1. Product Overview
The KJR-02B Receiving Board is designed for Midea central air-conditioning duct machines and multi-line indoor duct machines. It functions as a receiver for remote control signals, allowing for convenient operation of your air conditioning unit. This manual provides instructions for its installation, operation, and maintenance.

2. Package Contents
Ensure all items are present before proceeding with installation:
- KJR-02B Receiver Board with frame and double female plug
- 10-core male-to-female connection cable
- Remote Control Unit (may vary in appearance)


3. Setup and Installation
The KJR-02B receiver board is designed for integration with Midea central air conditioning duct machines. Installation should ideally be performed by a qualified technician.
3.1 Connecting the Receiver Board
- Locate the appropriate connection port on your central air conditioning unit's main board. This port is typically designed for a 10-core connection.
- Connect the provided 10-core male-to-female cable (as shown in Figure 3 and Figure 4) to the main board.
- Connect the other end of the 10-core cable to the KJR-02B receiver board. Ensure the double female plug is securely seated.
- Mount the receiver board in a suitable location within the air conditioning unit, ensuring it is protected from moisture and physical damage.


4. Operating Instructions
The KJR-02B receiver board allows control via a compatible remote control unit or its integrated manual button.
4.1 Using the Remote Control
Point the remote control towards the receiver board. The remote control provides comprehensive functions for your air conditioning unit.


Common Remote Control Functions:
- On/Off (开/关): Powers the unit on or off.
- Mode (模式): Cycles through operating modes (Auto, Cool, Dehumidify, Heat).
- Set Temperature (设定温度): Adjusts the desired temperature.
- Fan Speed (风速): Controls the fan speed (High, Medium, Low).
- Timer (定时): Sets a timer for operation.
- Swing (摆风): Activates or deactivates the air swing function.
- Economy (经济): Engages energy-saving mode.
- Fresh Air (清新): Activates fresh air intake (if supported by AC unit).
- Humidify (加湿): Activates humidification (if supported by AC unit).
- Electric Auxiliary Heat (电辅热): Engages electric heating assistance (if supported by AC unit).
- Reset Lock (复位 锁定): Resets settings or locks the remote.
- Cancel (取消): Cancels current settings.
4.2 Manual Operation (Receiver Board)
The receiver board features a 'Manual' button for basic control and indicator lights for status feedback.
- Manual Button (手动): Press this button to cycle through basic operating modes or to turn the unit on/off in case the remote control is unavailable.
- Run Indicator (运行): Illuminates when the air conditioning unit is operating.
- Timer Indicator (定时): Illuminates when a timer function is active.
- Anti-cold/Fan Indicator (防冷/送风): Illuminates during anti-cold operation or when only the fan is running.
- Alarm Indicator (报警): Illuminates to indicate an error or fault condition. Refer to the main AC unit's manual for alarm codes.
5. Maintenance
To ensure optimal performance and longevity of your KJR-02B Receiving Board:
- Cleaning: Keep the receiver board and remote control clean and free from dust. Use a soft, dry cloth for cleaning. Do not use liquid cleaners directly on the components.
- Battery Replacement (Remote Control): Replace remote control batteries when the display becomes dim or the remote range decreases. Ensure correct polarity when inserting new batteries.
- Environmental Conditions: Avoid exposing the receiver board to extreme temperatures, high humidity, or direct sunlight.
- Professional Inspection: Periodically have your central air conditioning system, including the receiver board, inspected by a qualified technician.
6. Troubleshooting
If you encounter issues with your KJR-02B Receiving Board, consider the following:
- No Response from Remote Control:
- Check remote control batteries and replace if necessary.
- Ensure there are no obstructions between the remote control and the receiver board.
- Verify the remote control is pointed directly at the receiver.
- Unit Not Responding (even with manual button):
- Check the power supply to the air conditioning unit.
- Inspect the 10-core connection cable for any loose connections or damage.
- If the 'Alarm' indicator light is on, consult your main air conditioning unit's manual for specific error codes and troubleshooting steps.
- Intermittent Operation:
- Ensure all connections are secure.
- Check for potential sources of interference (e.g., other electronic devices).
If problems persist, contact a qualified HVAC technician for assistance.
7. Specifications
| Feature | Description |
|---|---|
| Model | KJR-02B / MBQ4-02B |
| Compatibility | Midea Central Air Conditioning Duct Machines, Multi-line Indoor Duct Machines |
| Connection Type | 10-core wired connection |
| Control Interface | Infrared Remote Control, Manual Button |
| Indicator Lights | Run, Timer, Anti-cold/Fan, Alarm |
| Origin | Mainland China |
8. User Tips
No specific user tips or frequently asked questions were available for this product.
9. Warranty and Support
For warranty information and technical support, please refer to the documentation provided with your Midea central air conditioning unit or contact your authorized Midea service provider. Ensure that installation and repairs are carried out by certified professionals to maintain warranty validity and ensure safe operation.