ALLiSHOP 5.5x2.1 mm DC Connector

Contents

ALLiSHOP 5.5x2.1mm DC Power Connector User Manual

Model: 5.5x2.1 mm DC Connector

1. Introduction

This manual provides essential information for the safe and effective use of your ALLiSHOP 5.5x2.1 mm DC Power Connectors. Please read this guide thoroughly before installation and operation. For a more detailed reference, a user manual is also available in PDF format.

2. Safety & Warnings

Important Safety Information

  • Read all instructions before use. Failure to follow these instructions may result in damage to the product or personal injury.
  • Keep the device and its cord out of reach of children under 3 years old.
  • Do not expose to water or moisture.

3. Product Overview & Specifications

The ALLiSHOP 5.5x2.1mm DC Power Connectors are versatile adaptors designed for various electrical connections, including computer and CCTV applications. They are available in male-to-male and female-to-female configurations.

Product Specifications

AttributeDetail
Product Name5.5mm*2.1mm DC Power Double Female to Female Plug Connector Male to Male Panel Mounting Jack Adaptor
Model Number5.5x2.1 mm DC Connector
BrandALLiSHOP
MaterialPlastic, Metal
ColorBlack, Silver Tone
Plug Size5.5mm x 2.1mm
TypeDC Connector
Gender OptionsDC Male to Male, DC Female to Female
ApplicationComputer, CCTV, general electrical connections
FeaturesDC Conversion Head, DC Power Jack Plug Adapter, 5.5*2.1MM / 5.5X2.1mm male to male/Female to Female Connector
Batch/Serial Number1005005023265225

Product Variations

1Pcs Male DC Connector
1Pcs Male DC Connector
1Pcs Female DC Connector
1Pcs Female DC Connector
5Pcs Male DC Connectors
5Pcs Male DC Connectors
5Pcs Female DC Connectors
5Pcs Female DC Connectors
Assortment of DC male and female connectors
Assortment of DC male and female connectors
Close-up of one female and one male DC connector
Close-up of one female and one male DC connector
A male and female DC connector connected together
A male and female DC connector connected together
Top-down view of a female and male DC connector
Top-down view of a female and male DC connector

4. Setup & Installation

  1. Before First Use: Carefully inspect the connector(s) to ensure they are in good physical condition and free from any visible damage.
  2. Connection: These connectors are designed for soldering. Ensure you have the necessary tools and expertise for soldering electrical components.
  3. Polarity: Always verify the correct polarity of your DC power source and the device you are connecting to prevent damage.
  4. Secure Connection: After soldering, ensure all connections are secure and insulated if necessary to prevent short circuits.

5. Operation

Once properly installed, the DC power connectors facilitate the transfer of power between compatible devices. Ensure the male and female ends are fully engaged for a stable connection.

6. Maintenance

  • After each use, keep the connectors dry and clean.
  • Store in a cool, dry place away from direct sunlight and moisture.
  • Avoid subjecting the connectors to excessive force or bending, which could damage the internal components.

7. Troubleshooting

  • No Power: If your device is not receiving power, first check that the DC connector is securely plugged into both the power source and the device. Verify the power source is active and functioning correctly.
  • Loose Connection: If the connection feels loose, ensure the male and female parts are fully inserted. If soldering was involved, inspect the solder joints for any breaks or cold solder points.
  • Intermittent Power: This often indicates a loose connection or a faulty cable/connector. Wiggle the connection gently to see if power is restored. If so, re-solder or replace the connector.

8. User Tips

  • Always verify the correct polarity (positive and negative) before making connections to avoid damaging your devices.
  • When soldering, use a suitable soldering iron and lead-free solder. Ensure a strong, clean joint for optimal conductivity and durability.
  • Double-check that the 5.5mm x 2.1mm size matches the power input/output requirements of your equipment to ensure compatibility.
  • Consider using heat shrink tubing over soldered connections for added insulation and strain relief.

9. Compliance Information

This product holds a CE Certificate Of Compliance, indicating it meets the health, safety, and environmental protection standards for products sold within the European Economic Area (EEA).

10. Manufacturer Information

Manufacturer: Shenzhen Luozhuo Technology Co., Ltd

Address: CN-Floor 5, No.32 Zhongxing Road, Liguang Village, shiyan Baoan District, Shenzhen, Guangdong

EU Authorized Representative: APEX CE SPECIALISTS LIMITED

Address: UNIT 3D NORTH HOUSE, NORTH POINT BUSINESS PARK, NEW MALLOW ROAD

11. Warranty & Support

This product is manufactured to high-quality standards and is designed for reliable performance when used as directed. For product support or any inquiries, please contact the manufacturer directly using the information provided in this manual.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.