Introduction
This manual provides detailed instructions for the installation, operation, and maintenance of your Range Tour 1080P Rear View Camera. This camera is designed to enhance the recording capabilities of compatible Dash Cam DVR systems by providing a high-definition rear view.

Figure 1: Range Tour 1080P Rear View Camera with 6m cable.
Compatibility
This rear view camera is specifically designed for use with the following Dash Cam DVR models:
- D90 4 Channer Dash Camera
- D40 3 Channer Dash Camera
- D70 3 Channer Dash Camera
Important Note:
- This camera is NOT compatible with the D90 3 Channer Dash Camera.
- This camera is NOT compatible with Android Streaming Media Mirror Cameras.
- Always verify compatibility with your specific Car DVR model before installation.
Setup and Installation
Follow these steps to properly install your rear view camera:
- Choose Mounting Location: Select a suitable location on the rear of your vehicle for the camera. Common locations include above the license plate or on the rear window. Ensure the camera has a clear, unobstructed view.

Figure 2: Front view of the camera, showing the lens.
- Secure the Camera: Mount the camera securely using appropriate fasteners or adhesive (not included, typically provided with the main DVR or vehicle). The camera features a 360-degree rotatable lens, allowing you to adjust the viewing angle after mounting.

Figure 3: Various angles of the camera, highlighting its compact design and rotatable lens.
- Route the Cable: Carefully route the video cable from the rear camera to your main Dash Cam DVR unit. Ensure the cable is tucked away safely to avoid interference with vehicle operations or damage. Available cable lengths are 6m, 10m, 15m, and 20m.

Figure 4: The 3.5mm jack cable connecting the rear camera to the DVR.
- Connect to DVR: Plug the 3.5mm jack of the rear camera cable into the designated rear camera input port on your compatible Dash Cam DVR.

Figure 5: Detailed view of the 3.5mm jack, indicating its size.
- Wiring Diagram (4-pin connector): The camera uses a 4-pin connector. Refer to the diagram below for pin assignments.

Figure 6: 4-pin connector wiring diagram. Pin 1: Back, Pin 2: VCC, Pin 3: AV, Pin 4: GND.
- Test Functionality: After connecting, power on your Dash Cam DVR and verify that the rear camera feed is displayed correctly. Adjust the camera's rotation as needed for optimal viewing.
Operating Instructions
The Range Tour 1080P Rear View Camera functions as an extension of your compatible Dash Cam DVR. Once properly installed and connected, it will automatically begin recording the rear view of your vehicle when the main DVR is active.
- Automatic Recording: The camera records continuously in conjunction with your main DVR.
- High Definition: Captures video in 1920*1080P resolution.
- Wide Angle View: Provides a 170-degree wide-angle view to cover a broad area behind your vehicle.
- Adjustable Lens: The lens can be rotated 360 degrees to achieve the desired recording angle.
Refer to your main Dash Cam DVR's instruction manual for specific settings related to multi-channel recording, viewing modes, and playback options.
Maintenance
To ensure optimal performance and longevity of your rear view camera, follow these maintenance guidelines:
- Lens Cleaning: Regularly clean the camera lens with a soft, lint-free cloth. If necessary, use a small amount of lens cleaning solution. Avoid abrasive materials or harsh chemicals that could scratch the lens.
- Cable Inspection: Periodically check the video cable for any signs of wear, kinks, or damage. Ensure all connections are secure.
- Mounting Check: Verify that the camera remains securely mounted to your vehicle. Re-tighten or re-secure if any looseness is detected.
- Environmental Protection: While designed for automotive use, avoid exposing the camera to extreme temperatures or direct high-pressure water sprays (e.g., during car washes) that could compromise its seals.
Troubleshooting
If you encounter issues with your Range Tour Rear View Camera, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| No image or signal from the rear camera. |
|
|
| Poor image quality (blurry, distorted). |
|
|
| Camera not rotating or stuck. |
|
|
Specifications
| Feature | Detail |
|---|---|
| Brand Name | Range Tour |
| Lens Material | Plastic + Glass |
| Shell Material | Plastic |
| Lens Resolution | 1920*1080P |
| Lens Angle | 170 Degree |
| Lens Rotatable | 360 Degree |
| Interface | 3.5mm |
| Wire or Wireless | Wire |
| Length of Video Cable | 6M, 10M, 15M, 20M (selectable) |
| Origin | Mainland China |
User Tips
- Verify Compatibility: Before purchasing or installing, double-check that your main Dash Cam DVR model (D90 4 Channer, D40 3 Channer, D70 3 Channer) is explicitly supported. This camera is not a universal fit.
- Cable Management: When routing the cable, use cable clips or ties to secure it neatly and prevent it from interfering with airbags or other vehicle components.
- Night Vision: The specifications do not explicitly mention night vision or infrared capabilities. Assume standard low-light performance unless otherwise stated by your main DVR's features.
Warranty and Support
For warranty information, technical support, or service inquiries, please contact the seller or manufacturer directly. Keep your purchase receipt as proof of purchase.