1. Introduction
This manual provides comprehensive instructions for the installation, configuration, operation, and maintenance of the HORACO ZX-SWTG3448S 52 Port L3 Managed Ethernet Switch. This device is designed for installers and system administrators responsible for network setup and management. It offers advanced features for efficient and secure network operations.
2. Safety Information
Please read and understand all safety precautions before installing or operating the switch. Improper operation may lead to data loss or equipment damage.
- Ensure the power input matches the device specifications (AC 100-240V/50-60Hz).
- Install the device in a well-ventilated area to prevent overheating.
- Avoid exposing the device to extreme temperatures or humidity.
- Ensure proper grounding to prevent electrical hazards.
- The device features lightning protection for network ports and power supply.
3. Package Contents
Verify that all items are present in the package:
- 1 x Switch unit
- 1 x Manual (copy)
- 1 x Power cord
- 1 x Serial port line
- 1 x Pair of lugs (for rack mounting, may need to be purchased separately)
- 1 x Certificate
4. Product Overview
4.1 Key Features
- 52 Ports: 48 x 10/100/1000Mbps RJ45 Ports, 4 x 10G SFP+ Ports, 1 x RJ45 Console Port, 1 x USB Port.
- L3 Management: Supports IPV4/IPV6, static routing (IPv4/IPv6), RIP V1/V2, OSPF.
- Advanced Functions: DHCP, VLAN, MAC Address, ACL, QoS, Multicast, Storm Control, Ethernet Ring, STP/RSTP/MSTP.
- Security: 802.1X Authentication, ARP Intrusion Detection, IP Source Guard, DoS Protection.
- Management: Web, Telnet, CLI, SSH.
- High Performance: 176Gbps Switch Capacity, 131Mpps Packet Buffer Memory, Ruiyu smart chip.
- Robust Design: Lightning protection for network and power ports, suitable for complex environments.
4.2 Front Panel Layout
The front panel of the switch includes all network ports, console port, USB port, and indicator lights.
- 48 x 10/100/1000Mbps RJ45 Ports: For standard Ethernet connections.
- 4 x 10 Gigabit SFP+ Optical Ports: For high-speed fiber optic uplinks.
- 1 x RJ45 Console Port: For command-line interface (CLI) management.
- 1 x USB Interface: For configuration backup/restore or firmware updates.
- Indicator Lights: Provide status information for power, system, and link/activity for each port.
- Reset Switch: Used to reset the device.
4.3 Rear Panel Layout
The rear panel primarily houses the power input and grounding hole.
- Power Interface: AC 100-240V/50-60Hz input.
- Grounding Hole: For connecting a grounding wire.
4.4 Dimensions
The physical dimensions of the switch are approximately 440mm (Length) x 280mm (Width) x 44mm (Height).
5. Setup
5.1 Physical Installation
The switch can be installed on a desktop or rack-mounted. For rack installation, ensure you have the appropriate lugs (may be sold separately).
5.2 Power Connection
Connect the power cord to the AC input on the rear panel and plug it into a compatible power outlet. Ensure the power input is AC 100-240V/50-60Hz. Use the appropriate power plug for your region.
5.3 Network Connection
Connect your network devices (computers, servers, other switches) to the RJ45 Gigabit Ethernet ports. For high-speed uplinks or connections to other fiber-enabled devices, use the 10G SFP+ optical ports with compatible SFP+ modules and fiber optic cables.
5.4 Web Page Login
To access the network management client via a web browser:
- Ensure your PC's IP address is in the same network segment as the switch (e.g., 192.168.2.x). The switch's default IP address is
http://192.168.2.1. - Open a web browser (Chrome 23.0+, Firefox 20.0+, or IE 9.0+).
- Type
http://192.168.2.1into the address bar and press "Enter". - A login window will appear. Enter the default username "admin" and password "admin".
- Click "Log in" to access the switch system.
Caution: Keep your PC's IP network segment consistent with the switch but differentiate the IP address for the first login (1 < x ≤ 254).
6. Operating Instructions
The web management interface provides various menu items for configuring and monitoring the switch. The navigation bar typically includes Status, Network, Port, VLAN, MAC Address Table, Spanning Tree, Discovery, DHCP, Multicast, Routing, Security, ACL, QoS, Diagnostics, and Management.
6.1 Status Monitoring
- System Information: Displays port state, product info, device running logs, and operation logs.
- Statistics: Shows detailed port statistics, faults, and bandwidth utilization.
- MAC Address Table: Displays the current device's MAC address table.
6.2 Network Configuration
- IP Address: Configure and view the management IP address.
- DNS: Configure and view DNS settings, including DNS Server and dynamic host mapping table.
- System Time: Configure system time, time source (SNTP, PC, manual), and daylight saving settings.
6.3 Port Management
- Port Setting: Configure individual port settings (speed, duplex, flow control).
- Error Disabled: Enable or disable port error disable protection.
- Link Aggregation (LAG): Bundle multiple physical interfaces into a single logical interface for increased bandwidth and reliability. Supports Manual Mode and LACP Mode.
- EEE (Energy Efficient Ethernet): Configure power saving for ports.
- Jumbo Frame: Set the Maximum Transmission Unit (MTU) for ports.
- Port Security: Prevent unauthorized devices from accessing the network by limiting MAC addresses per port.
- Protected Port: Isolate ports to prevent broadcast, multicast, and unicast messages from flooding.
- Storm Control: Suppress broadcast, unknown multicast, and unicast messages to prevent network storms.
- Mirroring: Copy traffic from a source port to a destination port for network monitoring and troubleshooting.
6.4 VLAN Configuration
VLANs logically divide a physical LAN into multiple broadcast domains, enhancing network efficiency and security.
- VLAN: Create, configure, and manage VLANs, including membership and port settings.
- Voice VLAN: Prioritize voice data traffic for improved quality.
- Protocol VLAN: Distribute VLAN IDs based on protocol types.
- MAC VLAN: Assign VLANs based on MAC addresses.
- Surveillance VLAN: Prioritize video stream packets.
- GVRP (GARP VLAN Registration Protocol): Dynamically register and manage VLANs on trunk ports.
6.5 MAC Address Table Management
- Dynamic Address: View and configure aging time for dynamically learned MAC addresses.
- Static Address: Manually configure static MAC address entries.
- Filtering Address: Configure the switch to discard matched data frames.
- Port Security Address: Secure MAC addresses on ports.
6.6 Spanning Tree Protocol
Configure Spanning Tree Protocol (STP, RSTP, MSTP) to prevent network loops and provide link redundancy.
- Property: Configure global STP parameters (mode, priority, hello time, max age, forward delay).
- Port Setting: Configure STP attributes for individual ports.
- MST Instance: Manage Multiple Spanning Tree Instances.
6.7 Network Discovery
- LLDP (Link Layer Discovery Protocol): Discover network devices and their information.
- MED Network Policy: Configure LLDP-MED policies for network devices.
6.8 DHCP Services
Configure DHCP services for dynamic IP address allocation.
- Property: Global and static binding configuration for DHCP.
- IP Pool Setting: Configure DHCP IP address pools.
- VLAN IF Address Group Setting: Configure server groups for VLAN interfaces.
- Client List: View DHCP client information.
- Client Static Binding Table: Configure static IP address assignments for clients.
6.9 Multicast Management
Manage multicast traffic efficiently within the network.
- General: Configure general multicast properties (unknown multicast action, forward method).
- Group Address: Add and manage static multicast group addresses.
- Router Port: Configure and view multicast router ports.
- IGMP Snooping: Manage and control IPv4 multicast groups on L2 devices.
- MLD Snooping: Manage and control IPv6 multicast groups on L2 devices.
- MVR (Multicast VLAN Registration): Optimize multicast traffic across VLANs.
6.10 Routing Configuration
Configure Layer 3 routing functionalities.
- IPv4 Management and Interfaces: Configure IPv4 interfaces, routes, and ARP.
- IPv6 Management and Interfaces: Configure IPv6 interfaces, addresses, routes, and neighbors.
- RIP Routes Management: Configure and view RIP (Routing Information Protocol) routes.
- OSPF Routes Management: Configure and view OSPF (Open Shortest Path First) routes.
6.11 Security Features
Implement various security features to protect your network.
- RADIUS/TACACS+: Configure external authentication servers.
- AAA (Authentication, Authorization, Accounting): Manage user authentication methods.
- Management Access: Configure management VLAN and services (Telnet, SSH, HTTP, HTTPS, SNMP).
- Authentication Manager: Global settings for 802.1x/MAC/WEB authentication.
- DoS (Denial of Service): Enable DoS attack resistance.
- Dynamic ARP Inspection: Prevent ARP spoofing attacks.
- DHCP Snooping: Ensure users obtain IP addresses from legal DHCP servers and prevent wrong IP addresses.
- IP Source Guard: Prevent IP address spoofing attacks.
6.12 ACL (Access Control List)
Filter packets based on defined rules to control network traffic.
- MAC ACL: Filter packets based on MAC addresses.
- IPv4 ACL: Filter packets based on IPv4 addresses and protocols.
- IPv6 ACL: Filter packets based on IPv6 addresses and protocols.
- ACL Binding: Bind ACLs to specific interfaces.
6.13 QoS (Quality of Service)
Prioritize network traffic to ensure optimal performance for critical applications.
- General: Global and port scheduling configuration.
- Queue Scheduling: Configure queue scheduling methods (Strict Priority, WRR).
- CoS Mapping: Map Class of Service (CoS) values to queues.
- DSCP Mapping: Map Differentiated Services Code Point (DSCP) values to queues.
- IP Precedence Mapping: Map IP Precedence values to queues.
- Rate Limit: Restrict ingress/egress traffic rates on ports.
- Egress Queue: Configure rate limiting for egress queues.
7. Maintenance
7.1 Firmware Management
- Upgrade: Update the switch firmware via TFTP or HTTP. The switch supports dual images, allowing a standby image to be activated after an upgrade.
- Active Image: Activate and view standby firmware.
7.2 Configuration Management
- Configuration Upgrade/Backup: Backup or upgrade system configuration files.
- Save Configuration: Save the running configuration to startup configuration or restore to factory default.
7.3 Logging
Configure log settings, including log switch, info integration, aging time, and severity level. Logs can be uploaded to a TFTP server.
7.4 Diagnostics
- Ping: Check network connectivity and latency to specified IP addresses or hostnames.
- Traceroute: Trace the path of packets to a destination and measure transmission duration.
- Copper Test: Evaluate the state of copper cables and locate faults.
- Fiber Module: View optical module DDM (Digital Diagnostic Monitoring) information.
- UDLD (Unidirectional Link Detection): Monitor physical link configuration to detect one-way links and prevent loopbacks.
8. Troubleshooting
- Cannot access Web GUI:
- Ensure your PC's IP address is in the same subnet as the switch (default 192.168.2.x).
- Verify the physical network connection to the switch.
- Check if the switch is powered on and system indicators are normal.
- Try resetting the switch to factory defaults if the default login credentials (admin/admin) do not work.
- Network performance issues:
- Check port statistics for errors or high utilization.
- Verify VLAN configurations to ensure traffic is routed correctly.
- Review QoS settings to ensure critical traffic is prioritized.
- Check for network loops using Spanning Tree Protocol status.
- Connectivity problems:
- Use Ping and Traceroute diagnostics to identify network path issues.
- Check cable integrity using the Copper Test or Fiber Module diagnostics.
- Verify port settings (speed, duplex) match connected devices.
9. Specifications
Detailed technical specifications for the HORACO ZX-SWTG3448S switch:
| Attribute | Value |
|---|---|
| Brand Name | HORACO |
| Model Number | ZX-SWTG3448S |
| Switch Type | Ethernet |
| Number of Interfaces | 44 (48 RJ45 + 4 SFP+) |
| Port Configuration | 48 * 10/100/1000Mbps RJ45 Port, 4 * 10G SFP + Port, 1 * RJ45 Console Port, 1 * USB Port |
| Transmission Rate | 10000 Mbps (10 Gigabit Uplink) |
| Switch Capacity | 176Gbps |
| Bandwidth | 176Gbps |
| Packet Buffer Memory | 131Mpps |
| DDR SDRAM | 512MB |
| Flash Memory | 32MB |
| Package cache | 16Mbit |
| MAC Address Table Size | 32K |
| Jumbo frame | 12Kbytes |
| VLANs Supported | 4096 |
| Communication Mode | Full-Duplex & Half-Duplex |
| Function | QoS, SNMP, VLAN Support, 3-Layer Network Management, DHCP/VLAN/MAC Address/ACL/QOS/Multicast/Storm Control, Ethernet Ring/STP/RSTP/MSTP, 802.1X Authentication, ARP Intrusion Detection, IP Source Guard, DoS Protection |
| Internet Protocol | Supports IPV4/IPV6 |
| Layer 3 Interface | Support Layer 3 interface, IPv4, IPv6 address configuration, ARP configuration, ND configuration |
| Layer 3 Routing | Support IPv4 static routing, IPv6 static routing, RIP V1/V2, OSPF |
| Management Methods | Web/Telnet/CLI/SSH |
| Working Temperature | -10℃ - 50℃ |
| Power Input | AC 100-240V/50-60Hz |
| MTBF (Mean Time Between Failures) | 100,000 hours |
| Certification | CE, FCC, RoHS |
| Origin | Mainland China |
10. User Tips
- Link Aggregation (LAG): Yes, this switch is capable of Link Aggregation (LAG) to bundle multiple physical interfaces for increased bandwidth and redundancy. You can configure LAG groups and LACP settings via the web management interface under "Port > Link Aggregation".
- Firmware Updates: The switch comes with pre-installed firmware. Future updates can typically be obtained from the manufacturer's official support channels. Firmware updates are performed via the web management interface under "Management > Firmware > Upgrade".
11. Warranty and Support
The HORACO ZX-SWTG3448S switch comes with a 2-year warranty. For technical support, troubleshooting assistance, or warranty claims, please contact HORACO Official Store customer service.
A detailed user manual in PDF format is available for download, providing in-depth information on all features and configurations: HORACO ZX-SWTG3448S Web Manual (PDF).