Lufi XS Gauge

Contents

LUFI XS Gauge OBD+GPS Head-Up Display User Manual

Model: XS Gauge

1. Introduction

The LUFI XS Gauge is a versatile multi-functional meter designed for vehicles, offering both OBD and GPS dual-mode functionality. It provides real-time monitoring of various vehicle parameters, including engine data, performance metrics, and navigational information. This device aims to make driving safer and more informed by displaying critical data directly in the driver's line of sight.

LUFI XS Gauge displaying RPM, oil temperature, voltage, G-meter, and run time on a car dashboard.

LUFI XS Gauge displaying various vehicle parameters.

2. Key Features

The LUFI XS Gauge offers a range of powerful features to enhance your driving experience:

  • OBD+GPS Dual Mode Dual System: Combines On-Board Diagnostics (OBD) and Global Positioning System (GPS) for comprehensive data acquisition and enhanced safety.
  • Satellite Positioning: Utilizes GPS+Beidou dual-mode chip for accurate altitude, location coordinates, direction, and time.
  • Vehicle ECU Driving Data: Accesses and displays a wide array of data directly from your vehicle's Engine Control Unit (ECU).
  • Gyroscope Function: Monitors pitch and roll angles in real-time, providing alerts if they exceed preset values to ensure driving safety.
  • G Value Acceleration: Quantifies the sense of pushing back during acceleration and deceleration, useful for performance analysis.
  • Powerful Alarm Function: Customizable alarm values for speed, RPM, water temperature, oil pressure, and more.
  • Multiple Display Interfaces: Seven major display interfaces that can be switched at will, offering various data layouts.
  • User Data Customization: Allows customization of up to 9 instrument data points.
  • Performance Tests: Features for testing 0-100km/h, 0-200km/h, 0-400m, 0-60MPH, 0-100MPH, and 1/4 mile acceleration.
  • Car Logo Change: Option to change the displayed car logo.
Infographic showing six core advantages: OBD+Beidou Dual mode, Satellite positioning, Vehicle ECU Driving data, Gyroscope data, G value acceleration, and Alarm.

Six core advantages of the LUFI XS Gauge.

3. Specifications

3.1. General

  • Origin: Mainland China
  • Placement on Vehicle: On the center console
  • High-concerned chemical: None

3.2. Dimensions & Weight

  • Item Length: 15mm
  • Item Width: 13mm
  • Item Height: 9mm
  • Item Weight: 0.4 kg
  • Host Size: 100 x 13 x 82 mm
  • Support Size: 52 x 42 x 50 mm

3.3. Electrical Parameters

  • Working Voltage: DC9-18V
  • Working Current: <100mA
  • Sleep Current: <15mA
  • Working Temperature: -20°C to 60°C

3.4. Hardware

  • Display: 3.5 inch true color LCD display
  • Resolution: 480 x 320 pixels
  • Control: 5 physical keys
  • Sensors: Ambient light sensor, Gyroscope, Acceleration sensor
  • Connectivity: GPS & Beidou Positioning
  • Alerts: Alarm buzzer

4. Vehicle Compatibility

The LUFI XS Gauge is compatible with most vehicles equipped with an OBD2 system.

  • 12V pure fuel vehicles produced after 2008 can be installed.
  • Honda, Toyota, Volkswagen, Mazda, and other cars produced after 2003 can be installed.
  • Note: Many Suzuki models may not be compatible.

The device supports a wide range of data sources for various car brands:

Image showing car brand logos and the types of data supported by the LUFI XS Gauge for each, including Honda, Volkswagen, Audi, Linker/Volvo, Ford, Alfa Romeo, Toyota, Subaru, Nissan, GM/Buick/Chevrolet, and Mazda.

Supported vehicle brands and data types.

5. Product Installation

Follow these steps to install your LUFI XS Gauge:

  1. Find the OBD Diagnostic Interface: Locate the OBD diagnostic interface in your car. OBD interfaces are typically 16-hole trapezoidal interfaces. Common locations include:
    • Area A: BMW, Audi, Volkswagen, Toyota, General Motors, Hyundai, and most other models.
    • Area B: Toyota, Volkswagen Touran, Lexus, etc.
    • Area C: Dongfeng Citroen, Dongfeng Logo, and other small number of vehicles.
    • Area D: Dongfeng Citroen and a few other models.
    • Area E/F: A small number of models such as Wuling Automobile.

    Most OBD interfaces are in areas A and B. A 1.8m long communication cable is equipped as standard. Before ordering, please confirm whether the position and function of the OBD port are normal. If you can't find it, you can inquire Baidu or consult customer service.

  2. Connect the OBD Power Cord: Connect the OBD power cord of the LUFI XS Gauge to the car's OBD interface.
  3. Select the Appropriate System: Select the appropriate system via "System Settings -> System Selection" and select the vehicle model. If your model is not supported by the instrument data, only the special data protocol, door status display, etc., will be shown.
  4. Determine if the Instrument is Installed on the Stalled Vehicle or Can Be Closed with IT: You can skip this step if the installation of the ON power detection line is enabled. If not, please enter the menu "Other settings -> Shutdown without speed fluctuation" to turn on the speed fluctuation shutdown function. This will allow the instrument to wake up when the vehicle starts and sleep when it turns off. If the vehicle has no start-stop function or has been turned off, you can skip the installation of the ON power detection line to complete the installation.
  5. Installation of the ON Power Detection Line (if applicable): After turning on the "speed fluctuation free shutdown" function, you will need to install the instrument to ensure the vehicle starts and sleeps correctly.

The instrument and on-board instrument should start and shut down synchronously. After starting the vehicle, the instrument cannot be started automatically for a long time. New energy vehicles, old vehicles without OBD data, and OBD data function with instrument off only use G value, gyroscope, and GPS function.

Product installation guide showing OBD interface locations in a car interior, different OBD port types, and a diagram for connecting the ignition switch gear.

OBD interface positions and connection diagram.

6. Operation

6.1. Display Interfaces

The LUFI XS Gauge offers 7 major display interfaces that can be switched to suit your preferences. All display interface data can be edited.

Vertical collage of seven different display interfaces available on the LUFI XS Gauge, showing various data layouts like RPM, speed, voltage, temperatures, and G-meter readings.

Examples of the 7 major display interfaces.

6.2. Setting Menus

The device features an exclusive setting menu for customization:

Screenshots of the LUFI XS Gauge setting menus, including Display Setup, System Setup, GPS Setup, and G Meter/Gyro Setup.

Exclusive setting menus for LUFI XS Gauge.

  • Display Setup: Adjust item color, reset peak value, dimmer, display brightness, oil pressure warning limit.
  • System Setup: Configure units (km/h-KPa-C-l/hkm), speed adjust, RPM adjust, TU/IN-MF.P. adjust, volt adjust, PID time loop, water warm up. The OBD function can be turned off, and GPS mode can be used.
  • GPS Setup: View GPS/Beidou satellite positioning data.
  • G Meter/Gyro Setup: Perform zero calibration, set G meter range, clear G peak meter, set absolute pitch warning, and absolute roll warning.

6.3. User Data Customization

You can customize up to 9 instrument data points through the user data customization interface.

Screenshots of the User Data Customization Interface, showing options for Setup Menu, User Data Setting, Data and PID Setting, and CAN Identifier settings.

User Data Customization Interface.

6.4. Gyro Function

The gyro function adopts free rotation to improve sensitivity. Pitch angle and roll angle are monitored in real-time. If they exceed the default value, an alarm will sound to ensure driving safety.

Diagrams illustrating the Gyro Function, showing pitch angle for uphill/downhill and roll angle for tilt left/right, with ranges of -45 to +45 degrees.

Gyro function displaying pitch and roll angles.

6.5. Powerful Alarm Function

The LUFI XS Gauge allows you to preset alarm values for various parameters. If the instrument data exceeds the preset value, the system will provide a reminder or pop-up alarm.

Table showing default, lower limit, upper limit, company, and alarm mode settings for various parameters like speed, RPM, battery voltage, water temperature, oil pressure, and pitch/roll angles.

Alarm value settings table.

6.6. Multiple Performance Tests

The device includes functions for conducting various performance tests:

  • 0-100km/h acceleration test
  • 0-200km/h acceleration test
  • 0-400m drag race test
  • 0-60MPH acceleration test
  • 0-100MPH acceleration test
  • 1/4 mile drag race test
Graph showing performance testing results for speed over time, with best time, speed, and RPM displayed.

Performance testing interface.

6.7. OBD and GPS Systems

The LUFI XS Gauge supports both OBD and GPS systems. By default, both functions can be displayed simultaneously. If the vehicle model does not support the OBD function, only the relevant data from GPS and gyroscope will be displayed.

Screenshots comparing data displayed in GPS System mode (G Meter, Roll, Pitch, Altitude, Volt, Speed Avg, Course, Water T, Speed, Lat, Lon) and OBD System mode (similar data but sourced from OBD).

Comparison of GPS System and OBD System data displays.

6.8. Full Function Data Type List

The device can display more than 50 kinds of data, including but not limited to:

Table listing over 50 full function data types in both Chinese and English, such as Turbo Pressure, Air/Fuel Ratio, Engine RPM, Speed, Water Temperature, Oil Temperature, Voltage, Fuel Consumption, and various sensor readings.

Partial list of supported data types.

7. Maintenance

  • Keep the device clean and free from dust. Use a soft, dry cloth for cleaning.
  • Avoid exposing the device to extreme temperatures or direct sunlight for prolonged periods.
  • Ensure all connections are secure to prevent data loss or malfunction.
  • Do not attempt to disassemble or repair the device yourself, as this may void the warranty.

8. Troubleshooting

8.1. Common Issues and Solutions

  • Device does not power on: Ensure the OBD power cord is securely connected to the car's OBD interface and the vehicle's ignition is on.
  • No data displayed: Check if the OBD function is enabled in the settings. If your vehicle does not support OBD, ensure GPS mode is active. Verify vehicle compatibility.
  • Inaccurate fuel consumption data: Fuel consumption data is calculated based on air flow or turbine/intake pressure data. If your vehicle does not have one of these two parameters, the fuel consumption calculation may be inaccurate. The fuel consumption conversion formula of the vehicle is divided into automobile and diesel; please check the engine type of the vehicle and enter "System Settings -> Fuel Type" to select the corresponding fuel type. The calculation results of fuel consumption may be different, please calibrate properly according to the vehicle conditions.
  • Device does not enter sleep mode: If the device does not enter sleep mode, press any key to wake up the product. If no key is pressed again after waking up, the product will enter sleep again in 1 minute.
  • Fault code displayed when engine is running: Some vehicles cannot clear the fault code when the engine is running.

8.2. G Meter Calibration

After the instrument is placed, it must be calibrated once. To obtain accurate data, enter "G value/gyro calibration -> zero calibration". The placement of the instrument must be parallel to the horizontal coordinates of the vehicle during calibration.

9. User Tips

  • Language Setting: The menu supports English, as shown in the provided interface screenshots.
  • OBD Port Location: If you have trouble finding your OBD port, consult your vehicle's manual or search online forums for your specific car model.
  • Customizing Displays: Take advantage of the 7 major display interfaces and user data customization to tailor the information shown to your driving needs.
  • Alarm Configuration: Set appropriate alarm values for critical parameters like water temperature and oil pressure to receive timely warnings.

10. Warranty and Support

For warranty information, please refer to the terms and conditions provided at the time of purchase. For technical support or further inquiries, please contact the seller or manufacturer directly.

© 2024 Lufi. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.