NHKUPOR Fiat 500 9-inch Multimedia Frame Kit

Contents

Instruction Manual

9 Inch Android Car Multimedia Player Frame Kit for Fiat 500 (2007-2015)

Brand: NHKUPOR | Model: Fiat 500 9-inch Multimedia Frame Kit

1. Product Overview

This multimedia player frame kit is designed to seamlessly integrate a 9-inch Android car multimedia head unit into the dashboard of Fiat 500 models manufactured between 2007 and 2015. It serves as a fascia or bezel, filling the gap between the original car's dashboard opening and the new head unit, ensuring a factory-like appearance. The kit is constructed from high-quality ABS plastic for durability and a precise fit.

Gray multimedia player frame kit installed in a Fiat 500 dashboard
Gray frame kit with before and after installation views in a Fiat 500.
Black multimedia player frame kit installed in a Fiat 500 dashboard
Black frame kit with before and after installation views in a Fiat 500.

2. Setup and Installation

Installation of this frame kit requires basic automotive electrical and trim removal tools. It is recommended that installation be performed by a qualified professional to ensure proper fitment and electrical connections. Always disconnect the vehicle's battery before beginning any electrical work.

2.1 Components Included (may vary by variant):

  • 9-inch Multimedia Player Frame (Black or Gray)
  • Wiring Harness (with or without CANbus, depending on selection)

2.2 General Installation Steps:

  1. Prepare Vehicle: Ensure the vehicle is turned off and the battery is disconnected.
  2. Remove Original Head Unit: Carefully remove the existing car radio and any surrounding trim panels to access the dashboard opening. Refer to your vehicle's service manual for specific instructions on trim removal.
  3. Connect Wiring Harness: Connect the provided wiring harness to the vehicle's existing wiring and to the new 9-inch Android head unit. If your vehicle requires a CANbus decoder, ensure the appropriate harness variant is used and connected correctly.
  4. Mount Head Unit: Secure the 9-inch Android head unit into the new frame kit.
  5. Install Frame Kit: Position the assembled head unit and frame kit into the dashboard opening. Ensure all clips and mounting points align correctly.
  6. Secure and Reassemble: Secure the frame kit and head unit in place. Reinstall any removed trim panels.
  7. Reconnect Battery: Reconnect the vehicle's battery and test the functionality of the new head unit.
Black wiring harness with CANbus module
Example of a black wiring harness with CANbus.
Gray wiring harness with CANbus module
Example of a gray wiring harness with CANbus.

3. Operating Instructions

This product is a frame kit designed to house a 9-inch Android car multimedia player. The operation of the multimedia player itself is dependent on the specific head unit installed. Please refer to the instruction manual provided with your 9-inch Android head unit for detailed operating instructions.

4. Maintenance

The frame kit is made from durable ABS plastic and requires minimal maintenance.

  • Cleaning: Use a soft, damp cloth to wipe down the frame. Avoid abrasive cleaners or solvents, as these can damage the plastic finish.
  • Inspection: Periodically check for any loose connections or signs of wear, especially if the vehicle experiences significant vibrations.

5. Troubleshooting

Most issues related to the multimedia system will stem from the head unit itself or its electrical connections. This frame kit is a passive component.

  • Poor Fitment: If the frame does not fit correctly, double-check that it is the correct model for your Fiat 500 (2007-2015) and that all original mounting points are clear. Ensure no cables are obstructing the frame's seating.
  • Head Unit Not Powering On: Verify all electrical connections, especially the main power and ground wires, and any CANbus connections if applicable. Check the vehicle's fuses.
  • Steering Wheel Controls Not Working: This typically indicates an issue with the CANbus connection or the head unit's configuration for steering wheel controls. Consult the head unit's manual and ensure the CANbus module (if included) is correctly wired.

6. Specifications

FeatureSpecification
CompatibilityFiat 500 (Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015)
MaterialHigh Quality ABS Plastic
Inner Size (for Head Unit)9 inch (approximately 230x220x130mm)
StandardDouble 2 DIN
Item Weight0.36 kg
Item Height13 cm
Item Width22 cm
Item Length23 cm
External Testing CertificationCE
Special FeaturesFills the gap between original car and head unit

7. User Tips

  • Durability: The ABS plastic construction is known for its strength and longevity, ensuring the frame will withstand typical automotive conditions.
  • Professional Installation: For optimal results and to avoid potential damage to your vehicle or the product, professional installation is highly recommended, especially when dealing with complex wiring or CANbus systems.

8. Warranty and Support

For any questions regarding the product, installation, or potential issues, please contact the seller or manufacturer directly. Specific warranty details, if any, are typically provided at the point of purchase or by the seller.

© 2023 NHKUPOR. All rights reserved.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.