1. Introduction
Thank you for choosing the HITBOX 5 Pin TIG Welding Foot Pedal. This accessory is designed to provide precise and hands-free current control for your TIG welding and plasma cutting operations. It enhances efficiency and allows the operator to maintain focus on the work. This manual provides essential information for the safe and effective use of your foot pedal.
2. Safety Information
Please read and understand all safety instructions before operating the foot pedal. Failure to do so may result in injury or equipment damage.
- Always ensure the welding machine is turned off and disconnected from the power source before connecting or disconnecting the foot pedal.
- Do not use the foot pedal if the cable or connector is damaged.
- Keep the foot pedal clean and free from debris, especially around the moving parts and electrical connections.
- Ensure the foot pedal is placed on a stable, level surface during operation to prevent accidental movement.
- This foot pedal is designed for use with compatible HITBOX welding machines. Do not attempt to use it with incompatible equipment.
- Wear appropriate personal protective equipment (PPE) when welding or cutting.
3. Package Contents
The package includes the following items:
- 1 x HITBOX 5 Pin TIG Welding Foot Pedal (with 3-meter wire)
4. Specifications
| Feature | Specification |
|---|---|
| Model | Foot Pedal |
| Use | TIG Welding, Plasma Cutting |
| Connector Pin | 5 Pins |
| Adjustable Current Range | 0-200 Amps |
| Wire Length | 3 meters (118.11 inches / 300 cm) |
| Power Source | DC |
| Resistance Value | 1000 Ω (1K) |
| Dimensions (Pedal Body) | Approx. 9.05 in (23 cm) L x 5.71 in (14.5 cm) W x 3.74 in (9.5 cm) H |
| Weight | 1.34 kg |
| Certification | CE |
| Compatible Models | HITBOX HBT250P AC/DC, HITBOX CT520 |


5. Setup and Connection
Follow these steps to connect the foot pedal to your welding machine:
- Ensure your welding machine is powered off and unplugged from the main power supply.
- Locate the 5-pin control port on your compatible HITBOX welding machine (e.g., HBT250P AC/DC or CT520).
- Align the 5-pin connector of the foot pedal cable with the port on the welding machine.
- Gently push the connector into the port and twist to secure it, if applicable.
- Place the foot pedal on a stable, flat surface where you can comfortably operate it during welding.
- Once connected, you can power on your welding machine.



6. Operation
The foot pedal allows for precise current control during welding or cutting operations, freeing your hands for better torch manipulation.
- Set Maximum Current: Use the adjustable knob on the side of the foot pedal to set the desired maximum current (0-200 Amps). This knob acts as a limiter for the current range controlled by the pedal.
- Initiate Arc/Cut: Press down on the foot pedal to initiate the welding arc or cutting process.
- Control Current: Vary the pressure on the foot pedal to adjust the current output from your welding machine. Pressing further down increases the current up to the maximum set by the knob, while easing off reduces it.
- Release Pedal: Release the foot pedal to stop the welding arc or cutting process.


7. Maintenance
To ensure the longevity and reliable performance of your foot pedal, follow these simple maintenance guidelines:
- Cleaning: Regularly wipe down the exterior of the foot pedal with a dry, clean cloth to remove dust and debris. Avoid using harsh chemicals or solvents.
- Cable Inspection: Periodically inspect the cable and connector for any signs of wear, cuts, or damage. Replace if necessary.
- Storage: Store the foot pedal in a dry, clean environment when not in use. Avoid extreme temperatures and humidity.
- Moving Parts: Ensure the pedal mechanism moves freely without obstruction. Do not force the pedal if it feels stiff.
8. Troubleshooting
If you encounter issues with your foot pedal, refer to the following common problems and solutions:
- No Current Response:
- Check if the 5-pin connector is securely attached to the welding machine.
- Ensure the welding machine is powered on and set to the correct mode for foot pedal operation.
- Verify that the current adjustment knob on the foot pedal is not set to zero. - Inconsistent Current Control:
- Inspect the foot pedal mechanism for any physical obstructions or damage.
- Check the cable for any signs of internal damage or loose connections. - Pedal feels stiff or sticky:
- Clean any debris that might be lodged in the pedal mechanism.
- Do not apply lubricants unless specifically recommended by the manufacturer, as this could attract more dust.
If the problem persists after attempting these solutions, please contact customer support.
9. User Tips
- Current Control: The foot pedal controls the current within the range set by the external knob. For example, if the knob is set to 100 Amps, the pedal will allow you to vary the current from 0 to 100 Amps. This provides fine-tuned control during welding.
- Practice: Take some time to practice with the foot pedal to get a feel for its responsiveness and how to achieve desired current levels smoothly.
10. Warranty and Support
The HITBOX 5 Pin TIG Welding Foot Pedal comes with a One Year Warranty from the date of purchase, covering manufacturing defects. Please retain your proof of purchase for warranty claims.
For additional guides and documents, including a detailed user manual in PDF format, please refer to the official resources. A PDF user manual is available at: User manual (PDF).
If you have any questions, require technical assistance, or need to make a warranty claim, please contact HITBOX customer support through your retailer or the official HITBOX website.
