended to fully charge the device before its first use.
- Open the rubber cover on the back of the device.
- Connect the device to a USB DC 5V power adapter or a computer using the provided Micro USB cable.
- During charging, the battery icon on the screen will flash. It will stop flashing once fully charged.
Important: The product has a built-in battery. Do not throw the product into a fire. Please choose an adapter that meets the rated voltage of the device to charge it, to avoid damage.

2.3 Installation
Follow these steps to install the BC26 bike computer on your bicycle:
- Place the rubber pad on your bike's handlebar or stem.
- Position the standard bike mount on top of the rubber pad.
- Secure the mount and pad using the big size rubber rings, wrapping them around the handlebar/stem and the mount.
- Align the BC26 device with the mount.
- Press down and rotate the BC26 clockwise until it locks securely into place.
- Ensure the device is firmly attached before riding.


2.4 Acquiring Satellite Signals
The BC26 uses GPS and BEIDOU for speed tracking and positioning. For accurate data, ensure the device is outdoors with a clear view of the sky.
- Upon power-on, the device will automatically search for GPS signals.
- It may take 15-90 seconds to locate satellite signals. Remain stationary during this process for better signal acquisition.
- Bad weather or dense forest areas may affect GPS signal strength.
- The device will automatically calibrate time and date once satellite signals are located.

2.5 Bluetooth Connection & App Sync
The BC26 can connect to the CoospoRide App via Bluetooth for data synchronization and settings management.
- Download the CoospoRide App: Search for "CoospoRide" in Google Play Store (for Android) or Apple App Store (for iOS).
- Power on the BC26 bike computer.
- Bind the Device: Open the CoospoRide App, navigate to
Me > Devices > Add Devices > Bike Computer. Select the BC26 from the list to bind it. Ensure your phone's Bluetooth is enabled and necessary permissions are granted. - Data Sync: In the Home page of the App, click on the connected device (top-left corner) to enter the BC26 page. Then, click "Data Sync" to access the record synchronization page.
- Synchronize Records: Select the records you wish to synchronize and click the sync icon.
Note: After connecting your Strava account (Me > More > Connect Third-Party Apps) within the CoospoRide App, data from the bike computer can be synced to Strava simultaneously. You cannot export .fit files directly from BC26 via USB.


3. Operating Instructions
3.1 Button Functions
The BC26 features three intuitive buttons:
- Up Left Button (▲):
- Short Press: Switch Data Type / Numerical Value.
- Left Down Button (✓ / ⚙):
- Short Press: Switch Data Type / Numerical Value.
- Long Press: Enter / Exit Setting Mode.
- Right Button (▶∣∣ / ):
- Short Press: Power on / Start Riding / Switch Settings.
- Long Press: Power off / End the ride.
3.2 Status Icons
Understand the various icons displayed on your BC26 screen:
| Icon | Description | Icon | Description |
|---|---|---|---|
| 88:88 | Time | TOT | Total riding time |
| ☀ | No satellite signal | UTC | Time zone |
| ☁ | Satellite signal level | h | Hour |
| 🔊 / 🔇 | Alert sound on / off | Ft/Km/m/mi | Unit |
| ▶ | Riding | AVG | Average speed |
| ∣∣ / ▶∣∣ | Manual pause / Auto pause | MAX | Maximum speed |
| | Bluetooth connected | MPH | Miles per hour |
| 🔋 | Battery level | KMH | Kilometers per hour |
| TIME | Riding time | DST | Distance |
| ALT | Altitude | ODO | Odometer (Total distance) |
3.3 Time Zone Setting
To set the time zone:
- Long press the Left Down button (⚙) to enter the setting mode (P1~P3). P1 is for time zone setting, and the currently set numerical value will flicker.
- Short press the Left Down button (✓) to switch the numerical value.
- Short press the Right button (▶∣∣) to confirm the current setting and move to the next digit or the next setting (P2 metric/imperial setting).
- The device will automatically save and exit after 15 seconds of no operation, or you can long press the Left Down button (⚙) to exit the setting.
3.4 Setting Metric and Imperial Units
To switch between KMH and MPH:
- Long press the Left Down button (⚙) to enter setting mode (P1~P3). Short press the Right button (▶∣∣) to enter P2 metric/imperial setting.
- Short press the Left Down button (✓) to switch between metric (KMH) and imperial (MPH). (Default is KMH).
- Short press the Right button (▶∣∣) to confirm the current setting and enter the next setting (P3 speed alert setting).
3.5 Maximum Speed Alert Setting
To set a maximum speed alert:
- Long press the Left Down button (⚙) to enter the setting mode (P1~P3). Short press the Right button (▶∣∣) to enter the P3 maximum speed alert setting. The currently set numerical value will flicker.
- Short press the Left Down button (✓) to increase or decrease the numerical value.
- Short press the Right button (▶∣∣) to confirm the current setting and move to the next digit or the next setting.
- Short press the Left Down button (✓) to set the prompt tone on/off.
- The device will automatically save and exit after 15 seconds of no operation, or you can long press the Left Down button (⚙) to exit the setting.

3.6 Cycling Operation
To start and manage your ride:
- Start Riding: Turn on the device, then short press the Right button (▶∣∣).
- Pause/Resume: During a ride, short press the Right button (▶∣∣) to pause or resume.
- End Ride: Long press the Right button (▶∣∣) to end the ride.
- Automatic Pause: If the speed is 0, there is no data during riding, or the speed is too low, the bike computer will automatically pause.
- Dormant Mode: If there is no speed data during riding, the computer will automatically enter dormant mode after 15 minutes. Press the Right button (▶∣∣) to return to the previous riding state.
3.7 Riding Data Display
The BC26 displays various riding data. You can switch between different data views:
- Short press the Up Left button (▲): Cycles through real-time speed, maximum speed, and average speed.
- Short press the Left Down button (✓): Cycles through time, distance, altitude, and a combined time & distance display mode, automatically switching data.
4. Maintenance
4.1 Water Resistance
The BC26 has an IPX7 water-resistant rating, meaning it can withstand splashes and rain. However, it is not designed for submersion. If riding in heavy rain, it is recommended to remove the bike computer and place it in a waterproof bag to prevent potential damage. Always ensure the protective rubber cover for the charging port is tightly closed.

4.2 General Care
- Do not open or modify the product.
- Do not disassemble or attempt to service this product yourself.
- This product is safe under normal and reasonably foreseeable operating conditions.
- If the product is operating improperly, contact COOSPO support.
- The product must be returned to the manufacturer for any service or repair.
5. Troubleshooting
- Device not powering on: Ensure the device is fully charged. If the battery is completely depleted, it may take a few minutes of charging before it can power on.
- GPS signal not acquired: Ensure you are outdoors with a clear view of the sky. Remain stationary for 3-5 minutes after powering on to allow the device to connect to satellites. Avoid dense forest areas or tall buildings during initial signal acquisition.
- Battery discharges quickly when turned off: Ensure the device is properly powered off (long press the Right button). If it's in dormant mode, it still consumes minimal power. Fully charge the device and monitor usage.
- No speed data displayed during riding: Check if GPS positioning is successful. If GPS signal is lost, speed data will display as "--.-".
- Cannot connect to CoospoRide App: Ensure Bluetooth is enabled on your phone and the BC26 is powered on. Grant all necessary permissions to the CoospoRide App. Try restarting both the device and the app.
- Speed Alert not working: Verify that the speed alert is enabled and the maximum speed value is set correctly in the settings (P3).
6. Specifications
| Feature | Specification (BC26) |
|---|---|
| Wireless | Bluetooth |
| Display | FSTN Screen, 2.3 inch |
| Automatic Backlight | Yes |
| Locate mode | GPS & BDS |
| Storage Format | .fit |
| Water Resistance | IPX7 |
| Weight | 54g |
| Language | English |
| Battery Capacity | 600mAh rechargeable lithium battery |
| Battery Life | 20 hours for a single use after fully charged (in GPS-enabled mode) |
| Material | PC+ABS |
| Dimension | 72.26 x 50 x 21.55 mm |
| File Transfer | Bluetooth (Specified App Compatible) |
| Certification | CE, FCC, RoHS, WEEE |

7. User Tips
- Mounting: The BC26 comes with a standard bike mount and rubber rings for easy installation. Ensure it's securely fastened to prevent movement during rides.
- Standalone Use: The BC26 can be used independently for tracking basic ride data (speed, distance, time, altitude) using its built-in GPS. You do not need to carry your phone during the ride for these functions.
- App for Advanced Features: For detailed analysis, firmware updates, and syncing with platforms like Strava, the CoospoRide App is essential. Connect your device to the app after your ride to transfer data.
- Speed Alert: Utilize the speed alert feature to stay within desired speed limits or to be notified when exceeding a certain pace. The beep sound can be toggled on or off.
- Automatic Backlight: The device automatically adjusts backlight based on sunrise and sunset times, ensuring visibility in varying light conditions.
8. Warranty & Support
8.1 Responsibility Disclaimer
The information contained in this manual is for reference only. The product described may be subject to alteration due to the manufacturer's continuing research and development plans, without prior announcement. The manufacturer shall not bear any legal responsibility for any direct or indirect, accidental or special damages, losses, and expenses arising from or in connection with this manual or the contained product.
8.2 FCC Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
8.3 Product Disposal
Waste electrical products should not be disposed of with household waste. Please recycle where facilities exist. Contact your local government or a retailer for additional information.
8.4 Manufacturer Contact
- Manufacturer: Shenzhen Coospo Tech Co., Ltd
- Address: 6F, Building A, Dingxin Science Park, Xinan Street, Baoan District, Shenzhen
- Contact: +86 (755) 23594795
- Email: support@coospo.com
- Website: www.coospo.com
For the full user manual in multiple languages (English, Spanish, German, French, Italian, Turkish, Japanese), please refer to the official PDF document available at: CooSpo BC26 User Manual (PDF)