Sceptre W50 U515CV-UMR

Contents

LED Backlight Strip Instruction Manual

For Sceptre W50 U515CV-UMR and compatible models

1. Product Overview

This product is a replacement LED backlight strip designed for Sceptre W50 U515CV-UMR and similar TV models. It consists of multiple LED bar segments that connect to form the complete backlight for your television display. The modular design facilitates easier handling and installation.

LED backlight strips with a ruler for scale

Image 1: Overview of the LED backlight strips, showing individual segments and approximate dimensions with a ruler.

The panel, lamp beads, lamp caps, and terminals are manufactured to be brand new and original, ensuring quality and compatibility.

2. Setup and Installation

Due to the length of the complete light strip, it is supplied in multiple segments (typically 2 or 3 parts) to prevent damage during transportation. These segments must be connected correctly during installation.

2.1 Connecting the Light Strip Segments

Upon receiving the light strip, you will need to connect the individual segments. Each segment is designed to fit together precisely. Ensure proper alignment before making connections.

Diagram showing three segments of an LED backlight strip with connection points highlighted.

Image 2: Illustration of how the light strip segments connect. Note the distinct 'A', 'B', and 'C' type segments and their connection points.

Follow the sequence indicated on the strips, often marked as A, B, C or 1, 2, 3. Incorrect connection, especially of segment 'B', can lead to damage or burning out of the LEDs.

Close-up of two connected LED backlight strip segments with a yellow circle highlighting the connection point.

Image 3: Detailed view of a connected joint between two LED strip segments, showing the interlocking design.

2.2 Integration into the TV

Once the segments are correctly connected, the assembled light strip is ready for installation into your television. This process typically involves:

  1. Carefully opening the TV panel to access the existing backlight.
  2. Removing the old or damaged backlight strips.
  3. Positioning the new LED backlight strip in the designated area.
  4. Connecting the power cable from the TV's power board to the new LED strip.
  5. Reassembling the TV panel.

It is recommended to consult a professional or a detailed TV repair guide specific to your Sceptre W50 U515CV-UMR model for precise steps on opening and reassembling your television.

3. Operating Instructions

Once installed and connected to the TV's power supply, the LED backlight strip operates automatically with your television. It will illuminate when the TV is powered on and turn off when the TV is powered off. There are no external controls or adjustments for the backlight strip itself.

4. Maintenance

LED backlight strips are generally maintenance-free. However, to ensure longevity and optimal performance:

  • Avoid exposing the strips to excessive moisture or extreme temperatures.
  • When handling, avoid bending or applying excessive force to the strips, as this can damage the LEDs or circuit board.
  • If cleaning is necessary, use a soft, dry cloth. Do not use liquid cleaners directly on the LED strips.

5. Troubleshooting

If the LED backlight strip does not function correctly after installation, consider the following troubleshooting steps:

  • No Illumination: Double-check all connections between the segments and the connection to the TV's power board. Ensure all connectors are firmly seated.
  • Partial Illumination: This often indicates an issue with one of the segments or a faulty connection between segments. Carefully inspect each segment and its connection points.
  • Flickering or Uneven Brightness: Verify that the voltage supplied by the TV's power board is stable and within the specified range (5V DC). Loose connections can also cause flickering.
  • LED Burnout: As warned during setup, incorrect connection of segments (especially 'B' type) can cause LEDs to burn out. Ensure all segments are connected in the correct orientation and sequence.

If issues persist, it may indicate a faulty strip or a problem with the TV's internal components. Professional assistance may be required.

6. Specifications

FeatureValue
Model NumberW50 U515CV-UMR Onn ONA50UB19E05
Item TypeBar Lights
Light SourceLED bulbs
Power SourceDC
Voltage5V
Wattage25W
Length (Total)50 inches (approx. 127 cm)
Width0.5 cm
Luminous Flux<60
Is DimmableNo
Body MaterialAluminum
CertificationCCC
OriginMainland China
Package Weight0.3 kg
Package Length (Max Segment)60 cm

7. Warranty and Support

This product comes with a warranty period of 150 days from the date of purchase. For any quality issues or concerns during this period, please contact the seller for support.

For detailed diagrams and additional technical information, please refer to the official user manual PDF available at User Manual (PDF).

8. User Tips

  • Verify Compatibility: Before purchasing, always confirm that the model number of your TV matches the compatible models listed for this backlight strip.
  • Handle with Care: LED strips are delicate. Avoid touching the LED beads directly and handle the strips by their edges to prevent damage.
  • Correct Segment Connection: Pay close attention to the labels (A, B, C or 1, 2, 3) on each segment and connect them in the correct order and orientation. Incorrect connection, especially of segment 'B', can permanently damage the LEDs.
  • Test Before Final Assembly: After connecting the new LED strips but before fully reassembling the TV, perform a quick test to ensure all LEDs illuminate correctly.

9. Frequently Asked Questions (FAQ)

Q: Why is the light strip supplied in multiple pieces?
A: The light strip is divided into 2 or 3 segments to prevent damage during shipping due to its long length. These segments are designed to be connected together during installation.
Q: Are the components new and original?
A: Yes, the panel, lamp beads, lamp caps, and terminals are all brand new and original, consistent with the product images.
Q: What happens if I connect the segments incorrectly?
A: Incorrect connection, particularly of segment 'B', can cause the LEDs to burn out. Always ensure segments are connected in the correct sequence and orientation.
Q: Is this LED strip dimmable?
A: No, this LED backlight strip is not dimmable and operates at a fixed brightness.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.