DinoFire Q216 Wireless Pro Controller User Manual

1. Setup and Connection

1.1 Initial Charging

Before first use, fully charge the controller. Connect the included USB-C charging cable to the controller's USB-C port and the other end to a power source (e.g., Nintendo Switch dock, PC USB port, or USB wall adapter). A full charge takes approximately 3 hours and provides 12-16 hours of play time.

Visual representation of the controller's 1000mAh battery capacity, offering 16 hours of play time and requiring 3 hours for a full charge.

1.2 Connecting to Nintendo Switch / Switch Lite / Switch OLED

1. From the HOME Menu, select 'Controllers' > 'Change Grip/Order'.
2. Press and hold the SYNC Button on the top of the Pro Controller for at least 3 seconds. The player LEDs on the bottom of the controller will flash as it searches for the console.
3. Once paired, the player LED(s) corresponding to the controller number will remain lit.

1.3 Connecting to PC (Windows 7 and above)

• Wired Connection: Connect the controller to your PC using the USB-C cable. The controller will be recognized as an X-Input device, compatible with most PC games, including Steam games.
• Bluetooth Connection: For wireless PC connection, a Bluetooth receiver (not included with all models) may be required. Ensure your PC has Bluetooth enabled. Go to Bluetooth settings on your PC, search for new devices, and select the 'Pro Controller' to pair.

1.4 Connecting to Android / iOS (iOS 13 and above)

The controller supports wireless connection for Android HID games and iOS MFI games (iOS 13.0 and above).

1. Enable Bluetooth on your Android or iOS device.
2. Put the controller into pairing mode (usually by holding the SYNC button or a specific combination of buttons, refer to device-specific instructions if needed).
3. Select the 'Pro Controller' from the list of available Bluetooth devices on your phone or tablet to pair.

An illustration demonstrating the multi-device compatibility of the controller, including Nintendo Switch, PC, iOS, and Android platforms.

2. Operating Instructions

2.1 Power On/Off

• Power On: Press the HOME button to turn on the controller.
• Power Off: The controller will automatically power off after a period of inactivity. Alternatively, you can manually disconnect it from the host device.

2.2 Custom Lighting Effects

The controller features 9 different adjustable LED colors. Use the dedicated LED CONTROL BUTTON (refer to the controller diagram for location) to cycle through the colors and select your preferred lighting effect.

Multiple controllers showcasing the 'Innovative Cool Lighting' feature with 9 different LED colors, which can be switched via the LED control button.

2.3 Programmable Back Buttons (M1/M2)

The controller includes two programmable back buttons, M1 and M2, located on the underside. These buttons can be assigned the function of 1-16 basic buttons (A, B, X, Y, L, R, ZL, ZR, etc.). When programming, the controller records the time interval between button presses, allowing you to assign complex combo skills to a single M1 or M2 button for optimized gameplay.

A detailed view of the controller's back, highlighting the M1 and M2 buttons and explaining their function for assigning basic button combinations.

2.4 Adjustable Turbo Function

The controller supports both auto and manual TURBO modes. You can assign the TURBO function to A, B, X, Y, L, ZL, R, or ZR keys. There are three adjustable TURBO speeds:

• 5 shots/second
• 12 shots/second
• 20 shots/second

Refer to the controller's specific button combinations for activating and adjusting the TURBO function.

2.5 4-Level Vibration Function

The controller features dual vibration motors with four precise vibration levels:

• None
• Weak
• Medium
• Strong

Adjust the vibration intensity through the back vibration adjustment keys to enhance game immersion.

2.6 6-Axis Gyro Sensor

A built-in 6-axis gyro sensor allows for precise control of direction and view in compatible games, offering an immersive gaming experience.

This image combines visual explanations for the Auto & Manual Turbo function with its three adjustable speeds (5/s, 12/s, 20/s), the 4-level vibration settings (None, Weak, Moderate, Strong), and the precision offered by the 6-axis gyro sensor in a gaming scenario.

3. Maintenance

3.1 Cleaning

To clean the controller, use a soft, dry cloth. For stubborn dirt, slightly dampen the cloth with water. Avoid using harsh chemicals, solvents, or abrasive cleaners, as these can damage the controller's finish and internal components.

3.2 Storage

Store the controller in a cool, dry place away from direct sunlight, extreme temperatures, and high humidity. Keep it away from dust and liquids. If storing for an extended period, ensure the battery is partially charged (around 50%) to prolong its lifespan.

3.3 Battery Care

The controller contains a rechargeable lithium-ion battery. To maximize battery life:

• Avoid completely draining the battery frequently.
• Do not leave the controller charging for excessively long periods after it's full.
• Avoid exposing the controller to extreme heat or cold.

4. Troubleshooting

4.1 Controller Not Connecting/Pairing

• Ensure the controller is charged.
• Verify the host device's Bluetooth is enabled and discoverable.
• Try resetting the controller by pressing the small reset button (if available, usually a pinhole) or holding the SYNC button for a longer duration.
• Remove previous pairings from the host device's Bluetooth settings and attempt to pair again.

4.2 Buttons/Joysticks Not Responding

• Check if the controller is properly connected to the host device.
• Restart the controller and the host device.
• Ensure no physical obstructions are preventing button presses or joystick movement.
• If using a wired connection, try a different USB port or cable.

4.3 Turbo/Vibration/Gyro Not Working

• Ensure these features are enabled and configured correctly according to the operating instructions.
• Some games may not fully support all controller features.
• Check for any specific game settings that might override controller functions.

4.4 Charging Issues

• Ensure the USB-C cable is securely connected to both the controller and the power source.
• Try a different USB-C cable or power adapter.
• Verify the power source is functioning correctly.

5. Specifications

6. User Tips

• First Use: Always fully charge the controller before its initial use to calibrate the battery and ensure optimal performance.
• Experiment with Settings: Take time to experiment with the adjustable Turbo speeds and vibration levels to find the settings that best suit your gaming style and preferences for different games.
• Utilize Back Buttons: The programmable M1/M2 back buttons can significantly enhance gameplay by allowing quick access to complex actions. Practice assigning common combos to these buttons.
• Firmware Updates: Periodically check the manufacturer's official website for any available firmware updates for your controller. Updates can improve performance, add new features, or fix bugs.
• Compatibility Check: While broadly compatible, always check game-specific settings or requirements, especially for PC games, to ensure full feature support.

7. Warranty and Support

For warranty information, technical support, or service inquiries, please refer to the documentation provided with your purchase or contact the seller/manufacturer directly. Keep your proof of purchase for warranty claims.