1. Introduction
The ZUIDID AD8815B Reverse Camera Interface is designed to seamlessly integrate aftermarket front and rear cameras with your original Audi vehicle's display system. This interface allows you to add valuable parking assistance features without modifying or replacing your factory head unit, providing dynamic parking guidelines and retaining original radar detection display.
2. Compatibility
This interface is compatible with the following Audi models and head units:
- Audi A4, A5, S4, S5: Model years 2009-2016 with 6.5-inch or 7-inch screen.
- Audi Q5: Model years 2009-2018 with 6.5-inch or 7-inch screen.
- Compatible Head Units: Audi MMI 3G, Audi Symphony, or Audi Concert.
3. Key Features
- Dynamic Parking Guidelines with original Radar detection image display.
- Perfect integration with the original vehicle equipment.
- Dedicated auto-switching input for the reverse camera.
- Ability to add an optional front camera.
- Plug & Play installation, requiring no complex programming.
- Non-destructive installation that does not damage the original vehicle wiring harness.
4. Package Contents
The standard package typically includes:
- ZUIDID AD8815B Camera Interface Module
- Main Wiring Harness (Plug & Play)
- Video Input Cables (RCA)
- Optional Rear View Camera (if selected)
- Optional Front Camera (if selected)
5. Setup and Installation
The installation process is designed to be non-destructive and 'Plug and Play'. It involves inserting the interface with the original car sockets, ensuring no damage to existing wiring and no new programming is required. This also means it will not affect the normal warranty of your vehicle's service center.
5.1. Wiring Diagram Overview
The diagram illustrates the main connections:
- The Interface module connects to the CD player (MMI 3G Plus & 3G Head Unit) and the Air conditioning panel.
- The Camera(s) connect to the Interface via RCA video inputs.
- A connection to the Gateway may be required for certain vehicle configurations.
5.2. Important Installation Notes
- Parking Sensors (2009-2012 Models): If your car is from 2009 to 2012 and the interface does not display parking sensors, you need to connect the interface to the vehicle's Gateway. The Gateway is typically located inside the glove box.
- Manual Transmission Vehicles: For cars with a manual gearbox, you must connect the Brown wire from the interface harness to the vehicle's reverse light power source.
- Camera Power: The Pink wire of the interface provides a 12V power supply for both the front and rear cameras. Ensure your cameras are compatible with a 12V power input.
For detailed step-by-step instructions, please refer to the official PDF user manual available for download (see Section 9).
6. Operating Instructions
6.1. Rear Camera Operation
When the vehicle is shifted into Reverse (R) gear, the display will automatically switch to the rear camera view. Dynamic parking guidelines will be overlaid on the screen, adjusting with steering wheel input. Original radar detection information will also be displayed.
6.2. Front Camera Operation
The front camera can be activated and deactivated using the following methods:
- Automatic Transmission: When shifting from Reverse (R) to Drive (D) gear, the front camera will automatically activate. It will exit the front camera view after approximately 15 seconds.
- Manual Transmission: After exiting Reverse (R) gear, the front camera will activate. It will exit the front camera view after approximately 10 seconds.
- Manual Activation/Deactivation: Long press the Voice button on your steering wheel for 2 seconds to manually enter or exit the front camera view at any time.
7. Specifications
| Attribute | Value |
|---|---|
| Model Number | AD8815B |
| Lens Material | Plastic + Glass |
| Guiding Line | Yes |
| Length of Video Cable | 6M |
| Shell Material | Aluminium alloy |
| Wire or Wireless | Wire |
| Origin | Mainland China |
| Material | Stainless steel |
| Certification | CE, FCC, RoHS |
| Video Output Type | LVDS |
| Radar Sensors Display | Yes |
| Voltage Compatibility | 12V (for MMI 3G) / 24V (for Symphony or Concert) |
| Package Size | 25 x 20 x 7 cm |
| Gross Weight | 0.7 kg |
8. Troubleshooting
- No parking sensors displayed (2009-2012 models): Ensure the interface's gateway connection is correctly made, typically found in the glove box.
- Front camera not activating/deactivating correctly: Verify the gear selection logic (automatic activation in 'D' after 'R' for auto transmission, or after 'R' for manual transmission). Also, try manually activating/deactivating by long-pressing the steering wheel's Voice button for 2 seconds.
- No camera image on screen: Check all wiring connections, especially the main harness to the head unit, the Pink 12V power wire for the cameras, and the RCA video cables from the cameras to the interface. Ensure cameras are properly powered and connected.
- Poor image quality: Ensure camera lenses are clean and free from obstructions. Check video cable connections for any looseness or damage.
9. User Tips
- Installation Guidance: For visual learners, it is highly recommended to watch any available installation videos or consult the detailed PDF manual for step-by-step instructions.
- Camera Type: This interface is designed to work with standard CVBS (Composite Video Broadcast Signal) cameras. Ensure any aftermarket cameras you purchase are CVBS compatible.
- Vehicle Specifics: Always double-check your Audi's exact model year and head unit type (MMI 3G, Symphony, or Concert) to ensure full compatibility before installation.
10. Warranty and Support
For any technical assistance, warranty claims, or further inquiries, please contact the seller or manufacturer directly. A comprehensive user manual in PDF format is available for download, providing additional details and diagrams:
