TELESIN OA-WTP-003

Contents

TELESIN 45M Waterproof Case User Manual

Model: OA-WTP-003

Compatible with DJI Osmo Action 3, Action 4, and Action 5 Pro Cameras

1. Introduction

The TELESIN 45M Waterproof Case is designed to provide robust protection for your DJI Osmo Action 3, Action 4, or Action 5 Pro camera during underwater activities. Constructed from high-transparent PC material and featuring 316 marine-grade stainless steel keys, this housing ensures clear visuals and reliable operation up to a depth of 45 meters. Its design focuses on preventing water seepage and maintaining high-quality image capture in challenging aquatic environments.

TELESIN Waterproof Case for DJI Action 3/4/5 Pro, front view
The TELESIN Waterproof Case, designed for DJI Osmo Action cameras.

2. Package Contents

Please verify that all items are present and in good condition upon opening the package:

  • 1 x TELESIN Waterproof Case
  • 3 x Anti-fog Sheets
  • 1 x User Manual
  • 1 x Screw Rod
Diagram showing the waterproof case, anti-fog sheets, manual, and screw rod included in the package.
Included components: Waterproof case, anti-fog sheets, manual, and screw rod.

3. Specifications

Feature Detail
Model Number OA-WTP-003
Dimensions (L x W x H) 90mm x 80mm x 42mm
Weight 95.6g
Material PC (Polycarbonate)
Waterproof Depth Up to 45 meters
Compatible Action Camera Brands DJI Osmo Action 3, Action 4, Action 5 Pro
Lens Material Tempered Glass
Button Material 316 Marine Grade Stainless Steel

4. Setup Instructions

Follow these three simple steps to prepare your camera for underwater use:

  1. Open the Case: Locate the buckle on the waterproof case and open it to release the back cover.
  2. Insert the Camera: Carefully place your DJI Osmo Action camera into the case, ensuring it is seated correctly and aligned with the internal padding and lens opening.
  3. Lock the Case: Close the back cover and snap the locking latch securely into place. Press gently to ensure a tight seal.
Three-step instruction for opening, inserting camera, and locking the waterproof case.
Visual guide for case setup.

5. Operating Instructions

Once your camera is securely housed, you can use it for various underwater activities:

  • Underwater Photography/Videography: The case allows for clear shooting with 95% light transmittance, ensuring vibrant colors and sharp images. The tempered glass lens protects against scratches while maintaining optical quality.
  • Anti-fog Sheets: To prevent fogging due to temperature differences, insert the complimentary anti-fog sheets into the designated slot inside the case before closing it. Replace sheets as needed for optimal performance.
  • Button Operation: The 316 marine-grade stainless steel buttons provide precise tactile feedback, allowing you to operate your camera's functions reliably while underwater.
Diagram showing anti-fog sheet placement inside the waterproof case.
Placement of anti-fog sheets.
Collage of activities (snorkeling, surfing, deep diving) suitable for the waterproof case.
The waterproof case is suitable for snorkeling, surfing, and deep diving.

6. Maintenance and Cautions

Maintenance:

  • After each use, especially in saltwater, rinse the exterior of the waterproof case thoroughly with fresh water to prevent prolonged seawater erosion.
  • Store the product in a cool, ventilated, and dry place. The storage temperature should not exceed 40 degrees Celsius.

Cautions:

  1. Always check the integrity of all product parts before each use.
  2. Ensure the back door rubber ring is correctly positioned and free from any obvious impurities (e.g., sand, hair, dust) before closing the case. Impurities can compromise the waterproof seal.
  3. Verify that the waterproof back door is closed correctly and the locking latch is fully tightened before submerging the case in water.
Image showing the waterproof case protecting the camera underwater with light rays.
Adequate security provided by the hard shell in complex underwater environments.

7. Troubleshooting

  • Fogging Inside Case: If you notice fogging, ensure you have inserted the anti-fog sheets. If fogging persists, replace the sheets with fresh ones. Fogging is often caused by temperature differences between the camera and the environment.
  • Potential Water Leakage: Immediately remove the case from water. Thoroughly inspect the back door's rubber ring for any debris, damage, or improper seating. Ensure the locking latch is fully engaged and the back door is properly aligned before re-testing.

8. User Tips

  • Underwater Performance: This case is highly effective for underwater shooting, providing excellent waterproof performance and maintaining image clarity.
  • Out-of-Water Use: While designed for protection, some users have noted that the case may not be ideal for photography out of water due to potential condensation or tiny droplets forming, which can affect image quality. It is primarily optimized for submerged use.
  • Compatibility: This case is confirmed to be compatible with DJI Osmo Action 3, Action 4, and Action 5 Pro. It is NOT compatible with the Osmo Action 6.

9. Warranty and Support

TELESIN provides a 1-year warranty for this product. For any issues or support inquiries, please contact TELESIN customer service. Additionally, the product is eligible for free returns within 90 days of purchase.

For further assistance, please refer to the official TELESIN website or contact their authorized support channels.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.