Aramox BSC3048

Contents

Intelligent Solar Charge Controller BSC3048 User Manual

1. Introduction

The Aramox BSC3048 Intelligent Solar Charge Controller is designed to manage power flow from solar panels to various battery types, ensuring efficient and safe charging. This controller features intelligent recognition for battery voltage and supports parameter customization for different battery chemistries. It is suitable for 12V, 24V, 36V, and 48V systems.

Key Features:

  • Versatile Battery Compatibility: Default support for sealed valve-regulated lead-acid batteries, also compatible with gel, liquid lead-acid, lithium iron phosphate, and ternary lithium batteries.
  • Customizable Parameters: Allows for parameter customization to suit various battery types. Refer to the manual for specific battery type configuration.
  • Wide Voltage Adaptability: Automatically recognizes and adapts to 12V, 24V, 36V, and 48V battery systems.
  • Intelligent Control: Features intelligent recognition, eliminating the need for manual adjustment for truly smart control.
  • Durable Construction: Made from high-quality engineering plastic for strength and a long service life.

2. Installation and Wiring

Proper installation is crucial for the safe and efficient operation of your solar charge controller. Please follow the wiring sequence carefully.

Wiring Sequence:

  1. Connect the battery first.
  2. Reconnect the load.
  3. Finally, connect the solar panel.

Important Notes:

  • This series is a common positive controller. The positive poles of solar panels, batteries, and loads can be grounded simultaneously.
  • If an inverter or other load with a large starting inrush current is connected to the system, connect it directly to the battery, not to the load end of the controller.
  • Reverse the order of wiring when disconnecting (Solar Panel > Load > Battery).
Wiring diagram for the solar charge controller showing connections for solar panel, battery, DC load, and AC load via an inverter.
Figure 1: Solar Charge Controller Wiring Diagram

3. Operating Instructions

The controller features a user-friendly interface with various modes for monitoring and setting parameters.

Solar charge controller display showing 14.4V and a table of operating modes.
Figure 2: Controller Display and Mode Table

Mode Descriptions and Operations:

ModeOperating
Browse modeShort press "+" or "-" to navigate through display screens.
Load switchWhen the load is set to 24-hour mode, short press "+" on the main interface to switch the load. Do not switch the load manually in other load working modes.
Set modeIn the settable interface, long press "+" to enter the parameter setting. Short press "+" or "-" to adjust the parameter. Finally, long press "+" to confirm and save the parameter setting. (Long press "-" to not save the parameters and restore to the last parameter setting).
ResetLong press "+" in the ambient temperature interface to reset.

4. Maintenance

To ensure optimal performance and longevity of your solar charge controller, regular checks are recommended:

  • Periodically inspect all wiring connections for tightness and corrosion.
  • Ensure the controller is kept in a dry, well-ventilated area, free from dust and direct sunlight.
  • Clean the exterior of the controller with a dry cloth as needed. Do not use liquids or abrasive cleaners.
  • Monitor the display for any error codes or unusual readings.

5. Troubleshooting

This section provides general guidance for common issues. For more complex problems, please consult a qualified technician.

Common Issues:

  • No Power/Display: Check battery connections and ensure the battery has sufficient charge. Verify solar panel connection if applicable.
  • Battery Not Charging: Ensure solar panels are receiving adequate sunlight and are correctly connected. Check for any blown fuses in the system. Verify battery type settings are correct.
  • Load Not Working: Check load connections and ensure the load switch is enabled (if in 24-hour mode). Verify battery voltage is above the low voltage disconnect threshold.
  • Overcharging/Undercharging: Confirm that the correct battery type and charging parameters are set in the controller.

If issues persist after basic troubleshooting, refer to the detailed user manual provided with the product or contact customer support.

6. Specifications

ParameterValue
Item TypeSolar Controller
MaterialEngineering Plastic
Rated Current30A
Rated Operating Voltage12V/24V/36V/48V (Auto-sensing)
Solar Panel Input Voltage≤ 100V
Static Loss≤ 30mA
Loop Pressure Drop≤ 0.3V
USB Output5V/2A x 2
Working Temperature-20 ~ +55 ℃
Protection LevelIP32
Relative Humidity≤ 95%, non-condensing
Terminal6AWG/16mm²

7. Warranty and Support

This product is covered by standard consumer protection policies. For specific warranty details, please refer to the purchase agreement or contact the seller directly. General return and refund policies typically allow for returns within a specified period if the item is not as described or faulty upon arrival.

Customer Support:

For technical assistance, troubleshooting beyond this manual, or warranty claims, please contact the seller or manufacturer through the platform where the product was purchased. Ensure you have your order number and product model (BSC3048) ready for faster service.

8. Additional Information

Product Variations:

Please note that new and old models of this product may be shipped randomly. While core functionality remains the same, minor aesthetic differences may exist between the versions. An example of these variations is shown below:

Comparison image showing two versions of the solar charge controller, labeled 'New Type' and 'Old Type'.
Figure 3: New and Old Model Variations
Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.