Jonsbo N2

Contents

JONSBO N2 NAS Mini Case Instruction Manual

Model: N2

1. Product Overview

The JONSBO N2 is a compact, all-aluminum ITX chassis designed for Network Attached Storage (NAS), home office, and server applications. It features a 5-bay hot-swappable hard disk system, supporting ITX motherboards and offering efficient cooling in a small form factor.

JONSBO N2 NAS Mini Case in white, showing internal components and hard drive bays

Figure 1: JONSBO N2 NAS Mini Case with internal view.

Video 1: JONSBO N2 Product Overview, demonstrating features and assembly.

2. Specifications

FeatureSpecification
ModelN2 (White/Black)
Dimensions (W x D x H)222.5mm x 222.5mm x 224mm
MaterialExternal cover: 2.0mm Aluminum alloy; Internal Structure: 1mm Steel
Drive Bays1 x 2.5" SSD, 5 x 3.5" HDD (Hot-swappable)
Motherboard SupportITX
PCI Expansion Slot1 x Low profile single slot
Front I/O Ports1 x USB3.0, 1 x USB3.2 Gen2 Type-C, Audio+Mic (Headset+mic combined)
PSU SupportSFX (Max length ≤150mm)
Max. CPU Cooler Height≤65mm
Max. Display Card Length≤197mm (Low profile)
Cooling System1 x 12015mm fan (built-in)
Net Weight2.9kg
Detailed specifications table for JONSBO N2 NAS Mini Case

Figure 2: Comprehensive product specifications.

3. Setup Guide

3.1 Preparing the Chassis

The JONSBO N2 chassis is designed for easy assembly. The front panel features a removable ventilation grille for access to the hard drive bays. The top cover can also be removed for easier installation of internal components.

JONSBO N2 white case with front panel open, revealing hard drive bays

Figure 3: Front panel removal for hard drive access.

3.2 Motherboard and CPU Cooler Installation

  • The N2 supports Mini-ITX motherboards.
  • Ensure your CPU cooler height does not exceed 65mm.

3.3 Power Supply Unit (PSU) Installation

  • Install an SFX power supply unit. The maximum supported PSU length is 150mm.
  • The PSU is mounted at the bottom of the chassis.

3.4 Hard Drive Installation

The N2 features 5 hot-swappable 3.5-inch HDD bays and one 2.5-inch SSD bay. The hot-plug backplane uses a server-level 10µm gold-plated SAS hot-plug interface for stable power supply and data integrity.

JONSBO N2 white case with hard drives being inserted into hot-swappable bays

Figure 4: Hot-swappable hard drive installation.

Diagram of the server-level hot plug backplane with gold-plated SAS interface and solid state capacitors

Figure 5: Server-level hot-plug backplane details.

Important Note:

When connecting SATA data cables to the hot-plug backplane, an elbow SATA data cable must be used. Using a straight-head data cable may cause physical damage to the backplane when the hard drive is pushed into the bay. This type of damage is not covered under warranty.

3.5 PCI Expansion Card Installation

  • The chassis supports one low-profile single PCI expansion slot.
  • Maximum display card length is 197mm (low profile). This slot can be used for network cards, RAID cards, video capture cards, or other high-speed SSD/SATA expansion cards.
Internal view showing the PCI Half Height Extension Bit slot

Figure 6: PCI Half Height Extension Bit for expansion cards.

3.6 Front I/O Ports

The front panel provides convenient access to:

  • 1 x USB 3.0 port
  • 1 x USB 3.2 Gen2 Type-C port (10Gbps) for high-speed data transmission
  • Audio + Mic combined port (for headsets)
Close-up of the front panel showing USB 3.0, USB 3.2 Gen2 Type-C, and audio/mic ports

Figure 7: Front panel connectivity.

4. Operating Instructions

Once all components are installed and connected, ensure all cables are securely fastened. Connect the power cable to the PSU and the chassis to your display and peripherals. Press the power button on the front panel to start your system.

4.1 Hot-Swapping Hard Drives

The N2's hot-swappable drive bays allow for easy replacement or addition of 3.5-inch hard drives without powering down the system, provided your operating system and motherboard support hot-swapping functionality. Consult your operating system and motherboard documentation for proper hot-swap procedures.

4.2 Data Transmission

Utilize the front USB 3.2 Gen2 Type-C port for high-speed external data transmission, offering speeds up to 10Gbps. The USB 3.0 port provides standard high-speed connectivity at 5Gbps.

5. Maintenance

5.1 Cleaning and Dust Management

To maintain optimal performance and cooling, regularly clean the chassis. The removable ventilation grille on the front panel and other ventilation openings are equipped with dust filters to prevent dust accumulation. Gently remove the grille and filters for cleaning with compressed air or a soft brush.

Exploded view of the fan and dust filter components

Figure 8: Exploded view of fan and dust filter for maintenance.

5.2 Cooling System

The N2 includes a built-in 12015mm fan at the rear to provide forced cooling, especially for the hard disk bays, ensuring stable operation. Ensure the fan is free from obstructions and clean for efficient airflow.

Internal view showing the rear 12015mm cooling fan

Figure 9: Rear cooling fan for hard drive temperature management.

5.3 Stability

The chassis is equipped with an anti-skid base to ensure stability and reduce vibrations. Ensure the case is placed on a flat, stable surface.

Bottom view of the JONSBO N2 case showing the anti-skid base

Figure 10: Anti-skid base for enhanced stability.

6. Troubleshooting

  • System not powering on: Double-check all power connections, including the PSU to the motherboard and components. Ensure the power button cable is correctly connected to the motherboard.
  • Hard drives not detected: Verify that all SATA data and power cables are securely connected to both the hard drives and the hot-plug backplane. Remember to use elbow SATA data cables to prevent damage.
  • Overheating issues: Ensure the built-in fan is operating correctly and is free from dust. Check that all ventilation grilles are clear and not obstructed.
  • USB devices not recognized: Confirm that the front I/O panel cables are properly connected to the motherboard headers.

7. User Tips

  • The HDD holders for the 3.5-inch drives are included with the case, so there's no need to purchase them separately.
  • While the case provides the structure, you will need to install a motherboard, CPU, RAM, PSU, and hard drives to build a functional system. It is not a ready-to-use system by simply adding hard drives.
  • Consider the specific requirements of your NAS software or operating system when selecting internal components to ensure compatibility and optimal performance.

8. Warranty and Support

This product comes with a 1-year warranty from the date of purchase from our store. In case of any quality problems within 7 days of receipt, you are eligible for a return.

For any inquiries or support needs, please contact our customer service. All emails will be answered within 24 hours.

JONSBO N2 NAS Mini Case Instruction Manual. All rights reserved.


Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.