feyree EV Charger CEE Female Plug 3 Pins Adapter Instruction Manual

1. Introduction

Thank you for choosing the feyree EV Charger CEE Female Plug 3 Pins Adapter. This adapter is designed to provide a waterproof connection for your EV charging needs, converting a standard EU plug to a CEE female plug. It is constructed from high-quality flame-retardant material, ensuring safety and durability. This manual provides essential information for the safe and efficient use of your adapter.

2. Safety Information

• Always ensure the adapter and all connections are dry before use.
• Do not use the adapter if it appears damaged or worn.
• Ensure the power source matches the adapter's specifications (e.g., 220V, 16A for the EU plug side).
• Avoid overloading the circuit.
• Keep out of reach of children.
• Consult a qualified electrician if you are unsure about your electrical installation.

3. Package Contents

Upon opening the package, you should find the following items:

• 1 x feyree EV Charger CEE Female Plug 3 Pins Adapter (EU plug to CEE female plug)

Video: Unboxing and initial inspection of the feyree EV Charger CEE Female Plug 3 Pins Adapter.

4. Specifications

Note: The specification table above refers to the 1 Phase 32A to 1 Phase 16A adapter variant. Other variants (3 Phase 16A, 3 Phase 32A) may have different specifications as shown in the image below.

Image: Detailed specification table for various feyree EV charger adapter types.

5. Setup Instructions

Follow these steps to correctly set up your feyree EV Charger CEE Female Plug 3 Pins Adapter:

1. Inspect the Adapter: Before each use, visually inspect the adapter for any signs of damage, cracks, or exposed wires. Ensure the pins are clean and free from debris.
2. Connect to Power Source: Plug the EU plug end of the adapter into a compatible 16A, 1-phase wall socket. Ensure the socket is properly grounded and can support the charging load.

Image: Connection of the adapter's EU plug to a 16A 1P wall socket.

3. Connect to EV Charger: Connect the CEE female plug end of the adapter to the male CEE plug of your EV charger cable. Ensure a secure and tight connection.

Image: Adapter connected between a wall socket and an EV charger.

For detailed wiring information regarding the CEE female plug, refer to the diagram below:

Image: Wiring diagram for the CEE female plug (L, N, PE).

6. Operating Instructions

Once the adapter is securely connected to both the power source and your EV charger, you can proceed with charging your electric vehicle. The adapter facilitates the connection; the charging process itself is controlled by your EV charger and vehicle.

• Power On: Ensure the power supply to the wall socket is active.
• Initiate Charging: Follow the instructions provided with your EV charger to begin the charging process.
• Current Adjustment (if applicable): If your EV charger has adjustable current settings, you can select the desired charging current. Note that the EU plug side of this adapter has a maximum rating of 16A.

Video: Demonstration of connecting the adapter and adjusting current on an EV charger.

7. Maintenance

• Cleaning: Clean the adapter regularly with a dry, soft cloth. Do not use abrasive cleaners or solvents. Ensure the adapter is unplugged and dry before cleaning.
• Storage: Store the adapter in a dry, cool place away from direct sunlight and extreme temperatures when not in use.
• Inspection: Periodically check the cable and connectors for any signs of wear, damage, or corrosion.

8. Troubleshooting

• No Power:
  • Check if the wall socket is active.
  • Ensure all connections are secure and fully inserted.
  • Verify that the circuit breaker has not tripped.
• Slow Charging:
  • Confirm that your EV charger's current setting is appropriate for the adapter's maximum 16A rating.
  • Check for any issues with the EV charger or vehicle.
• Adapter Overheating:
  • Immediately disconnect the adapter.
  • Ensure the current drawn does not exceed the adapter's rated capacity (16A for the EU plug side).
  • Check for proper ventilation around the adapter.

9. User Tips

• This adapter is compatible with EV chargers requiring a 32A current and operating at 220V, provided the input source is a standard 16A EU socket.
• The adapter facilitates a charging speed of up to 7KW, depending on your EV charger and vehicle's capabilities.
• Always double-check the dimensions and plug types to ensure compatibility with your specific EV charger and wall socket, as some users have noted variations in socket sizes.

10. Warranty and Support

For warranty claims or technical support, please contact the feyree Official Store directly. Keep your purchase receipt as proof of purchase.

11. Additional Resources

A comprehensive user manual in PDF format is available for download:

Download User Manual (PDF)