Baofeng BF-888S Desktop Charger

Contents

Baofeng BF-888S USB Desktop Charger Instruction Manual

Model: BF-888S Desktop Charger

Brand: Baofeng

1. Introduction

This manual provides essential instructions for the safe and efficient use of your Baofeng BF-888S USB Desktop Charger. This charger is designed to power your Baofeng two-way radios, specifically models BF-888S, BF-666S, and BF-777S, from various USB power sources.

2. Safety Information

  • WARNING: Battery charging is only applicable to the specified charger. Do not attempt to charge other battery types or models.
  • Always shut off the radio's power while charging to ensure proper and safe charging.
  • Do not expose the charger to rain or moisture.
  • Do not operate the charger if it has been damaged in any way.
  • Keep the charger away from heat sources and direct sunlight.
  • Ensure the power source matches the charger's specifications.
  • Unplug the charger from the power source when not in use or before cleaning.
Warning label inside the charger indicating battery charging is only for specified charger and to shut off power while charging.
Warning label inside the charger base.

3. Package Contents

Please check the package for the following items:

  • 1x USB Desktop Charger

4. Setup

  1. Place the USB Desktop Charger on a stable, flat surface.
  2. Connect the USB cable from the charger to a compatible USB power source (e.g., car USB port, power bank, phone charger, computer USB port).
  3. Ensure the power source provides sufficient output for charging (refer to specifications).
Top view of the Baofeng USB desktop charger with its integrated USB cable.
Top view of the USB Desktop Charger.
Angled view of the Baofeng USB desktop charger, showing the USB cable and charging slot.
Angled view of the USB Desktop Charger.

5. Operating Instructions

  1. Ensure your Baofeng radio (BF-888S, BF-666S, or BF-777S) is powered OFF before placing it in the charger.
  2. Carefully insert the radio, with its battery attached, into the charging slot of the desktop charger. Ensure it is seated correctly and makes proper contact with the charging terminals.
  3. Observe the charging indicator light on the charger:
    • RED light: Indicates that the battery is currently charging.
    • GREEN light: Indicates that charging is complete.
  4. Once the green light appears, the radio is fully charged and can be removed from the charger.
Baofeng walkie-talkie placed in the desktop charger, with a red light indicating it is charging.
Radio in charger, red light indicates charging.
Close-up of the charger with a green light, indicating charging is complete.
Charger with green light, indicating charging is complete.

6. Maintenance

  • Clean the charger regularly with a soft, dry cloth. Do not use liquid cleaners or solvents.
  • Ensure the charging terminals are free from dust and debris to maintain good contact.
  • Store the charger in a cool, dry place when not in use.

7. Troubleshooting

Problem Possible Cause Solution
Charging indicator light does not turn on. No power to the charger; radio not seated correctly; faulty USB cable/power source. Check USB connection and power source. Re-seat the radio in the charger. Try a different USB cable or power source.
Radio does not charge or charges slowly. Radio not powered off; dirty charging terminals; low power USB source; damaged battery. Ensure radio is OFF. Clean charging terminals. Use a higher output USB power source. Test with a different battery if available.
Charger feels unusually hot. Overload; poor ventilation; faulty unit. Disconnect immediately. Ensure adequate ventilation. Do not use if overheating persists.

8. Specifications

Feature Detail
Model Number BF-888S Desktop Charger
Item Type Chargers
Compatibility Baofeng BF-888S, BF-666S, BF-777S Two-Way Radios
Input AC 110V-240V 50Hz (via USB power source)
Output DC 8.4V --- 500mA
Dimensions (L x W x H) Approx. 20 cm x 20 cm x 20 cm
Weight Approx. 0.1 kg
Origin Mainland China
Bottom view of the charger showing input and output specifications.
Charger bottom with specifications.

9. User Tips

  • This charger is highly effective for on-the-go charging, including in vehicles. Many users report quick charging times when powered from a truck's USB port.
  • The charger is generally robust and functional as per specifications. If you desire extra stability, consider adding small non-slip rubber feet to the bottom of the unit.

10. Warranty and Support

For warranty information and technical support, please refer to the documentation provided with your original Baofeng radio or contact your retailer. Keep your purchase receipt as proof of purchase.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.