K&F CONCEPT DJI Mini 3 Pro Filter

Contents

K&F CONCEPT Drone Filter for DJI Mini 3 Pro User Manual

Variable ND2-ND32 / ND32-ND512 Camera Coating Optical Glass Lens

Introduction

Thank you for choosing the K&F CONCEPT Drone Filter for your DJI Mini 3 Pro. These high-quality optical glass filters are designed to enhance your drone photography and videography by providing precise light control and improved image quality. This manual will guide you through the installation, operation, and maintenance of your new filters.

Setup and Installation

The K&F CONCEPT filters feature an ultra-lightweight design and quick-release mechanism for easy and secure attachment to your DJI Mini 3 Pro drone's camera gimbal.

Filter Installation Steps:

  1. Gently rotate and remove the original filter from your DJI Mini 3 Pro camera.
  2. Align the K&F CONCEPT filter with the camera lens, ensuring the correct orientation.
  3. Rotate the filter clockwise until it locks securely into place. Ensure the buckle is hooked.
  4. Verify that the filter is firmly attached and does not obstruct gimbal movement.
Step-by-step guide for replacing the filter on DJI Mini 3 Pro
Step-by-step guide for replacing the filter on DJI Mini 3 Pro.

Gimbal Compatibility:

Each K&F CONCEPT filter weighs only 1.1g, ensuring it does not adversely affect the drone's gimbal performance or calibration. The ultra-lightweight technology has been rigorously tested for optimal compatibility.

Filter installed on drone, emphasizing no effect on gimbal, only 1.1g
The filter is designed to have no effect on the gimbal, weighing only 1.1g.

Operating the Variable ND Filters

Variable Neutral Density (VND) filters allow you to control the amount of light entering your drone's camera, enabling longer exposure times and wider apertures in bright conditions without overexposing your footage.

Adjusting Light Reduction:

  • ND2-ND32 Filter: This filter provides 1 to 5 stops of light reduction, ideal for partly cloudy to bright scenes. Rotate the outer ring to adjust the ND level.
  • ND32-ND512 Filter: This filter offers 5 to 9 stops of light reduction, suitable for very bright to extremely bright scenes. Rotate the outer ring to adjust the ND level.
Variable ND2-32 filter showing 1-5 stops light reduction
Variable ND2-32 filter for 1-5 stops light reduction, suitable for partly cloudy and bright scenes.
Variable ND32-512 filter showing 5-9 stops light reduction
Variable ND32-512 filter for 5-9 stops light reduction, suitable for bright and extremely bright scenes.

Benefits of Using ND Filters:

  • Light Reduction: Prevents overexposure in bright conditions, allowing for proper shutter speed control.
  • Motion Blur: Enables slower shutter speeds to create cinematic motion blur in videos and smooth water effects in photos.
  • Enhanced Color and Contrast: Reduces glare and reflections, leading to richer colors and improved contrast in your images and videos.
Comparison of image quality without filter vs. with ND32 & PL filter, showing enhanced color and contrast
Example of enhanced color and contrast with an ND filter.
Image showing ND64 (6 stops) and ND128 (7 stops) light reduction for extreme sun
ND64 (6 Stops Light Reduction) and ND128 (7 Stops Light Reduction) recommended for extreme sun days.
Image showing ND256 (8 stops) and ND512 (9 stops) light reduction for strong light
ND256 (8 Stops Light Reduction) and ND512 (9 Stops Light Reduction) suitable for strong light.
Image showing ND2 (1 stop) light reduction for cloudy days
ND2 (1 Stop Light Reduction) recommended for a cloudy day.

Demonstration Video:

Video demonstrating quick installation/removal, light reduction, and color enhancement with K&F CONCEPT filters for DJI Mini 3 Pro.

Care and Maintenance

To ensure the longevity and optimal performance of your K&F CONCEPT drone filters, follow these care instructions:

  • Cleaning: The filters feature 28 layers of nanometer coating, making them waterproof, scratch-resistant, mold-resistant, and oil-resistant. For cleaning, use a soft, clean microfiber cloth specifically designed for optical lenses. Breathe lightly on the lens surface to create a slight mist, then gently wipe in a circular motion from the center outwards. Avoid using harsh chemicals or abrasive materials.
  • Storage: Store the filters in their protective case when not in use to prevent dust accumulation and accidental damage. Keep them in a cool, dry place away from direct sunlight and extreme temperatures.
  • Handling: Always handle filters by their edges to avoid leaving fingerprints on the glass surface.
Image detailing 28 layers nanometer coated, waterproof & dust-proof, anti-glaring design, and 1.1g weight
Key features of the filter construction, including multi-coating and lightweight design.

Troubleshooting

If you encounter any issues with your K&F CONCEPT drone filters, please refer to the following common solutions:

  • Filter not fitting correctly: Ensure you are using the correct filter for your DJI Mini 3 Pro model. Double-check the alignment during installation and apply gentle pressure while rotating to lock it in place. Do not force the filter.
  • Image quality issues (e.g., vignetting, color cast): Ensure the filter is clean and free from smudges or dust. For variable ND filters, avoid using them at their absolute maximum density settings, as this can sometimes introduce a slight 'X' pattern or color shift, especially with wider lenses. Adjust the ND level slightly to mitigate this.
  • Gimbal error messages: While designed to be lightweight, ensure the filter is correctly installed and not causing any imbalance. If errors persist, remove the filter and test the drone's gimbal without it to isolate the issue.

Specifications

FeatureDetail
BrandK&F CONCEPT
Filter TypeVariable Neutral Density (VND) Filter
Compatible Drone BrandDJI (Mini 3 Pro)
Available ModelsND2-ND32 (1-5 stops), ND32-ND512 (5-9 stops)
MaterialHigh-quality AGC Optical Glass
Coating28 Layers Nanometer Coated (Waterproof, Scratch-resistant, Mold-resistant, Oil-resistant)
WeightApprox. 1.1g per filter
DesignQuick Release, Anti-Glaring

User Tips

  • When shooting video, aim for a shutter speed that is roughly double your frame rate (e.g., 1/60s for 30fps) to achieve natural-looking motion blur. ND filters are essential for maintaining this rule in bright conditions.
  • Always check your drone's camera settings after installing a filter to ensure proper exposure and white balance.
  • For variable ND filters, rotate slowly and observe the live view on your drone's controller to find the optimal density without introducing unwanted artifacts.

Frequently Asked Questions (FAQ)

Q: How is this item supposed to be used?
A: These filters are designed to be attached to the camera lens of your DJI Mini 3 Pro drone. They reduce the amount of light entering the camera, allowing for more creative control over exposure settings in various lighting conditions, similar to camera coating applications.
Q: Are these ND filters polarized?
A: These specific filters are primarily Variable Neutral Density (VND) filters, which reduce light uniformly. While some K&F CONCEPT filters may combine ND with CPL (Circular Polarizer) functionality, these models are focused on light reduction. Please check the product packaging or specific model name for combined ND/PL filters if polarization is required.

Statement of Compliance

⚠️ For recreation use only. Illegal modification of drones/planes is prohibited. Please also pay attention to the relevant laws and regulations on the use of drones/planes in your country/area to ensure legal use.

Warranty and Support

K&F CONCEPT products are manufactured to high-quality standards. For any warranty claims, technical support, or product inquiries, please contact the seller or K&F CONCEPT customer service directly. Keep your proof of purchase for warranty validation.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.