Introduction
The Essager EB01 Bluetooth 5.0 Audio Receiver is designed to upgrade traditional audio systems, such as car stereos, home speakers, or amplifiers, with Bluetooth connectivity. This device allows for wireless audio streaming from your smartphone or tablet and supports hands-free calling, enhancing your listening and communication experience.
Image: The Essager EB01 Bluetooth 5.0 Audio Receiver with its coiled cable and 3.5mm jack.
Package Contents
- Essager EB01 Bluetooth 5.0 Audio Receiver
- User Manual (this document)
Setup and Installation
The Essager EB01 is designed for plug-and-play operation, powered directly via a USB port.
-
Connect to Power and Audio:
Plug the USB end of the adapter into a USB power source (e.g., a car's USB port, a USB car charger, or a USB wall adapter). Then, plug the 3.5mm AUX jack into your car's AUX input or your speaker system's 3.5mm audio input.
Image: The Essager EB01 adapter connected to a car's USB power port and 3.5mm AUX jack.
-
Power Indicator:
Once powered, a small LED indicator on the USB receiver will light up, indicating it's ready for pairing.
-
Bluetooth Pairing:
On your smartphone or tablet, navigate to the Bluetooth settings. Turn on Bluetooth and search for available devices. Select "EB01" from the list to pair.
Image: Visual guide showing the steps for connecting the adapter and pairing via Bluetooth on a smartphone.
-
Automatic Reconnection:
After the initial pairing, the device will automatically connect to the last paired device when powered on, provided the device's Bluetooth is active and within range.
Operating Instructions
-
Wireless Audio Streaming:
Once successfully paired, you can stream audio wirelessly from your connected device to your car stereo or home speaker system. Control playback (play/pause, skip tracks) directly from your smartphone or tablet.
Image: A smartphone displaying music playback, connected wirelessly to a car audio system via the Essager EB01 adapter.
-
Hands-Free Calling:
The EB01 features a built-in microphone for hands-free calling. When a call comes in, the audio will switch to the car's speakers (or connected audio system), allowing you to answer and speak through the adapter's microphone. This promotes safer driving by keeping your hands on the wheel.
Image: A driver on a call using the hands-free function of the adapter, with the phone displaying an incoming call.
Maintenance and Care
- Keep the device dry and away from moisture.
- Avoid extreme temperatures.
- Clean with a soft, dry cloth. Do not use harsh chemicals or abrasive cleaners.
- Handle the 3.5mm jack and USB connector with care to prevent damage. The gold-plated plug is designed for durability, but physical stress can still cause issues.
Image: Close-up of the gold-plated 3.5mm plug, highlighting its durable construction.
Troubleshooting
-
No Power/Device Not Turning On:
Ensure the USB connector is fully inserted into a functional USB power port. If your car lacks a dedicated USB port, use a car charger with a USB-A output.
Image: The adapter receiving power from a car's USB port.
-
No Audio/Poor Sound Quality:
Verify that the 3.5mm AUX jack is securely connected to your audio system's input. Check the volume levels on both your connected device and the audio system. Ensure your speaker device is in good condition, as damaged equipment can affect sound quality. The adapter features anti-interference circuitry for pure sound quality.
Image: Diagram illustrating the high-fidelity transmission and anti-interference design of the audio cable.
-
Device Not Pairing:
Make sure Bluetooth is enabled on your smartphone/tablet and that the device is within the 10-meter transmission range. Try restarting both your phone's Bluetooth and the audio receiver (by unplugging and re-plugging the USB). Ensure no other devices are actively connected to the EB01.
-
Does it have a battery?
No, the Essager EB01 does not have an internal rechargeable battery. It operates solely on USB power (Plug and Play). It is not recommended to use portable power banks with low power consumption, as this may lead to automatic shutdown.
-
Is it a transmitter or receiver?
The Essager EB01 functions as a Bluetooth audio receiver. It receives audio signals from your Bluetooth-enabled device (like a phone) and outputs them via the 3.5mm AUX jack to your non-Bluetooth audio system. It does not transmit audio from a non-Bluetooth source to Bluetooth headphones/speakers.
Specifications
| Feature | Detail |
|---|---|
| Brand | ESSAGER |
| Model | EB01 (also referred to as ES-BTO6) |
| Bluetooth Version | 5.0 |
| Output Port | 3.5mm Audio Jack |
| Power Interface | USB |
| Material | Aluminum Alloy + ABS |
| Color | Black |
| Cable Length | Spring Wire: 0.35m (Normal) to 1.1m (Stretch) |
| Transmission Distance | Up to 10 meters (33 feet) |
| Features | HiFi Sound, Built-in Microphone, Auto-Connect, Plug & Play |
| Certifications | CE, FCC, RoHS |
Image: Detailed product parameters including dimensions, material, and Bluetooth version.
User Tips
-
Wide Compatibility: This adapter is compatible with various audio systems that have a 3.5mm AUX input, including car audio systems, home amplifiers, and regular wired speakers.
Image: Diagram showing the adapter's compatibility with laptops, smartphones, tablets, car audio systems, regular speakers, and amplifiers.
-
Beyond Car Use: Don't limit its use to just your car. You can effortlessly turn your traditional wired home speakers into wireless ones, allowing you to enjoy music freedom anywhere in your home.
Image: The Essager EB01 adapter connected to a home speaker system, demonstrating its versatility.
- Optimal Power: For stable operation, ensure the USB power source provides sufficient power. Avoid using low-power portable banks that might cause the device to shut down automatically.
Warranty and Support
For warranty information or technical support, please refer to the seller's policy or contact the ESSAGER Official Store directly. Keep your purchase receipt for any warranty claims.
