ORIA Digital LED Alarm Clock User Manual

Introduction

Thank you for choosing the ORIA Digital LED Alarm Clock. This modern and versatile alarm clock features a large, high-definition curved LED display, dual alarms, adjustable brightness, and flexible power options. This manual provides detailed instructions to help you set up and operate your new alarm clock effectively.

Front view of the ORIA Digital LED Alarm Clock.

Package Contents

• 1 x ORIA Digital LED Alarm Clock
• 1 x USB Cable
• 1 x User Manual

The ORIA Digital LED Alarm Clock and its included accessories.

Product Overview

Familiarize yourself with the components and controls of your alarm clock.

Front Display Elements: Week, Time, Dual Alarm Indicators (Alarm 1, Alarm 2), AM/PM Indicator.

Rear Controls: TIME SET button, ALARM SET button, UP button (+), DOWN button (-), RESET button, DC 5V power input, 3AAA Battery compartment, Alarm 1 ON/OFF switch, Alarm 2 ON/OFF switch, Non-slip pads.

Setup Instructions

1. Powering the Alarm Clock

Your alarm clock offers two power options:

• USB Power (Recommended for continuous display): Connect the included USB cable to the DC 5V port on the back of the alarm clock and plug the other end into a USB power adapter (not included) or a powered USB port. When powered by USB, the backlight will remain continuously on.
• Battery Power (Backup/Temporary Display): Insert 3 AAA batteries (not included) into the battery compartment on the back. When powered by batteries, the screen will automatically turn off after 8 seconds to conserve power. To wake the screen, touch the top button.

Dual Power Supply options: USB for continuous backlight, 3AAA batteries for temporary backlight.

2. Initial Time Setting

1. Press and hold the "TIME SET" button on the back of the clock. The hour display will start flashing.
2. Use the "UP" (+) and "DOWN" (-) buttons to adjust the hour.
3. Press "TIME SET" again to confirm the hour and move to minute setting. The minute display will flash.
4. Use the "UP" (+) and "DOWN" (-) buttons to adjust the minutes.
5. Press "TIME SET" again to confirm the minutes.
6. The clock will then prompt for 12/24 hour format. Use "UP" (+) or "DOWN" (-) to select your preferred format.
7. Press "TIME SET" one last time to save all settings and exit time setting mode.

Operating Instructions

1. Adjusting Display Brightness

The clock features 4 levels of adjustable brightness (100%, 80%, 60%, 0%).

• To adjust brightness, short press the "UP" (+) or "DOWN" (-) buttons during normal time display.
• Cycle through the brightness levels to find your preferred setting.

Visual representation of the 4 adjustable brightness levels.

2. Setting Alarms (Dual Alarms)

The clock supports two independent alarms (Alarm 1 and Alarm 2).

1. Select Alarm: Use the Alarm 1 ON/OFF or Alarm 2 ON/OFF switch on the back to select which alarm you want to set. Ensure the alarm is turned ON (switch in the ON position).
2. Enter Alarm Setting: Press and hold the "ALARM SET" button. The alarm hour display will start flashing.
3. Set Alarm Hour: Use the "UP" (+) and "DOWN" (-) buttons to adjust the desired alarm hour.
4. Set Alarm Minute: Press "ALARM SET" again to confirm the hour and move to minute setting. Use "UP" (+) and "DOWN" (-) to adjust the minutes.
5. Select Alarm Mode: Press "ALARM SET" again. The display will show the current alarm mode. Use "UP" (+) or "DOWN" (-) to cycle through the 5 available alarm modes:
   • 1-1: One day (single alarm)
   • 1-5: Monday to Friday
   • 1-6: Monday to Saturday
   • 1-7: Monday to Sunday (every day)
   • 6-7: Saturday to Sunday (weekend)
6. Save Settings: Press "ALARM SET" one last time to save the alarm settings and exit.

The five programmable alarm modes for flexible scheduling.

3. Using the Snooze Function

When an alarm sounds, touch the top surface of the alarm clock to activate the snooze function. This will provide an additional 5 minutes of sleep before the alarm sounds again. The snooze duration is adjustable and can be set to infinite snooze.

Touch the top of the clock to activate the snooze function for 5 extra minutes of sleep.

4. Resetting the Clock

If you need to reset the clock to its factory default settings, locate the "RESET" button on the back of the unit. Use a thin, pointed object (like a paperclip) to press and hold the RESET button for a few seconds. This will clear all settings.

Maintenance

• Cleaning: Wipe the clock with a soft, dry cloth. Do not use abrasive cleaners or solvents.
• Battery Replacement: If using battery power, replace the 3 AAA batteries when the display becomes dim or unresponsive. Ensure correct polarity when inserting new batteries.
• Storage: If storing the clock for an extended period, remove the batteries to prevent leakage.

Troubleshooting

Q: The display is off or only shows for 8 seconds.

A: This is normal behavior when the clock is powered by batteries to conserve energy. To keep the display continuously on, connect the clock via the USB cable to a power source.

Q: The alarm is not sounding.

A: Ensure the corresponding alarm switch (Alarm 1 ON/OFF or Alarm 2 ON/OFF) on the back of the clock is in the ON position. Also, verify that the alarm time and mode are set correctly.

Q: I cannot set the time or alarm.

A: Make sure you are pressing and holding the "TIME SET" or "ALARM SET" button until the digits flash, indicating entry into setting mode. Use the "UP" (+) and "DOWN" (-) buttons to make adjustments.

Q: The clock is unresponsive.

A: Try performing a reset using the "RESET" button on the back with a thin, pointed object. If using batteries, replace them. If using USB, try a different USB port or adapter.

Specifications

User Tips

• For a continuously lit display, always use the USB power cable. Battery power is best for backup or when you prefer the display to turn off automatically after a short period.
• The clock supports both 12-hour and 24-hour time formats, which can be selected during the initial time setup.
• The alarm sound is designed to be effective for waking. While specific sound types are not listed, it functions as a standard digital alarm.
• The battery life when running solely on AAA batteries is not specified, but it's primarily intended for temporary use or power outages, as the display will turn off after 8 seconds to conserve power.

Warranty and Support

For any issues with product operation, function, defects, or damage, please contact the seller directly for assistance. They will provide support to resolve any concerns you may have.

Product Video Demonstration