BAOFENG UV-16 Plus

Contents

Baofeng UV-16 Plus Walkie Talkie Instruction Manual

Model: UV-16 Plus

Introduction

This manual provides detailed instructions for the safe and efficient operation of your Baofeng UV-16 Plus Walkie Talkie. Please read this manual thoroughly before using the device and keep it for future reference.

The Baofeng UV-16 series offers robust communication with features like dual-band VHF/UHF operation, high power output (8W or 10W), IP57 waterproof rating, and convenient Type-C charging.

Package Contents

Upon unpacking, please verify that all items listed below are present and in good condition:

  • 1 x Portable Radio (UV-16 Plus)
  • 1 x Antenna
  • 1 x Li-ion Battery Pack
  • 1 x Belt Clip
  • 1 x Lanyard
  • 1 x USB Charger
  • 1 x User's Manual (PDF available for download here)

Note: Alternative accessories may vary depending on your purchase selection.

Baofeng UV-16 Plus package contents including radio, antenna, battery, desktop charger, belt clip, and lanyard.
Figure 1: Standard Package Contents

Product Overview

The Baofeng UV-16 Plus is a professional handheld two-way radio designed for reliable communication. It features a durable build, intuitive controls, and advanced functionalities.

Labeled diagram of the Baofeng UV-16 Plus radio showing antenna, flashlight, knob, LED indicator, PTT button, LCD display, side key, accessory jack, microphone, Type-C jack, and keypad.
Figure 2: Baofeng UV-16 Plus Components
Video 1: 360-degree view of the Baofeng UV-16 Plus Walkie Talkie.

Setup Instructions

  1. Install the Battery:

    Align the battery pack with the radio's battery compartment. Ensure the contacts are correctly aligned. Insert the battery until it clicks securely into place. Use the fixing screw to further secure the battery if available.

    Close-up of the Baofeng UV-16 Plus battery compartment showing the fixing screw for secure attachment.
    Figure 3: Securing the Battery with Fixing Screw
  2. Attach the Antenna:

    Carefully screw the antenna onto the connector at the top of the radio. Rotate it clockwise until it is firmly attached. Do not hold the top of the antenna while rotating it to attach it.

    Image showing the antenna being screwed onto the top connector of the Baofeng UV-16 Plus radio.
    Figure 4: Attaching the Antenna

    The radio comes with a high-gain 20cm upgraded length antenna with a pure copper coil for improved communication distance and stability.

    Image of the 20cm high gain antenna with pure copper coil, highlighting its upgraded length and flexible design.
    Figure 5: High Gain Antenna
  3. Charge the Radio:

    Connect the USB Type-C charging cable to the radio's Type-C jack. You can charge the radio using a standard USB adaptor, power bank, or laptop. Ensure the device is dry before charging.

    Baofeng UV-16 Plus connected to a Type-C charger, illustrating convenient charging options with adaptor, power bank, and USB.
    Figure 6: Convenient Type-C Charging
  4. Initial Function Test:

    After assembly and charging, turn on the radio and test its basic functions to ensure proper operation of all accessories.

    Note: Do not press the PTT (Push-To-Talk) button to transmit before connecting the antenna to the radio. Transmitting without an antenna can damage the radio.

Operating Instructions

Basic Operation

  • Power On/Off: Rotate the top knob clockwise to turn on and counter-clockwise to turn off.
  • Volume Control: Adjust the top knob to control the volume.
  • PTT Button: Press and hold the PTT button on the side to transmit. Release to receive.
  • Frequency/Channel Switching: Use the dedicated keys (V/M, A/B) and the keypad to switch between frequencies and channels.
  • Close-up of the Baofeng UV-16 Plus keypad and function buttons, highlighting the Frequency/Channel Switching Key, Big Individual FM Key, and PTT Button.
    Figure 7: Keypad and Function Buttons

Advanced Features

  • Dual Watch & Sync Switchable: The radio supports dual watch, allowing you to monitor two channels simultaneously. The Sync function displays both channel name and frequency information for a single monitored channel.
  • UHF VHF Scanner + 3 Scanning Modes:
    • Channel Scanning: Scans through your preset channel list.
    • Frequency Range Scanning: Scans a user-defined frequency range.
    • CTCSS/DCS Tone Scanning: Scans all CTCSS/DCS tones on the current frequency.
  • PC & Manual Programmable: You can program the radio using computer software or directly via the keypad. Keypad programming allows for adding/deleting memory channels, adjusting VOX/squelch/power save levels, and more.
  • FM Radio Function: The radio includes a built-in FM radio (65-108MHz reception) for entertainment. Use the dedicated FM key to access this feature.
  • LED High Power Torch: Equipped with an LED torch that supports constant light and flash modes for night vision and emergencies.
  • Baofeng UV-16 Plus radio with its LED torch illuminated, demonstrating its utility in low-light conditions.
    Figure 8: LED High Power Torch in Use
  • Waterproof Design: The UV-16 Plus features an IP57 life waterproof rating, providing protection against dust and rain.
  • Baofeng UV-16 Plus radio partially submerged in water, illustrating its waterproof capability.
    Figure 9: IP57 Waterproof Feature

Maintenance and Care

  • Cleaning: Use a soft, damp cloth to clean the radio's exterior. Do not use harsh chemicals or solvents.
  • Storage: Store the radio in a cool, dry place away from direct sunlight and extreme temperatures.
  • Battery Care:
    • Charge the battery fully before first use.
    • Avoid overcharging or completely draining the battery.
    • If storing for extended periods, charge the battery to about 50% and recharge every few months.
  • Antenna Care: Handle the antenna carefully. Avoid bending or twisting it excessively.

Troubleshooting

ProblemPossible CauseSolution
Radio does not power on.Low or dead battery; improperly installed battery.Charge the battery; ensure battery is correctly installed and secured.
Cannot transmit or receive.Antenna not connected; incorrect frequency/channel; low battery.Ensure antenna is securely attached; verify frequency/channel settings; charge battery.
Poor audio quality.Weak signal; incorrect squelch level; damaged microphone/speaker.Move to an area with better signal; adjust squelch level; contact support if hardware is damaged.
Difficulty programming channels.Incorrect software or programming method.Refer to the "PC & Manual Programmable" section. Ensure you are using the correct programming software (e.g., CHIRP for Baofeng radios) and cable. If using keypad, follow the quick menu operation mode.

Technical Specifications

General

  • Model Number: UV-16 Plus (also known as UV-16/UV-16 Pro/UV-16 V2 plus/UV16 Max)
  • Brand Name: BAOFENG
  • Walkie Talkie Type: Portable
  • Material: Plastic
  • Dimensions (LxWxH): 115*60*36mm (without antenna)
  • Weight: 450g (approximate)
  • Frequency Range: VHF (136-174Mhz) UHF (400-520Mhz)
  • Storage Channel: 128
  • Maximum Range: 5km-10km
  • Output Power (W): 5W-10W (10W: High/Mid/Low; 8W: High/Low)
  • Waterproof / Water-Resistant: IP57
  • Is_Display: Yes (LCD display)
  • Battery Capacity (mAh): 5800mAh
  • Battery Type: Li-ion battery (7.4V)
  • Battery Included: Yes
  • Charging Mode: USB Charger Dock, Fast Charging USB C
  • Antenna Impedance: 50ohm
  • Antenna Type: SMA-(Male)
  • Headphone Jack Type: 2 Pin Kenwood Plug
  • Mode Of Operation: Simplex Or Semi-duplex
  • Frequency stability: ±2.5ppm
  • Frequency Step: 2.5/5/6.25/10/12.5/20/25KHz
  • Working temperature: -20~+50°C
  • Rated Voltage: 7.4V DC±10%
  • Certification: CE, Dot, EAC, EPA, FCC, GMP, RoHS, TGA, UL, KC, pse, weee
  • Origin: Mainland China

Transmitter

  • Type Of Modulation: 16køF3E / 11køF3E
  • Max frequency deviation: < 5kHz (Wide) / < 2.5kHz (Narrow)
  • Emission current: <= 1.5A (5W)
  • CTCSS / DCS: 0.7±0.1kHz (Wide) / 0.4±0.1kHz (Narrow)

Receiver

  • Sensitivity: -122dBm (12dB SINAD)
  • Audio Power: 1W
  • Intermediation Distortion: <10%
  • Inter modulation: >=65Db / >=60dB
  • Spurious response: 65dB
  • Adjacent channel selectivity (wide/narrow): <-65dB (Wide) <-60dB (Narrow)
  • Receiving Current: <=380mA

User Tips

  • Antenna Upgrades: For potentially better range, consider exploring compatible higher-gain antennas. Ensure any replacement antenna is suitable for the radio's frequency bands.
  • Programming Software: While manual programming is possible, using PC software like CHIRP (a common open-source program for Baofeng radios) can simplify channel management and advanced settings. Ensure you download the correct software version for your specific UV-16 model.
  • Accessory Compatibility: When purchasing accessories like acoustic attachments, verify if they include built-in microphones if that functionality is desired.
  • Power Output Check: You can typically check the current power output (8W or 10W) directly from the radio's keypad menu.

Safety Information and Regulatory Compliance

  • General Safety:
    • WARNING: CHOKING HAZARD - Small parts. Not for Children under 3 years.
    • WARNING: Do not use this product in flammable, explosive, or high-static environments to prevent fire or explosion hazards.
    • WARNING: Ensure the device is dry before use. Do not charge or use the device when it is wet or has been exposed to water, to prevent electric shock or device damage.
    • Keep away from flammable materials.
    • Do not expose the accessories to extreme temperatures (below -10°C or above 40°C).
    • Do not disassemble, modify, or repair this accessory yourself.
    • This product is only compatible with specified models; do not use it with other devices.
  • Regulatory Compliance: This product complies with the following EU regulations and harmonized standards:
    • 2014/53/EU
    • 2011/65/EU
    • EN 62368-1:2020
    • EN 301 489-1 V2.2.3
    • EN 300 328 V2.2.2
  • Disposal: When disposing of the product, please follow local electronic waste recycling regulations.

Warranty and Support

For warranty information, technical support, or service inquiries, please refer to the contact information provided by your retailer or the official Baofeng website. Always provide your product model number (UV-16 Plus) and purchase details when seeking support.


Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.