1. Introduction
This manual provides detailed instructions for the safe and effective operation of your 4DRC 4D-V8 Mini Drone. Please read this manual thoroughly before use and retain it for future reference.
Safety Guidelines
- This product is suitable for ages over 14. Children under 14 years old must not operate this product.
- Always ensure the drone is operated in a manner that prevents harm to individuals or property. Maintain a safe distance of 2-3 meters from people during flight and landing.
- Do not disassemble or modify the aircraft, as this may cause malfunction.
- Keep small parts out of reach of children to prevent accidental ingestion or suffocation.
- Avoid flying in areas with accumulated water or on roads to prevent accidents.
- When charging the rechargeable battery, adult supervision is required. Keep the battery away from flammable materials and do not leave it unattended.
- Do not short-circuit, decompose, or throw the battery into fire. Avoid placing the battery in high-temperature environments.
- Maintain a safe distance from high-speed rotating propellers to avoid injury.
- The motor can become hot; avoid touching it to prevent burns.
- Do not direct the LED laser radiation into eyes.
- Turn off the drone and unplug the battery after use. Allow 30 minutes of rest before recharging to prevent battery damage.
- Do not operate the model near your ears; misuse may cause hearing damage.
- Avoid flying in no-fly zones designated by aviation authorities.
2. Package Contents
Verify that all items are present in your package:
- Aircraft (Drone) x 1
- USB Charging Cable x 1
- Fan Blades x 4
- Lithium Battery x 1 (or more, depending on variant)
- Fan Blade Replacement Tool x 1
- Screwdriver x 1
- Operating Instructions x 1
- Remote Controller x 1 (if included in variant)

3. Product Overview
Drone Components

Remote Control Components

4. Setup
4.1 Fan Installation
If fan blades need replacement, use the attached tools. If an A1/A2 blade is broken, replace it with another A1/A2. If a B1/B2 blade is broken, replace it with another B1/B2. Incorrect installation will prevent the aircraft from taking off.
Note:
- Fan blades are marked with A1, A2, B1, and B2. A1 = A2, B1 = B2.
- Install correctly according to the diagram to ensure proper flight.

4.2 Battery Charging (Drone)
- Buckle the battery lock of the aircraft and remove the battery.
- Insert the USB interface of the charging cable into a computer's USB port or a 5V-2A power adapter.
- Connect the other end of the charging cable to the battery socket.
- The USB red light on the aircraft will turn off during charging. It will remain on when the battery is fully charged.
Warning: Only use the factory-provided charging cable. Other charging cables may cause damage.

4.3 Remote Control Battery Installation
- Remove the battery cover on the back of the remote control.
- Insert 3 x 1.5V AAA batteries (not included) according to the polarity markings inside the compartment.
- Replace the battery cover.
Note:
- Ensure correct polarity (+/-) when inserting batteries.
- Do not mix old and new batteries, or different types of batteries.

4.4 Remote Control Phone Holder Installation
Load your mobile phone onto the remote control's holder as shown in the figure.

4.5 APP Download and Installation
To use APP control features, download the '4D FLY' application:
- For Android devices, scan the provided QR code and open the download link in your browser.
- For iOS devices, scan the provided QR code to download from the App Store.
- Once installed, open the '4D FLY' app to access the control interface.

5. Pre-Flight Preparation
5.1 Environmental Requirements
Fly in an outdoor open environment without rain or snow, and with wind speeds less than 3. Stay away from people, trees, wires, tall buildings, airports, and signal transmission towers.
5.2 Remote Control Pre-Flight Steps
- Turn on the drone and place it on a horizontal surface with the nose facing forward. The front blue and red lights will flash, indicating it's in frequency matching state.
- Press and hold the power switch button on the remote control. The power indicator will turn on.
- Push the throttle lever (left joystick) all the way up, then all the way down. Code-matching is successful when the drone's lights stop flashing and remain solid.
- Horizontal Calibration: Long press the calibration key on the remote control. The drone's LED lights will flash, then become solid, and the remote control will emit a "beep" sound, indicating successful calibration. Ensure the drone is on a horizontal plane during this step.
Warning: Ensure both the aircraft and remote control have sufficient power before attempting to take off.
5.3 APP Pre-Flight Steps
- Turn on the drone and place it on a horizontal surface with the nose facing forward. The front blue and red lights will flash.
- On your mobile device, go to Wi-Fi settings and connect to the network named "4DRC-4K-********".
- Open the '4D FLY' app. Click the 'OFF' button, then turn on the touch rocker. Click the checkmark icon. The drone's lights will turn on normally, indicating successful frequency matching.
- Horizontal Calibration: In the app interface, click the "correction" icon. The drone's LED lights will flash and then become solid, indicating successful calibration. Ensure the drone is on a horizontal plane during this step.
6. Operation
6.1 Basic Flight Controls (Remote Control & APP)
| Control Action | Drone Response |
|---|---|
| Left Joystick Up (Throttle) | Increases main blade rotation, drone rises. |
| Left Joystick Down (Throttle) | Decreases main blade rotation, drone descends. |
| Left Joystick Left (Rudder) | Drone nose turns left. |
| Left Joystick Right (Rudder) | Drone nose turns right. |
| Right Joystick Up (Rudder) | Drone moves forward. |
| Right Joystick Down (Rudder) | Drone moves backward. |
| Right Joystick Left (Rudder) | Drone fuselage deviates left. |
| Right Joystick Right (Rudder) | Drone fuselage deviates right. |
6.2 One-Key Take-off and Landing
After unlocking (or after successful pre-flight setup), gently press the "One Key Takeoff/Landing" button on the remote control or the corresponding icon in the APP. The aircraft will automatically rise to approximately 1 meter and hover. Press the button again to initiate a slow, automatic landing.
Note: This function is recommended for normal use. The start/stop function (pushing left control lever up) is primarily for uncontrolled states.
6.3 360° Roll
To perform a 360-degree roll, ensure the drone is at least 1.5 meters above the ground. It's best to execute rolls during ascent to maintain altitude.
- Left Roll: Short press the 360° roll button, then push the right joystick to the left.
- Right Roll: Short press the 360° roll button, then push the right joystick to the right.
- Forward Roll: Short press the 360° roll button, then push the right joystick upward.
- Backward Roll: Short press the 360° roll button, then push the right joystick downward.
6.4 Headless Mode
When the drone is powered on and code-matched, its initial orientation is set as the front for headless mode. If you need to adjust the direction, restart code-matching. To activate/deactivate headless mode, short press the "headless mode" function key on the remote control or the corresponding icon in the APP.
Special Prompt: Ensure the aircraft is aligned straight and the gyroscope automatically detects the straight line for accurate headless mode flight.
6.5 One-Key Return
If the drone flies too far, use the one-key return function. When activating, the remote control must be directly facing the tail of the aircraft. Press and hold the one-key home button on the remote control. The remote control will beep, and the drone will return automatically. Any joystick operation will cancel the return function.
6.6 Speed Switching
The drone defaults to low-speed mode. Gently press the speed switch button on the remote control (or click the "30%" icon in the APP) to cycle through speeds:
- One "beep" sound: Low-speed gear.
- Two "beep" sounds: Medium-speed gear.
- Three "beep" sounds: High-speed gear.
6.7 Fine Tuning
If the aircraft drifts during flight, use the fine-tuning buttons:
- Forward/Backward Fine-tuning: If the drone drifts backward, press and hold the forward fine-tuning key. If it drifts forward, press and hold the backward fine-tuning key.
- Left/Right Fine-tuning: If the drone drifts right, press and hold the left fine-tuning key. If it drifts left, press and hold the right fine-tuning key.
6.8 Induction Mode (Gesture Control)
Press the remote control/induction switch button to enter induction mode. The drone can then be controlled by gestures. Keep your palm approximately 10 cm from the drone's body. If the drone flies too high to be detected, it will automatically descend after 5-15 seconds.

6.9 Inductive Roll
In induction mode, place both hands on the left and right inductive heads of the drone. After two seconds, the drone will automatically perform a 360° roll.
6.10 Throw Flight Mode
After powering on and placing the drone on a horizontal plane, if no remote control frequency matching occurs within 3 seconds, hold the drone, stretch it forward, wait for the blue and red lights to flash slowly, then throw it upward or swing your hand downward. The drone will automatically take off.
6.11 Stop Flight
To stop the drone's flight, simply take the aircraft and turn it upside down.
6.12 APP Specific Functions
- Media Library: Access recorded videos and pictures.
- Orbit Flight: Draw a flight path on the app's sketchpad, and the drone will follow it.
- Gravity Sensor Control: Swing your phone to control the drone's flight.
- Voice Control: Get close to your phone and speak flight instructions.
- VR Mode: Experience immersive flight with VR glasses (not included) through your mobile phone.


7. Maintenance
7.1 General Care
- Keep the drone clean and free from dust and debris.
- Store the drone and its components in a dry place, away from direct sunlight and extreme temperatures.
- Regularly check propellers for damage and replace if necessary.
7.2 Battery Care
- Always disconnect the battery from the drone when not in use to prevent damage.
- Do not overcharge or over-discharge the battery.
- If the drone will not be used for an extended period, store the battery at approximately 50% charge.
8. Troubleshooting
8.1 Common Issues and Solutions
| Problem | Possible Cause | Solution |
|---|---|---|
| Drone does not take off / unstable flight | Incorrect fan blade installation, low battery, improper calibration, wrong code matching. | Check fan blade orientation (A1/A2, B1/B2). Ensure batteries are charged. Perform horizontal calibration. Re-do code matching. |
| Remote control not responding | Low remote control battery, not paired correctly. | Replace AAA batteries in remote. Re-perform code matching procedure. |
| APP cannot connect to drone Wi-Fi | Drone Wi-Fi not active, incorrect Wi-Fi selection, interference. | Ensure drone is powered on. Select the correct Wi-Fi network ("4DRC-4K-********"). Try moving to an area with less signal interference. |
| Drone drifts during flight | Needs fine-tuning, not calibrated on a horizontal surface. | Use the fine-tuning buttons on the remote control. Re-perform horizontal calibration on a flat surface. |
| Short flight time | Battery not fully charged, aging battery. | Ensure battery is fully charged (approx. 40 minutes). Consider purchasing a new battery if performance degrades significantly. |
9. Specifications
| Feature | Detail |
|---|---|
| Model Number | 4D-V8 |
| Brand Name | 4DRC |
| Material | ABS Plastic and Electronic Components |
| Drone Weight | About 32g |
| Takeoff Weight | About 55g |
| Dimensions (Unfolded) | 13 x 11 x 4 cm |
| Motor Type | 716 Brushed Coreless Motor |
| Gyro | 6-axis |
| Frequency | 2.4G |
| Control Channels | 4 Channels |
| Drone Battery | 3.7V 650mAh Lipo Battery (Modular) |
| Charging Voltage | 3.7V |
| Charging Time | 40 minutes |
| Flight Time | 11-15 minutes |
| Remote Control Battery | 3 x 1.5 AAA Battery (not included) |
| Remote Distance | 50-80m |
| FPV Distance | 30-50m |
| FPV Type | WiFi |
| Video Capture Resolution | 1080p FHD, 720P HD, 2K QHD, 480P SD (depending on variant) |
| Camera Angle | Fixed at 25° |
| Operator Skill Level | Beginner, Intermediate, Expert |
| Indoor/Outdoor Use | Indoor |
| Features | App-Controlled, Altitude Hold Mode, Headless Mode, One-Key Take-off/Landing, 360° Roll, Gesture Control, Voice Control, Trajectory Flight, Gravity Sensor, Modular Battery, Full Propeller Protection |
10. User Tips
- Extra Batteries: If you need additional batteries, please contact the seller or manufacturer for compatible spare parts.
- Battery Life: The drone's battery typically lasts 11-15 minutes per charge. Ensure it's fully charged for optimal flight time.
- Charging: Always use the provided USB charging cable and a 5V-2A power source.
- Remote Control Adjustment: The left joystick on the remote control is used for vertical adjustments (up and down).
- Acrobatic Mode: While a dedicated "acro mode" isn't specified, the drone supports 360-degree flips and rolls for dynamic flight.
11. Warranty and Support
11.1 Warranty
This product comes with a 15-day warranty from the date of purchase. Please retain your proof of purchase for any warranty claims.
11.2 Further Assistance
For any questions or issues not covered in this manual, please refer to the official user manual PDF available at: User manual (PDF) or contact the seller for support.