PHYEE FIATISOWC

Contents

PHYEE CAN Bus Wiring Harness Instruction Manual

Model: FIATISOWC | Brand: PHYEE

1. Introduction

This manual provides detailed instructions for the installation and operation of the PHYEE CAN Bus Wiring Harness. This adapter is designed to seamlessly integrate an aftermarket Android car radio with a 16-pin socket into compatible Fiat and Lancia vehicles, utilizing the vehicle's existing ISO connector and CAN Bus system for essential functions.

PHYEE CAN Bus Wiring Harness components

Figure 1: Overview of the PHYEE CAN Bus Wiring Harness and Decoder.

2. Specifications

FeatureDescription
Model NameFIATISOWC
Item TypeCables, Adapters & Sockets
MaterialCopper
Voltage12 V
Item Weight0.12 kg
Item SizeCAN Bus Wiring Harness
Connectors16 Pin Plug, ISO Connector, CAN Bus Decoder

3. Vehicle Compatibility

This wiring harness is designed for specific Fiat and Lancia models equipped with an ISO cable and for use with Android car radios featuring a 16-pin socket. Please verify your vehicle's original wiring harness plug matches the adapter's socket before purchase.

Compatible Car Models:

  • Fiat 500 (2007-2013)
  • Fiat Panda (2nd gen, 169) (2003-2011)
  • Fiat Doblo (2009-2015)
  • Fiat Uno (2010-2014)
  • Fiat Bravo (2007-2016)
  • Fiat Punto (2005-2018)
  • Fiat Palio (326) (2011-2017)
  • Lancia Delta (2008-2014)
  • Lancia Ypsilon (2004-2012)

Important Note: Due to regional differences, the above compatibility list is for reference only. Always confirm that your car's original wiring harness plug physically matches the adapter's socket before proceeding with installation.

4. Package Contents

  • 1 x 16-pin to ISO Harness Adapter
  • 1 x CAN Bus Decoder
  • 1 x FAKRA Male Car Antenna Cable (Optional, depending on selected variant)

5. Installation Setup

Before beginning installation, ensure your vehicle's ignition is off and the battery is disconnected to prevent electrical damage.

5.1 Component Identification

PHYEE Radio Harness Adapter with CAN Bus Decoder

Figure 2: Main components of the harness adapter and CAN Bus decoder.

CAN Bus Decoder and Connector Details

Figure 3: Close-up of the CAN Bus decoder, 8-pin connector, and 16-pin connector.

5.2 Wiring Diagram

Refer to the detailed wiring diagram below for correct connections. Each wire is color-coded and labeled for specific functions.

Detailed Wiring Diagram for 16-Pin Connector

Figure 4: Wiring diagram for the 16-pin connector, showing speaker, power, and control lines.

Key Wiring Connections:

  • Speaker Wires: White (Front Left +), White/Black (Front Left -), Gray (Front Right +), Gray/Black (Front Right -), Green (Rear Left +), Green/Black (Rear Left -), Purple (Rear Right +), Purple/Black (Rear Right -)
  • Power Wires: Black (GND - Ground), Yellow (BATTERY - Constant Power Supply +12V), Red (ACC - Ignition Switch)
  • Control Wires: Orange (ILLUMINATION - Illuminate Backlight), Pink (REVERSE - Reversing Camera Control Line), Blue (ANT - Auto Antenna Power)

5.3 Connection Steps

  1. Connect the 16-pin plug: Connect the 16-pin male plug of the harness adapter to the 16-pin socket on your Android car radio. Ensure a secure fit.
  2. 16-Pin Socket on Android head unit

    Figure 5: Example of a 16-pin socket on an Android head unit.

  3. Connect the ISO connector: Plug the ISO female connector of the harness into your vehicle's original ISO wiring harness.
  4. ISO Connector and 16-Pin Plug

    Figure 6: ISO connector for vehicle integration.

  5. Connect the CAN Bus Decoder: Connect the CAN Bus decoder to the designated connector on the wiring harness.
  6. CAN Bus decoder for Fiat car with ISO connector

    Figure 7: CAN Bus decoder for Fiat vehicles with ISO connector.

  7. Optional Antenna Connection: If included, connect the FAKRA male car antenna cable to your car radio and vehicle antenna.
  8. Secure all connections: Ensure all plugs are firmly seated to prevent intermittent issues.

Video 1: Product overview and connection demonstration.

Harness connected to an Android head unit

Figure 8: The harness connected to an Android head unit, ready for installation into the dashboard.

6. Operating Instructions (CAN Bus Settings)

After physical installation, you will need to configure the CAN Bus decoder within your Android car radio's system settings. This step is crucial for proper communication between the car and the new head unit, enabling functions like steering wheel controls, door status, and ignition signals.

  1. Enter Android System Factory Settings: Access the factory settings part of your Android car radio system. This usually requires a specific password (refer to your Android radio's manual).
  2. Choose CAN Bus Decoder Type: Navigate to the CAN Bus settings and select the appropriate CAN Bus decoder type. The decoder included is typically 'Hiworld'.
  3. Choose Car Brand: Select 'Fiat' from the list of car brands.
  4. Choose Car Model and Year: Select your specific car model and year (e.g., Fiat 500, 2007-2013) from the available options.
CAN Bus Setting Operation in Android System

Figure 9: Screenshot illustrating the CAN Bus setting operation within an Android car radio system.

7. Maintenance

The PHYEE CAN Bus Wiring Harness is designed for durability and requires minimal maintenance. Ensure all connections remain secure and free from moisture or physical damage. Periodically check for any loose wires or corrosion, especially if you experience intermittent electrical issues.

8. Troubleshooting

  • No Power to Radio: Double-check all power connections (Yellow, Red, Black wires) and ensure they are correctly connected to constant 12V, ignition 12V, and ground respectively. Verify vehicle fuses.
  • No Sound: Confirm all speaker wires are correctly connected according to the wiring diagram (Figure 4). Check the Android radio's audio settings.
  • Steering Wheel Controls Not Working: Ensure the CAN Bus decoder is correctly connected and configured in the Android radio's factory settings (Section 6). Verify the car brand, model, and year selection.
  • Reversing Camera Not Activating: Check the Pink 'REVERSE' wire connection. Ensure the camera is properly installed and powered.
  • Product Not Working (General): If the product does not function as expected, first re-verify all physical connections and software settings. Ensure the car model and year match the harness adapter's compatibility.

9. User Tips

  • Verify Compatibility Carefully: Always physically compare your car's original wiring harness plug with the adapter's socket before purchasing and installing. Regional variations can affect compatibility.
  • Copper for Performance: The harness is made of copper, which ensures good electrical conductivity and performance.
  • Professional Installation Recommended: If you are unsure about any steps, consider seeking professional assistance for installation to avoid damage to your vehicle or the product.

10. Warranty and Support

This product comes with a standard manufacturer's warranty. For specific warranty details, please refer to your purchase documentation or contact the seller directly. For technical support or assistance with installation, please reach out to PHYEE customer service or your product retailer.


Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.