STIHL FS230 / FS235 / FR230 / FR235

Contents

Instruction Manual for STIHL Ignition Coil

Model: FS230 / FS235 / FR230 / FR235

Introduction

This manual provides essential information for the safe and effective installation, operation, and maintenance of your new ignition coil. Please read it thoroughly before attempting any installation or use. This ignition coil is a genuine replacement part designed for specific STIHL mower models to ensure optimal engine performance.

Package Contents

Upon opening the package, please verify that all components are present and undamaged:

  • 1 x Ignition Coil

What you see in the product images is what you will receive. Please ensure compatibility with your engine before installation.

Front view of the ignition coil with spark plug boot
Front view of the ignition coil with spark plug boot.
Close-up of the ignition coil showing 'S.STIHL' branding on the spark plug boot
Close-up of the ignition coil showing 'S.STIHL' branding on the spark plug boot.
Side view of the ignition coil, showing mounting bracket and part numbers
Side view of the ignition coil, showing mounting bracket and part numbers.
Another side view of the ignition coil, showing the mounting bracket and part numbers
Another side view of the ignition coil, showing the mounting bracket and part numbers.

Quick Start Guide

Follow these steps for a basic installation and test:

  1. Remove the old ignition coil from your mower.
  2. Connect the new ignition coil to the spark plug.
  3. Ensure all electrical and mounting connections are secure.
  4. Test the ignition system for proper functionality (e.g., attempt to start the engine).

Installation

Detailed installation steps for the ignition coil:

  • Preparation: Before beginning, ensure the mower's engine is cool and the spark plug wire is disconnected to prevent accidental starting. Refer to your mower's specific service manual for detailed instructions on accessing the ignition coil.
  • Removal of Old Coil: Carefully disconnect the spark plug wire and any other electrical connections from the old ignition coil. Unbolt and remove the old coil from its mounting position.
  • Installation of New Coil: Position the new ignition coil in the same location as the old one. Secure it with the appropriate bolts, ensuring it is firmly mounted.
  • Connections: Reconnect the spark plug wire to the new coil's terminal. Ensure a snug fit. Reattach any other electrical wires that were disconnected during removal. Double-check all connections for security.
  • Gap Adjustment (if applicable): Some ignition coils require a specific air gap between the coil and the flywheel. Consult your mower's service manual for the correct gap specification and adjustment procedure.
  • Final Check: Verify that all tools are removed from the engine area and that all components are properly secured.

Operation

The ignition coil is a critical component of your mower's ignition system, responsible for generating the high voltage required to create a spark at the spark plug. Once correctly installed, it operates automatically as part of the engine's normal function. No user intervention is required for its operation.

Maintenance

To ensure the longevity and proper functioning of your ignition coil:

  • Keep Dry: Protect the ignition coil from excessive moisture and water exposure.
  • Cleaning: Periodically wipe the exterior of the coil with a damp cloth to remove dirt, dust, and debris. Ensure the coil is dry before operating the mower.
  • Inspect Connections: Regularly check all electrical connections to the ignition coil and spark plug for corrosion or looseness. Clean or tighten as necessary.

Troubleshooting

If your mower experiences ignition-related issues after installing the new coil, consider the following:

  • No Spark:
    • Check all connections to ensure they are secure and free of corrosion.
    • Verify the spark plug is clean and properly gapped.
    • Ensure the engine kill switch is in the "Run" position.
    • Inspect the spark plug wire for damage.
  • Weak Spark:
    • Ensure the coil-to-flywheel air gap is correctly set according to your mower's specifications.
    • Check for any debris or rust between the coil and flywheel that might interfere with magnetic induction.
  • Engine Misfires:
    • Confirm the spark plug is the correct type and heat range for your engine.
    • Check for proper fuel delivery and carburetor settings, as these can mimic ignition issues.

If problems persist, it is recommended to consult a qualified service technician or refer to your mower's comprehensive service manual.

Specifications

AttributeDetail
Model NumberFS230 Ignition coils (Compatible with STIHL FS230, FS235, FR230, FR235)
Part Number4151-400-1300
OriginMainland China
CertificationCE
DIY Supplies CategoryWoodworking
High-concerned chemicalNone
Package Dimensions (approx.)Length: 10 cm, Width: 10 cm, Height: 10 cm
Package Weight (approx.)0.2 kg

Safety Information

Please observe the following safety guidelines:

  • General Warnings:
    • Consult a doctor before use (Note: This warning appears in the provided PDF, though its relevance to an ignition coil is unusual. Always prioritize personal safety.)
    • Ensure clear space for movement when working on machinery.
  • Product Handling:
    • Keep the ignition coil dry.
    • Wipe with a damp cloth for cleaning. Do not immerse in liquids.
    • Always disconnect the spark plug wire and ensure the engine is off and cool before handling the ignition coil or performing any maintenance.

User Tips

No specific user tips were available from reviews or Q&A for this product.

Support

For further assistance or if you encounter any issues, please contact our store support. You may also refer to the original user manual PDF for additional information: User manual (PDF).

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.