Introduction
Thank you for choosing the Liectroux M7S Robot Vacuum Cleaner. This manual provides essential information for setting up, operating, maintaining, and troubleshooting your new robot vacuum. Please read it thoroughly to ensure optimal performance and longevity of your device.
The Liectroux M7S is an advanced, multifunctional robot vacuum cleaner designed for efficient and thorough cleaning of various floor types. It features intelligent navigation, powerful suction, and smart home integration for a convenient cleaning experience.
Key Features
- Smart Dynamic Navigation: Utilizes 2D map navigation and gyroscope technology for precise positioning and planned cleaning routes, ensuring thorough coverage without repeating areas.
- Powerful Suction: Equipped with a brushless frequency conversion motor, providing up to 4000Pa suction power to effectively remove dust, dirt, and debris from various surfaces.
- Wet & Dry Mopping: Features a large-area mop and a constant pressure water tank (200ml capacity) for balanced wet mopping, ensuring even permeation and effective stain removal.
- Intelligent Control: Supports WiFi App control for remote operation, scheduling, and monitoring. Compatible with Alexa and Google Home for voice commands.
- Advanced Sensors: Includes anti-collision infrared sensors to protect furniture, anti-falling ground sensors for stairs (detects heights above 8cm), and twining-proof design for side brushes.
- Automatic Recharging: The coordinate memory algorithm enables the robot to find its charging station and recharge automatically when the battery is low.
- Compact Design: With a height of 7.8cm, it can easily pass under most furniture, cleaning hard-to-reach areas.
- Low Noise Operation: Designed with noise reduction techniques for quiet cleaning.
Package Contents
Ensure all items are present and in good condition upon unboxing:
- Main Unit (Liectroux M7S Robot Vacuum Cleaner)
- Dustbin Box
- Water Tank & Mop
- Charging Station
- HEPA Filter
- Side Brushes (set)
- Remote Control
- Power Adapter
- Cleaning Brush
Setup Guide
1. Charging Station Placement
Place the charging station against a wall in an open area, ensuring there are no obstacles within 1 meter to the sides and 2 meters in front. Connect the power adapter to the charging station and plug it into a wall outlet. Ensure the charging station is always powered on.
2. Initial Charging
Place the robot vacuum onto the charging station. Ensure the charging contacts on the robot align with those on the station. The indicator light on the robot will show charging status. Fully charge the robot before its first use (approximately 4-5 hours).
3. Installing Side Brushes
Attach the side brushes to the corresponding posts on the bottom of the robot until they click into place.
4. Installing Dustbin or Water Tank
The robot comes with a dustbin and a water tank with an integrated mop. Choose the appropriate module for your cleaning needs:
- For Dry Vacuuming: Insert the dustbin into the robot until it locks securely.
- For Wet Mopping: Fill the water tank with clean water (do not use cleaning solutions that may clog the tank). Attach the mop pad to the water tank. Insert the water tank with the mop into the robot until it locks securely.
5. App Installation and Connection (WiFi Control)
Download the Liectroux app from your smartphone's app store. Follow the in-app instructions to connect your robot vacuum to your home WiFi network. This enables remote control, scheduling, and real-time cleaning map viewing.
6. Voice Assistant Integration
The Liectroux M7S is compatible with Alexa and Google Home. Refer to the respective voice assistant app for instructions on how to link your robot vacuum for voice control.
Operating Instructions
1. Starting/Stopping Cleaning
- Via App: Open the Liectroux app and press the 'Start' button for one-press cleaning.
- Via Robot Button: Press the power button on the robot's top panel to start or pause cleaning.
- Via Remote Control: Use the provided remote control to start, pause, or direct the robot.
2. Cleaning Modes
The Liectroux M7S offers multiple cleaning modes to suit different needs:
- Zigzag Cleaning Mode: The robot cleans in an efficient zigzag path, covering the entire area thoroughly.
- Along the Wall Cleaning: The robot cleans along the edges of rooms and furniture to ensure no corner is missed.
- Fixed Point Cleaning Mode: Focuses on a specific area for intensive cleaning.
- Make-up Cleaning: If any area is missed, the robot will return to clean it.
- Schedule Cleaning: Set specific times for the robot to clean automatically via the app.
3. Navigation and Mapping
The robot uses 2D map navigation and gyroscope technology to scan and map your home, allowing it to plan the most efficient cleaning path and avoid repeating areas. It also features intelligent partition cleaning, allowing you to define cleaning zones.
4. Obstacle Avoidance and Climbing
The robot is equipped with infrared sensors for anti-collision and ground sensors for anti-falling, preventing it from bumping into furniture or falling down stairs (detects heights above 8cm). Its shockproof resilient wheels allow it to climb obstacles and thresholds less than 1.5cm high. The twining-proof design helps prevent side brushes from getting tangled in wires.
Maintenance
Regular maintenance ensures your Liectroux M7S operates efficiently and extends its lifespan.
1. Emptying and Cleaning the Dustbin
After each cleaning cycle, or when the dustbin is full, remove it from the robot. Open the dustbin lid and empty the contents into a trash bin. The 600ml trash box is designed for easy removal and cleaning.
2. Cleaning Filters
The dustbin contains primary and HEPA filters. Remove these filters and gently tap them to dislodge dust. For thorough cleaning, you may rinse the primary filter with water, but ensure it is completely dry before reinserting. HEPA filters should not be washed and should be replaced periodically (every 3-6 months depending on usage).
3. Cleaning the Water Tank and Mop Pad
After mopping, empty any remaining water from the tank. Remove the mop pad and wash it thoroughly. Allow both the tank and mop pad to air dry completely before reassembling or storing.
4. Cleaning Side Brushes
Regularly check the side brushes for tangled hair or debris. Remove any obstructions carefully. If brushes are worn or damaged, replace them with new ones.
5. Cleaning Sensors and Charging Contacts
Wipe the robot's sensors (infrared, anti-fall) and the charging contacts on both the robot and the charging station with a clean, dry cloth to ensure proper function and charging.
Troubleshooting
If you encounter issues with your Liectroux M7S, refer to the following common problems and solutions:
- Robot not turning on: Ensure the robot is fully charged. Check if the power button is pressed correctly.
- Robot not charging: Verify that the charging station is powered on and the robot's charging contacts are clean and properly aligned with the station.
- Robot getting stuck frequently: Clear obstacles from the cleaning path. The robot's 7.8cm compact framework helps it navigate under furniture, but ensure there are no tight spaces it cannot exit. The twining-proof feature should help with wires.
- Robot falling down stairs: Ensure the anti-falling sensors are clean and unobstructed. The sensors detect drops greater than 8cm.
- Poor cleaning performance: Empty the dustbin, clean or replace filters, and clean the side brushes. Ensure the water tank is filled and the mop pad is clean for mopping.
- App connectivity issues: Ensure your robot is within WiFi range and your WiFi network is stable. Re-pair the device if necessary following the app instructions.
- Robot not returning to charging station: Ensure the charging station is accessible and not blocked. The coordinate memory algorithm helps it find its way back.
Specifications
| Feature | Specification |
|---|---|
| Brand Name | Liectroux |
| Model | M7S |
| Product Type | Robot Vacuums |
| Function | Wet and Dry |
| Power (W) | <500w |
| Suction Power | Upgraded to 4000Pa (from 3000Pa) |
| Voltage | 14.8 V |
| Battery Capacity | 2600MAH Lithium-ion (4400mAh mentioned in image) |
| Battery Life | 1 hour and 40 minutes |
| Dust Box Capacity (L) | 0.6-1 L (600ml mentioned in video) |
| Water Tank Capacity | 200ml (from video) |
| Filter Type | HEPA (HEPA+Primary filters) |
| Navigation | 2D Map & Gyroscope (Planned Type, Smart Memory) |
| Size (mm) | 320*320*78mm (7.8cm height) |
| Noise | 45db |
| Remote Control | Yes |
| Timing Reservation | Yes |
| LCD Display | Yes |
| Brushless Motor | Yes |
| Adjustable Suction Power | Yes |
| Electric Control Water Tank | Yes |
| Big Mop | Yes |
| Special Suction Nozzle | Clean Cyclone Dust Collection Nozzle |
| Dust Storage Type | Dust Box |
| Installation | Robot |
| Certification | EMC, ROHS, GS, CB, CE |
| Origin | De(origin) |
| Hign-concerned Chemical | None |
| Turbo Brush | No |
Warranty and Support
Warranty Information
The Liectroux M7S Robot Vacuum Cleaner comes with a 5-year warranty on the main unit, reflecting the brand's commitment to quality and German advanced technology. The battery typically includes a one-year warranty.
Return Policy
Enjoy free returns within 90 days of purchase. Please refer to the seller's return policy for detailed terms and conditions.
Delivery Guarantee
Your purchase is protected by a delivery guarantee. This includes:
- A $1.00 coupon code if delivery is delayed.
- Refund if the package is lost.
- Refund if items are damaged.
- Refund if no delivery within 30 days.
Security & Privacy
We prioritize your security and privacy:
- Safe payments: Your personal details are not shared with any third parties without your consent.
- Secure personal details: Your privacy is protected, and personal details are kept safe and secure.
Customer Support
For further assistance, technical support, or warranty claims, please contact the Liectroux Direct Store customer service through the platform where you made your purchase.
