DEKO DKMS85Q2/TMK02

Contents

DEKO 85mm Mini Electric Circular Saw Instruction Manual

Model: DKMS85Q2/TMK02 (also known as QD6908)

Introduction

The DEKO 85mm Mini Electric Circular Saw (Model DKMS85Q2/TMK02, also referred to as QD6908) is a powerful and functional tool designed for various cutting tasks. Its lightweight and compact design allows for easy and comfortable operation, even with one hand. This circular saw is suitable for cutting wood, wood-like materials, plastics, tiles, printed circuit boards, and glass fiber reinforced plastics.

This manual provides essential information for the safe and effective use of your DEKO Mini Electric Circular Saw. Please read it thoroughly before operation and keep it for future reference.

DEKO Mini Circular Saw with accessories
Overall view of the DEKO Mini Circular Saw with included accessories.

Setup

1. Unpacking and Inspection

Carefully remove the circular saw and all accessories from the packaging. Inspect for any damage that may have occurred during transit. Ensure all components listed in the 'Commodities Include' section are present.

Mini Circular Saw and accessories in a carry box
The Mini Circular Saw and its accessories neatly packed in a carry box.

2. Blade Installation

  1. Ensure the saw is unplugged from the power source.
  2. Locate the blade locking mechanism and the arbor bolt.
  3. Use the provided Allen key to loosen the arbor bolt.
  4. Carefully remove the old blade (if any) and insert the new blade, ensuring the teeth are oriented correctly for cutting.
  5. Tighten the arbor bolt securely with the Allen key.
Mini Circular Saw with various blades and Allen key
The circular saw with different blades and the Allen key for installation.

3. Adjusting Cutting Depth

The saw allows for quick and easy depth adjustments up to 26mm. To adjust the cutting depth:

  1. Loosen the depth adjustment knob/lever located on the side of the saw.
  2. Move the base plate up or down to achieve the desired cutting depth, indicated by the scale.
  3. Tighten the depth adjustment knob/lever firmly to secure the setting.
Close-up of depth adjustment mechanism
Close-up view of the depth adjustment mechanism on the saw.

4. Attaching Auxiliary Handle (Optional)

For improved stability and reduced operational difficulty, an auxiliary round handle can be mounted on the front end of the saw.

Saw with auxiliary handle, showing comfortable operation
The circular saw equipped with an auxiliary handle for enhanced control.

5. Dust Passage Connection

Connect the dust passage accessory to the saw's dust extraction port to maintain a cleaner work area and improve visibility during operation.

Operating Instructions

1. Safety First: Double Switch Operation

The DEKO Mini Circular Saw features a double safety switch mechanism to prevent accidental startup. To operate the saw, you must first push the small safety switch, and then simultaneously press the main trigger switch. Releasing either switch will stop the saw.

Hand pressing the double safety switches
Demonstration of engaging the double safety switches for operation.

2. Making Cuts

  1. Ensure your workpiece is securely clamped.
  2. Set the desired cutting depth (refer to 'Adjusting Cutting Depth' above).
  3. Hold the saw firmly with both hands (if using the auxiliary handle) or one hand if comfortable and stable.
  4. Engage the double safety switch and allow the blade to reach full speed before contacting the workpiece.
  5. Guide the saw smoothly along the cutting line, applying steady, even pressure. Do not force the saw.
  6. Once the cut is complete, release the trigger switch and allow the blade to stop completely before lifting the saw from the workpiece.
Person using the saw to cut a wooden board
The circular saw in action, cutting a wooden board.

3. Using the Parallel Guide

For precise straight cuts, attach the parallel guide to the saw's base plate. Adjust the guide to the desired distance from the blade and secure it. This will help maintain a consistent cutting line.

Saw with parallel guide for precise cuts
The saw equipped with a parallel guide for accurate straight cuts.

4. Material Compatibility

The DEKO Mini Circular Saw is designed to cut a variety of materials including wood, wood-like materials, plastics, tiles, printed circuit boards, and glass fiber reinforced plastics. Always ensure you are using the correct blade type for the material you are cutting.

Product demonstration video showing blade change and cutting operations.

Maintenance

Regular maintenance ensures the longevity and safe operation of your circular saw.

1. Cleaning

  • Always unplug the tool before cleaning.
  • Clean the tool's exterior with a soft, damp cloth. Do not use harsh chemicals or abrasive cleaners.
  • Remove sawdust and debris from the blade guard, base plate, and motor vents using a brush or compressed air.

2. Blade Care

  • Regularly inspect saw blades for sharpness and damage. Dull or damaged blades can cause kickback and poor cutting performance.
  • Replace worn or damaged blades immediately with appropriate types for your cutting material.

3. Storage

Store the circular saw in a dry, secure location, out of reach of children. If possible, use the original carry box for protection.

Troubleshooting

If you encounter issues with your DEKO Mini Electric Circular Saw, refer to the following common problems and solutions:

  • Saw does not start:
    • Check if the power cord is securely plugged into a working outlet.
    • Ensure both the small safety switch and the main trigger switch are pressed simultaneously.
    • Verify there is power to the outlet.
  • Poor cutting performance / Blade binding:
    • The blade may be dull or damaged; replace it if necessary.
    • Ensure you are using the correct blade type for the material being cut.
    • Check that the cutting depth is set correctly and not too deep for the material.
    • Ensure the workpiece is securely clamped and the cutting line is clear.
    • Do not force the saw; apply steady, even pressure.
  • Excessive vibration or noise:
    • Check if the blade is properly installed and the arbor bolt is tightened.
    • Inspect the blade for damage or warping.
    • Ensure all external fasteners on the saw are tight.

For issues not covered here, please contact DEKO customer service.

Specifications

FeatureSpecification
Model NumberDKMS85Q2/TMK02 (QD6908)
Brand NameDEKO
Saw TypeCircular Saw
Power SourceAC (Corded-Electric)
Rated Voltage230V
Frequency50Hz
Rated Input Power / Power Consumption600W
Wattage500W-799W
No-Load Speed7000rpm / 7000/min
Blade Diameter85mm
Max. Cutting Depth26mm (0-26mm)
Weight3.891kg
Dimensions30*22*9mm
CertificationCE
Protection ClassDouble Insulated
Application / UseWood Saw, Home DIY
Battery IncludedNo
High-concerned chemicalNone
Plug TypeEU Plug
Included Accessories1 Mini Circular Saw, 4 saw blades, 1 Dust passage, 1 Allen key, 1 BMC BOX, 1 User Manual

Warranty and Support

Warranty Information

The DEKO Mini Electric Circular Saw comes with a 12-month free replacement warranty. This warranty covers manufacturing defects and malfunctions under normal use.

Exceptions to Warranty:

  • Man-made damage or violent use.
  • Repair without authorization.
  • Normally worn parts.
Warranty information graphic
Graphic detailing the 12-month free replacement warranty.

Customer Support

If you need help with warranty problems or have any questions regarding the product, please feel free to contact DEKO customer service. Provide relevant videos or vouchers if applicable. During business hours, after-sales issues are typically handled within 24 hours.

User Tips

  • Material Versatility: While the saw is versatile for many materials, it is not explicitly designed for cutting iron. Always use the correct blade for the specific material to ensure safety and optimal performance.
  • Safety First: Always engage the double safety switch correctly. This two-step process is crucial for preventing accidental starts.
  • Stable Operation: For longer or more critical cuts, consider attaching the auxiliary handle and using the parallel guide to enhance stability and precision.
  • Dust Management: Utilize the dust passage accessory to keep your workspace clean and improve visibility, which also contributes to safer operation.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.