1. Introduction
This manual provides essential information for the safe and effective use of your new Mitsubishi Air Conditioner Remote Control. This remote is designed as a functional replacement for various Mitsubishi AC models, including MSZ-HJ35VA-PK1, MP14A, MS16B, MSZ-HE09NA, MSZ-HE12NA, and MSZ-HE15NA. Please read this manual thoroughly before operating the remote control.
Important Note: This remote control is for single cooling functionality only and operates in Celsius. It does not support heating functions or Fahrenheit temperature display.
2. Safety Information
- Do not expose the remote control to direct sunlight, high temperatures, or moisture.
- Avoid dropping or subjecting the remote control to strong impacts.
- Keep batteries out of reach of children. If swallowed, seek medical attention immediately.
- Dispose of used batteries according to local regulations. Do not incinerate batteries.
3. Package Contents
- 1 x Mitsubishi Air Conditioner Remote Control (Batteries not included)
4. Specifications
| Feature | Specification |
|---|---|
| Support APP | No |
| Frequency | 433 MHz |
| Channel | 1 |
| Wireless Communication | IR (Infrared) |
| Use | Air Conditioner, Universal |
| Origin | Mainland China |
| Certification | None |
| Color | White |
| Battery Type | AA*2 (Not included) |
| Condition | New |
5. Setup
5.1 Battery Installation
- Turn the remote control over to access the battery compartment on the back.
- Gently slide the battery cover downwards or press the latch and slide to open it.
- Insert two (2) AA batteries, ensuring the positive (+) and negative (-) terminals align correctly with the markings inside the compartment.
- Slide the battery cover back into place until it clicks securely.
5.2 Initial Use
Once batteries are installed, the remote control is ready for use. No programming is typically required as it is a functional replacement designed to work with compatible Mitsubishi AC units directly.
6. Operating Instructions
Point the remote control directly at the indoor unit of your air conditioner. Ensure there are no obstructions between the remote and the AC unit.
6.1 Basic Functions
- ON/OFF: Press to turn the air conditioner on or off.
- MODE: Cycles through available operating modes (e.g., Cool, Dry, Fan). Note: This remote primarily supports cooling.
- FAN: Adjusts the fan speed (e.g., Auto, Low, Medium, High).
- TEMP ▲/▼: Increases or decreases the set temperature. Temperature is displayed in Celsius only.
- VANE: Adjusts the direction of the airflow (swing function).
- TIMER: Sets the on/off timer for the air conditioner. Refer to your AC unit's manual for detailed timer settings.
- RESET: Resets the remote control settings.
7. Maintenance
- Clean the remote control regularly with a soft, dry cloth. Do not use liquid cleaners or abrasive materials.
- If the remote control will not be used for an extended period, remove the batteries to prevent leakage and damage.
8. Troubleshooting
- Remote control not responding:
- Check if the batteries are inserted correctly and have sufficient charge. Replace if necessary.
- Ensure there are no obstructions between the remote control and the air conditioner's receiver.
- Make sure you are within the effective operating range of the air conditioner.
- Certain functions not working:
- This remote is a functional replacement. While compatible, slight button layout differences or specific advanced functions might vary from your original remote.
- Confirm that the function you are trying to use (e.g., heating) is supported by this specific remote model (it only supports cooling).
9. User Tips
- Remember that this remote is designed for cooling operations only and displays temperature in Celsius. It cannot be switched to Fahrenheit or activate heating modes.
- If you require a remote with heating functionality, please verify compatibility with the seller before purchase.
- While the remote is broadly compatible, minor variations in button layout may occur between production batches. The core functions remain consistent.
10. Warranty and Support
This product comes with a 3-month warranty from the date of purchase. This warranty covers manufacturing defects under normal use.
For any issues, questions, or support regarding your remote control, please contact the seller directly. Provide your order details and a clear description of the problem for prompt assistance.
