GL.iNet MT3000

Contents

GL.iNet GL-MT3000 (Beryl AX) Wi-Fi 6 Wireless Travel Gigabit Router User Manual

Your guide to secure and fast internet connectivity on the go.

1. Introduction

The GL.iNet Beryl AX (GL-MT3000) is an AX3000 pocket-sized Wi-Fi 6 travel router. It features a MT7981B 1.3GHz dual-core processor, offering enhanced Wi-Fi speeds and robust performance for demanding network usage. Its compact design makes it ideal for both home and travel environments, providing secure and versatile internet access.

GL.iNet Beryl AX (GL-MT3000) Wi-Fi 6 Wireless Travel Gigabit Router

Figure 1: GL.iNet Beryl AX (GL-MT3000) Router Overview

2. Hardware Overview

2.1 Package Contents

Upon unboxing your GL-MT3000, you should find the following items:

  • Beryl AX (GL-MT3000) Router
  • User Manual
  • Thank You Card
  • Ethernet Cable
  • Power Adapter (5V/3A)
  • Converters (based on your shipping country)
  • Warranty Card
Package contents of GL.iNet Beryl AX (GL-MT3000) including router, manual, power adapter, and cables.

Figure 2: Package Contents

2.2 Router Ports and Buttons

Familiarize yourself with the ports and buttons on your Beryl AX router:

  • Power Port: Type-C, 5V/3A input.
  • 2.5G WAN Port: Multi-Gigabit Ethernet port for internet connection.
  • LAN Port: Gigabit Ethernet port for local network devices.
  • USB 3.0 Port: For connecting USB devices like modems or storage.
  • Reset Button: Used for resetting the router to factory defaults or other functions.
  • Toggle Button: Customizable button for various functions.
  • Light Indicator: Solid white light indicates the router is working correctly.
  • Retractable Antennas: Can be adjusted 180 degrees for optimal signal.
Rear view of GL.iNet Beryl AX (GL-MT3000) showing power, WAN, LAN, and USB 3.0 ports.

Figure 3: Rear Ports of Beryl AX

Side view of GL.iNet Beryl AX (GL-MT3000) showing reset and toggle buttons.

Figure 4: Side Buttons of Beryl AX

3. Setup Instructions

3.1 Initial Setup Video Guide

For a visual guide on unboxing and setup, please refer to the official video:

Video 1: GL.iNet Beryl AX (GL-MT3000) Unboxing and Setup Guide

3.2 Powering On the Router

  1. Connect one end of the power adapter to the router's Type-C power port.
  2. Plug the other end of the power adapter into an electrical outlet. The router will automatically power on.

3.3 Connecting to the Router

You can connect to the router via an Ethernet cable or Wi-Fi.

3.3.1 Connect via Ethernet

Connect your computer to the LAN port of the router using an Ethernet cable.

3.3.2 Connect via Wi-Fi

  1. Locate the SSID (Wi-Fi name) on the bottom label of your router. It will be in the format GL-MT3000-XXX or GL-MT3000-XXX-5G.
  2. Find the default Wi-Fi password (Key) on the same label.
  3. On your computer, phone, or tablet, search for the router's SSID and input the Wi-Fi password to connect. If the password is not found on the label, try the default password: goodlife.
Bottom label of GL.iNet Beryl AX (GL-MT3000) showing SSID and default Wi-Fi password.

Figure 5: Router Bottom Label with SSID and Key

Note:

  • The QR code on the bottom label contains Wi-Fi connection information for quick connection via a smartphone.
  • You cannot access the internet immediately after connecting to Wi-Fi. You must set up the admin password first.

3.4 Accessing the Web Admin Panel

  1. Open a web browser (Chrome, Edge, or Safari recommended).
  2. Navigate to http://192.168.8.1. This will direct you to the initial setup page.
  3. Choose your preferred language and click Next.
GL.iNet Admin Panel language selection screen.

Figure 6: Admin Panel Language Selection

3.5 Setting Up Admin Password

  1. Set a strong admin password for your router.
  2. Confirm the password.
  3. Click Submit to continue.

Note:

  • The Wi-Fi may temporarily disconnect during this step. Reconnect to the router if necessary.
  • Password requirements: 5-63 characters, including letters (case-sensitive), numbers, and symbols. Must contain at least two of uppercase letters, lowercase letters, numbers, and symbols.

4. Operating Instructions

After initial setup, you will enter the web Admin Panel. This section covers various operating modes and features.

4.1 Internet Connection Methods

The Beryl AX (GL-MT3000) supports multiple ways to connect to the internet:

  • Ethernet: Connect the WAN port to a modem or another router.
  • Repeater: Connect to an existing Wi-Fi network.
  • Tethering: Share internet from a smartphone via USB.
  • Cellular: Connect via a 3G/4G USB modem.
Admin Panel Internet page showing connection methods: Ethernet, Repeater, Tethering, Cellular.

Figure 7: Internet Connection Methods in Admin Panel

4.1.1 Connect via Ethernet

Connect the router's WAN port to your modem or another router's LAN port using an Ethernet cable. The router supports DHCP, Static IP, and PPPoE protocols. You can configure these settings in the INTERNET > Ethernet section of the Admin Panel.

4.1.2 Connect via Repeater

This mode allows the router to connect to an existing wireless network (e.g., hotel Wi-Fi) and create its own subnet for security. In the INTERNET > Repeater section, click Connect, select your desired Wi-Fi network, enter the password, and click Apply. The LED light will turn white upon successful connection.

4.1.3 Connect via USB Tethering

You can share your smartphone's internet connection with the router via a USB cable.

  1. Connect your smartphone to the router's USB 3.0 port.
  2. On your smartphone, enable Personal Hotspot (for iPhone) or USB Tethering (for Android).
  3. In the router's Admin Panel, navigate to INTERNET > Tethering and click Connect.
GL.iNet Beryl AX (GL-MT3000) connected to a USB modem for tethering.

Figure 8: Router with USB Modem

Note:

  • Some mobile carriers may limit or charge for tethering. Check with your provider.
  • If the connection fails, try toggling the tethering option on your phone a few times.

4.1.4 Connect via Cellular (USB Modem)

The router can use a 3G/4G USB modem for internet access.

  1. Turn off the router. Insert your SIM card into the USB modem, then plug the USB modem into the router's USB 3.0 port. Power on the router.
  2. In the Admin Panel, go to INTERNET > Cellular. Click Auto Setup.

Note:

  • Some SIM cards may require activation in a phone first.
  • If auto-setup fails, try Manual Setup and configure APN settings.
  • Some SIM cards have usage restrictions or require specific APN settings. Consult your network operator.

4.2 Wireless Settings

Manage your main and guest Wi-Fi networks in the WIRELESS section.

4.2.1 Main Wi-Fi

Configure SSID, security (WPA2-PSK recommended), password, visibility, mode (802.11a/b/g/n/ac/ax), bandwidth, and channel for both 2.4GHz and 5GHz bands.

4.2.2 Guest Wi-Fi

Create separate guest networks for 2.4GHz and 5GHz with their own SSIDs and passwords. This provides isolated access for guests.

4.3 Client Management

In the CLIENTS section, you can manage connected devices.

  • Blocking Client: Enable Block WAN to prevent a client from accessing the internet while still allowing local network access.
  • Limiting Speed: Set upload and download speed limits for individual clients.
  • Remove Offline Clients: Remove disconnected devices from the client list.

4.4 Firewall Settings

The router includes firewall features for network security.

  • Port Forwards: Allow remote computers to connect to local devices behind the firewall.
  • Open Ports on Router: Open specific ports for router services (e.g., web, FTP) to be publicly reachable.
  • DMZ (Demilitarized Zone): Expose one computer to the internet, redirecting all inbound packets to it. Use with caution.

4.5 VPN (Virtual Private Network)

GL.iNet routers come pre-installed with OpenVPN and WireGuard, supporting over 30 VPN providers for secure and encrypted network traffic.

GL.iNet Beryl AX (GL-MT3000) showing VPN speed comparison for WireGuard and OpenVPN.

Figure 9: VPN Speed Comparison

4.5.1 VPN Dashboard

Access the VPN > VPN Dashboard section to manage VPN client and server settings.

4.5.2 VPN Client

Connect to a VPN service provider. You can set up OpenVPN or WireGuard clients. The router supports a global proxy mode where all traffic goes through VPN, or policy mode based on target domain/IP, client device, or VLAN.

4.5.3 VPN Server

Set up the router as an OpenVPN or WireGuard server to access your home network remotely.

4.5.4 VPN Cascading

This feature allows the router to act as both a VPN server and client simultaneously, routing traffic from devices connected to the VPN server through a VPN client tunnel.

Diagram illustrating VPN Cascading on GL.iNet Router with VPN 1 and VPN 2 connections.

Figure 10: VPN Cascading Diagram

4.6 Tor (The Onion Router)

Tor provides anonymous communication. Enable it in APPLICATIONS > Tor. Note that this feature is in beta and may affect other functions like VPN, DNS, IPv6, and AdGuard Home.

4.7 Dynamic DNS (DDNS)

Map a domain name to your router's dynamic IP address for remote access. Configure in APPLICATIONS > Dynamic DNS.

4.8 Remote Access (HTTP, HTTPS, SSH)

Enable remote access to your Admin Panel via HTTP, HTTPS, or SSH in APPLICATIONS > Dynamic DNS. HTTPS uses self-signed certificates, which may trigger browser warnings.

4.9 GL.iNet GoodCloud

GoodCloud is a cloud management service for remotely accessing and managing your routers. Access it in APPLICATIONS > GoodCloud.

4.10 Network Storage

The router supports connecting USB flash drives and portable external hard drives. You can set up Samba, WebDAV, and DLNA for network sharing in APPLICATIONS > Network Storage. Supported disk formats include NTFS, exFAT, FAT32, Ext3, Ext4.

5. Maintenance

5.1 Firmware Upgrade

Keep your router updated for optimal performance and security. Navigate to UPGRADE in the Admin Panel.

  • Online Upgrade: The router checks for the latest firmware version if connected to the internet.
  • Local Upgrade: Upload a firmware file from your computer. Do not disconnect power during the upgrade.

5.2 Toggle Button Settings

Customize the function of the physical toggle button on the router in MORE SETTINGS > Toggle Button Settings. Options include No Function, AdGuard Home (On/Off), OpenVPN Client (On/Off), and WireGuard Client (On/Off).

5.3 Reset Firmware

In case of malfunction, you can reset the router to its factory defaults in MORE SETTINGS > Reset Firmware. This will erase all settings, applications, and data. The process takes about 3 minutes; do not power off the router during this time.

6. Troubleshooting

6.1 Internet Connection Issues

  • Repeater Mode: If the router fails to connect to a network, ensure the correct SSID and password are entered. If the upstream router changes its SSID/password or restricts connection, the repeater may fail.
  • Tethering/Cellular: Verify your mobile carrier allows tethering and check for specific APN settings if using a cellular modem.

6.2 VPN Connection Issues

If your VPN connection fails:

  • Ensure your Internet Service Provider (ISP) assigns you a public IP address.
  • Check if port forwarding is needed and configured correctly.
  • Verify that the port used for the VPN server is not blocked by your ISP.
  • Some countries/regions may block VPN connections.

6.3 Dynamic DNS (DDNS) Issues

If DDNS is not working, check if your router is behind NAT or if you have a public IP address. Port forwarding may be required in your ISP router.

6.4 Tor Functionality

Tor is in beta. When enabled, features like VPN, DNS, IPv6, and AdGuard Home may not work properly.

6.5 Admin Panel Access

If you cannot access the web Admin Panel, try pressing and holding the reset button for 4 seconds to revert to Router mode.

7. Specifications

AttributeValue
Brand NameGL.iNet
ModelMT3000 (Beryl AX)
CPUMT7981B Dual-core Processor @1.3GHz
Memory / StorageDDR4 512MB / NAND Flash 256MB
Wi-Fi Transmission Standard802.11ac, 802.11ax
Wi-Fi Supported Frequency2.4G & 5G (Dual-Band)
Wi-Fi Speed (2.4GHz)574Mbps
Wi-Fi Speed (5GHz)2402Mbps
Wired Transfer Rate10/100/1000Mbps
WAN Port1 x 10/100/1000/2500Mbps
LAN Port1 x 10/100/1000 Mbps
Number of USB Interfaces1 x USB 3.0
Antennas2 x undetachable external Wi-Fi antennas (retractable)
Power InputType-C, 5V/3A
Power Consumption<8W
Working Temperature0 ~ 40°C (32 ~ 104°F)
Storage Temperature-20 ~ 70°C (-4 ~ 158°F)
Dimension / Weight106 x 83 x 33mm / 196g
FunctionFirewall, QoS, VPN
ApplicationMulti-service, Business
Supports WDSYes
Supports WPSNo
Support MeshNot Supported

8. Warranty and Support

Your GL.iNet GL-MT3000 (Beryl AX) router comes with a warranty card included in the package. Please refer to the card for specific warranty terms and conditions.

For detailed instructions and further technical information, you can refer to the comprehensive user manual PDF available from the manufacturer. This manual covers advanced configurations and troubleshooting steps not fully detailed here.

If you encounter any problems during OpenVPN setup, you can contact GL.iNet support at support@glinet.biz or refer to their online forum for assistance.

9. User Tips

  • The router is noted for its quiet operation.
  • It offers native OpenWrt support, allowing advanced users extensive customization beyond the default GL.iNet firmware.
  • Many users find it excellent for travel, especially when used in tethering mode with WireGuard VPN, as it allows creating a private LAN network anywhere without reconfiguring all your devices.
  • Updating to the latest firmware is recommended for easier setup of VPN outgoing tunnels and overall improved functionality.
  • The Beryl AX is praised for its balance of features and price, offering great value.
  • It comes preconfigured with drivers for USB modems and VPNs, simplifying initial setup for these features.
  • The Wi-Fi performance is strong, capable of covering a 2-room apartment and providing good outdoor distribution.
  • For Tailscale network integration, some users have successfully updated the router via a terminal using community scripts.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.