1. Introduction
Thank you for purchasing the VAORLO Bluetooth 5.1 DJ Wireless Gaming Headset, Model LX-8686. This headset is designed to provide a versatile audio experience for gaming, music, and calls across various platforms including mobile phones, PCs, TVs, PS4, and PS5. It features Bluetooth 5.1 connectivity, a built-in microphone, RGB LED lighting, and support for TF cards for direct music playback. This manual provides detailed instructions for setup, operation, maintenance, and troubleshooting to ensure optimal performance and longevity of your device.
Video: Product demonstration showing folding, controls, and TF card insertion.
2. Product Overview
2.1 Headset Components and Controls
The VAORLO LX-8686 headset features a foldable design for portability, soft head beam, and breathable earmuffs for comfort during extended use. It also includes RGB LED gradient lights for a stylish appearance.
Image: VAORLO Graffiti Headphones with a Bluetooth adapter.
Control Buttons and Ports:
Image: Headphone controls showing power button, mode switch, play/pause/answer/hang up button, charging socket, audio line jack, and TF memory card jack.
- Power button / M: Power on/off, Mode switch.
- Play/Pause / Answer/Hang up: Control media playback and calls.
- Charging socket: For charging the headset.
- Audio Line jack: For wired connection using the 3.5mm AUX cable.
- TF memory card jack: For direct music playback from a TF card.
Image: Headphone controls showing next track (long press volume +) and previous track (long press volume -) buttons.
- Next track (long press volume +): Short press for next track, long press to increase volume.
- Previous track (long press volume -): Short press for previous track, long press to decrease volume.
2.2 P4 Adapter Overview (for PS4)
The P4 Adapter is a Bluetooth USB Dongle 4.0 Receiver specifically designed for PS4 controllers, enabling wireless audio for gaming. It allows you to use your Bluetooth headset with the PS4 for game audio and voice chat.
Image: P4 Bluetooth USB Adapter Dongle 4.0 Receiver for PS4 Controller shown with a PS4 console and controller.
2.3 T7 Adapter Overview (4-in-1 Wireless Adapter)
The T7 Adapter is a versatile 4-in-1 Bluetooth 5.0 Audio Transmitter/Receiver Adapter. It can wirelessly transfer audio from non-Bluetooth devices (like TVs, PCs, home stereos) to Bluetooth headphones/speakers (Transmitter Mode) or from Bluetooth-enabled devices (phones, tablets) to wired speakers/headphones (Receiver Mode).
Image: T7 Adapter, a four-in-one USB wireless adapter.
3. Specifications
3.1 Headset Specifications (Model: LX-8686)
| Feature | Specification |
|---|---|
| Material | Plastic |
| Sound Isolating | Yes |
| Earcups Type | Semi-open |
| Max Output | 3mW |
| Number Of Drivers | 2 |
| Charging Method | Cable (USB) |
| Headphone Pads Material | Memory Foam |
| Magnet Type | Other |
| Driver Diameter | 40mm |
| Total Harmonic Distortion | 1% |
| Impedance Range | up to 32 Ω |
| Bluetooth Version | 5.0 |
| Features | With microphone, Active Noise Cancelling |
| Codecs | sbc |
| With Microphone | Yes |
| Is wireless | Yes |
| Support APP | Yes |
| Waterproof | No |
| Line Length | 1.2m |
| Frequency Response Range | 20 - 20000Hz |
| Sensitivity | 103dB |
| Plug Type | Line Type |
| Function | Monitor Headphone, for Video Game, Common Headphone, For Mobile Phone, HiFi Headphone, Sport, For Hearing Aid, For Outdoor, For Office, For DJ, For Study |
| Active Noise-Cancellation | Yes |
| Volume Control | Yes |
| Control Button | Yes |
| Vocalism Principle | Orthodynamic |
| Wireless Type | Bluetooth |
| Connectors | USB |
| Communication | Wireless+Wired |
| Style | Headphone |
| Certification | CE |
| Support Memory Card | Yes |
| Battery Capacity | 200mAh |
| Charge Time | About 2 hours |
| Call Duration | ≤6 hours |
| Standby Time | ≤200 hours |
| Transmission Range | ≤10 meters |
Image: Headphone product information table with model number LX-8686 and key specifications.
3.2 P4 Adapter Specifications
| Feature | Specification |
|---|---|
| Color | Black |
| Standard | Bluetooth 4.0 |
| HCI Interface | USB2.0 |
| Transmission Range | 10M |
| Connection | Piconet / Scatternet Support |
| Bluetooth Profile | A2DP, HFP, HSP |
| Output Power | 0~+4dBm |
| Receiving Sensitivity | ~75dB |
| Frequency Band | 2.4G ISM band |
| Audio Codec | 16bit codec |
| Working Voltage | 5V |
| Transmitter Size | 3.5x2.0cm (1.38x0.79 inch) |
| Receiver Length | 1.10 inch |
Image: P4 Adapter product parameters including input voltage, Bluetooth version, transmission distance, and input interface.
3.3 T7 Adapter Specifications
| Feature | Specification |
|---|---|
| Product Name | Audio Wireless Adapter |
| Input Voltage | DC / 5V |
| Bluetooth Version | Wireless 5.0 |
| Transmission Distance | 15 meters |
| Input Interface | 3.5mm audio |
| Drive | No installation required |
| Operation Range | Up to 15m (without any blocking objects) |
Image: T7 Adapter product parameters including product name, input voltage, Bluetooth version, transmission distance, input interface, and dimensions.
4. Setup Instructions
4.1 Headset Setup
4.1.1 Charging the Headset
Before first use, fully charge the headset. Connect the provided USB cable to the charging socket on the headset and to a USB power source (e.g., computer USB port, USB wall adapter). The charging time is approximately 2 hours.
Image: Headphone battery life and charging time information, indicating 2 hours charging time.
4.1.2 Powering On/Off
- Power On: Press and hold the Power button until the LED lights illuminate.
- Power Off: Press and hold the Power button until the LED lights turn off.
4.1.3 Bluetooth Pairing (Headset Only)
To connect the headset directly to a Bluetooth-enabled device (e.g., smartphone, laptop with built-in Bluetooth):
- Ensure the headset is powered on and in Bluetooth pairing mode (usually indicated by a flashing LED).
- On your device, go to Bluetooth settings and search for available devices.
- Select "LX-8686" (or similar name) from the list to pair.
- Once paired, the LED indicator on the headset will show a steady light.
Image: Headphones connected to a laptop via Bluetooth 5.0 chip for faster and more stable connection.
4.2 P4 Adapter Setup (for PS4)
The P4 Adapter is specifically for PS4 consoles. It is not suitable for use with computers or TVs.
- Turn on your PS4 console.
- Insert the P4 Adapter into one of the USB ports on the PS4.
- Press the button on the P4 Adapter for 2 seconds. The LED indicator will start flashing slowly, indicating it has entered pairing mode.
- Turn on your Bluetooth headset and put it into pairing mode.
- The LED indicator on the P4 Adapter will turn blue once successfully connected to your headset.
- For subsequent uses, the P4 Adapter and your headset will automatically pair.
Image: P4 Adapter inserted into a PS4 USB port.
4.3 T7 Adapter Setup (4-in-1 Wireless Adapter)
The T7 Adapter can function in two main modes: Transmitter (TX) and Receiver (RX).
4.3.1 Switching Modes
The T7 Adapter has a dual signal one-key switch. Long press the function key to switch between modes.
Image: T7 Adapter showing one-click switch between receive and launch modes. Red light indicates launch mode, blue light indicates receiving mode.
4.3.2 Transmitter Mode (TX) Setup
Use this mode to send audio from non-Bluetooth devices (e.g., TV, PC, laptop) to your Bluetooth headset or speaker.
Image: T7 Adapter in launch mode, indicated by a red light, connected to a laptop.
- Plug the T7 Adapter into a USB port for power supply (e.g., USB charger, TV, computer). The device will power on and the red indicator light will flash quickly, entering launch mode.
- Insert the 3.5mm audio cable into the T7 Adapter's 3.5mm audio port and the other end into the audio output interface of your source device (e.g., TV, PC, projector).
- Turn on your wireless audio receiving device (e.g., Bluetooth headphones, wireless speakers) and put it into pairing mode. The T7 Adapter will automatically pair. The red indicator light will remain on once paired.
- If the T7 Adapter does not connect to your desired device, press the function key on the adapter to search for the next wireless audio receiving device.
Image: T7 Adapter connected to a laptop, wirelessly streaming audio to a Bluetooth speaker.
Image: T7 Adapter connected to a laptop, wirelessly streaming audio to Bluetooth headphones.
4.3.3 Receiver Mode (RX) Setup
Use this mode to receive audio from Bluetooth-enabled devices (e.g., smartphone, tablet) and play it through wired speakers or headphones.
Image: T7 Adapter in receive mode, indicated by a blue light, connected to a wired speaker.
- Plug the T7 Adapter into a USB port for power supply. The device will power on, and the blue indicator light will flash quickly, entering receiving mode.
- Insert the 3.5mm audio cable into the T7 Adapter's 3.5mm audio port and the other end into the AUX input of your wired playback device (e.g., headphones, speakers, car stereo).
- On your Bluetooth-enabled device (e.g., smartphone), search for "Wireless Music ADAPTE" (or similar name) in the Bluetooth settings and pair with it. The indicator on the T7 Adapter will become a steady blue light once successfully connected.
Image: T7 Adapter showing wireless 5.0 for stronger compatibility and faster, more stable connection.
5. Operating Instructions
5.1 Headset Operation
5.1.1 Music Playback
- Play/Pause: Short press the Play/Pause button.
- Next Track: Short press the "Next track" button.
- Previous Track: Short press the "Previous track" button.
- Volume Up: Long press the "Next track" button.
- Volume Down: Long press the "Previous track" button.
5.1.2 Call Handling
- Answer/End Call: When a call comes in (in receive mode), press the Play/Pause button to answer or end the call.
Image: P4 Adapter features including answering phone calls.
5.1.3 TF Card Playback
Insert a TF memory card (not included) into the TF memory card jack on the headset to play music directly from the card.
Image: Headphones with TF card inserted.
5.2 P4 Adapter Operation (for PS4)
Once the P4 Adapter is paired with your Bluetooth headset, you can enjoy wireless audio for your PS4 games. The adapter supports A2DP for sending music to the headset and HFP for voice intercom (chat).
Image: P4 Adapter in use with a PS4, controller, and headphones.
5.3 T7 Adapter Operation (4-in-1 Wireless Adapter)
5.3.1 Transmitter Mode (TX)
After successful setup, the T7 Adapter will wirelessly stream audio from your non-Bluetooth source device to your paired Bluetooth headphones or speakers. This mode does not support microphone input.
Image: T7 Adapter connected to a laptop's USB port.
5.3.2 Receiver Mode (RX)
Once paired, the T7 Adapter will receive audio wirelessly from your Bluetooth-enabled device and output it through the connected wired speakers or headphones. This mode supports hands-free calling with its built-in microphone.
Image: T7 Adapter showing audio line jack for wired connection.
6. Maintenance
- Keep the headset and adapters dry. Avoid exposure to moisture or liquids.
- Clean the devices with a soft, dry cloth. Do not use harsh chemicals or abrasive cleaners.
- Store the headset in a cool, dry place away from extreme temperatures.
- When not in use, fold the headset to save space and protect it.
- Avoid dropping or subjecting the devices to strong impacts.
Image: Headphones with soft head beam suitable for long wear.
Image: Headphones with breathable earmuffs for comfort.
7. Troubleshooting
7.1 General Headset Issues
- Headset not powering on: Ensure the headset is fully charged.
- Cannot pair headset with device:
- Make sure the headset is in pairing mode (flashing LED).
- Ensure Bluetooth is enabled on your device and it's searching for new devices.
- Move the headset closer to the device.
- Try restarting both the headset and the device.
- No sound or low volume:
- Check the volume levels on both the headset and the connected device.
- Ensure the headset is properly paired and connected.
- If using a wired connection, ensure the 3.5mm AUX cable is fully inserted into both the headset and the audio source.
7.2 P4 Adapter Specific Issues
- P4 Adapter not working with certain headset brands: This product is currently not suitable for Sony, BOSE, or JBL headsets.
- Cannot hear music, only sound (PS4): If you only hear game sound and not background music when using the P4 Adapter, you may need to adjust your PS4 audio settings. Go to PS4 audio settings and ensure the "off" option for host audio is turned "on" to enable background music.
- P4 Adapter not connecting to any earphones: Ensure the PS4 is on, the adapter is plugged into a USB port, and you've pressed the adapter button for 2 seconds to enter pairing mode (slow flashing LED). Then, put your Bluetooth headset into pairing mode.
7.3 T7 Adapter Specific Issues
- No audio in Transmitter (TX) mode: Ensure the 3.5mm audio cable is correctly connected to the audio output of your source device and the T7 Adapter. Verify the T7 Adapter is in TX mode (red light).
- No audio in Receiver (RX) mode: Ensure the 3.5mm audio cable is correctly connected to the AUX input of your wired playback device and the T7 Adapter. Verify the T7 Adapter is in RX mode (blue light).
- T7 Adapter not pairing: Ensure the adapter is in the correct mode (TX or RX) and its indicator light is flashing for pairing. Move devices closer and try restarting.
8. User Tips
- TF Card: The SD/TF card is not included with the headset and must be purchased separately for direct music playback.
- P4 Adapter Compatibility: The P4 adapter is exclusively for PS4 game consoles and cannot be used with computers or smart TVs.
- T7 Adapter Versatility: The T7 adapter is suitable for desktop computers and some smart TVs, offering both transmitting and receiving functionalities.
- Wired Mode: For devices without Bluetooth or when battery is low, use the included 3.5mm AUX cable for a wired connection.
Image: Headphones with a 'No Box' label, indicating that the retail box is not included with some purchase options. SD card is not included in the parcel.
9. Warranty & Support
We check the quality of all goods before shipment. If you encounter any unexpected problems, please contact the seller directly for assistance. If it is a quality problem, you may file a defense within 15 days after receiving the goods, providing evidence such as photos or videos for confirmation. Man-made damage is not covered.
For further support or inquiries, please contact the VAORLO 3C STORE customer service.