Introduction
Thank you for choosing the REWARD RD81101M Chronograph Quartz Watch. This manual provides detailed instructions for setting up, operating, and maintaining your watch to ensure optimal performance and longevity. Please read this manual carefully before using your watch.

Figure 1: REWARD RD81101M Chronograph Quartz Watch (Blue/Rose Gold variant)
Watch Features
- Movement: Quartz
- Display Type: Analog with Arabic Numeral Markers
- Features: Stop Watch, Back Light, Luminous Hands, Auto Date, Chronograph, Complete Calendar, Water-Resistance
- Crystal Material: Hardlex Mineral Glass (Scratch-Free, Anti-Fingerprints, Anti-Glare, Highly Transparent, Anti-broken)
- Case Material: Alloy
- Band Material: Stainless Steel
- Clasp Type: Bracelet Clasp
- Water Resistance: 3ATM (30 meters)

Figure 2: Detailed Features of the REWARD RD81101M Watch

Figure 3: Mineral Glass Properties
Setup and Adjustment
Your REWARD watch is designed for ease of use. Follow these steps to set the time, date, and operate the chronograph functions.

Figure 4: Watch Function Diagram
1. Setting the Time
- Pull the crown (middle button on the right side) out to the second click position.
- Rotate the crown to adjust the hour and minute hands to the desired time.
- Push the crown back to the normal position to start the watch.
2. Setting the Date
- Pull the crown out to the first click position.
- Rotate the crown clockwise or counter-clockwise (depending on the movement) to adjust the date.
- Once the correct date is displayed, push the crown back to the normal position.
3. Operating the Chronograph (Stopwatch)
The chronograph feature allows you to measure elapsed time.
- Start/Pause: Press the top button (A) to start the chronograph. Press it again to pause.
- Reset: While the chronograph is paused, press the bottom button (B) to reset all chronograph hands to their zero positions.
4. Luminous Feature
The watch hands and markers are coated with a luminous material. To activate the glow, expose the watch to a bright light source (natural or artificial) for a few minutes. The intensity and duration of the glow will depend on the exposure time and light intensity.
5. Band Adjustment
The stainless steel bracelet can be adjusted for a comfortable fit. If you need to remove or add links, it is recommended to visit a professional watch repair shop or use the provided band adjustment tool (if included in your package) with care. Refer to Figure 5 for an example of included accessories.

Figure 5: Watch with included accessories (may vary)
Operating Guidelines
Water Resistance
Your REWARD watch has a water resistance rating of 3ATM (30 meters). This means it is suitable for everyday use and can withstand splashes, rain, and brief immersion in water, such as during hand washing or car washing. It is NOT suitable for showering, swimming, strenuous exercise in water, shallow diving, or deep-sea diving.

Figure 6: 30 Meters Waterproof - Suitable for Everyday Use

Figure 7: Watch Water Resistance Guide
Important Water Resistance Notes:
- Do not operate the crown or pushers while the watch is wet or submerged in water.
- Ensure the crown is fully pushed in before any contact with water.
- Water resistance is not a permanent condition and may decrease over time due to wear and tear or accidental impact.
- Avoid exposing the watch to hot water or steam, as this can compromise the seals.
Maintenance and Care
Cleaning Your Watch
Regularly clean your watch with a soft, dry cloth to remove dust, dirt, and perspiration. For the stainless steel band, a slightly damp cloth can be used, followed by immediate drying. Avoid using harsh chemicals or abrasive materials.
Battery Replacement
The watch is powered by a quartz movement and requires a battery. When the watch stops or the second hand starts skipping, it's an indication that the battery needs replacement. It is highly recommended to have the battery replaced by a qualified watch technician to ensure proper sealing and maintain water resistance.
Environmental Considerations
- Temperature: Avoid exposing your watch to extreme temperatures (above 60°C or below 0°C) or sudden temperature changes.
- Magnetic Fields: Keep your watch away from strong magnetic fields, such as those emitted by speakers, refrigerators, or mobile phones, as this can affect the accuracy of the quartz movement.
- Shocks: While durable, avoid severe impacts or drops to prevent damage to the internal components or exterior.
Troubleshooting
- Watch Not Running: Check if the crown is fully pushed in. If it is, the battery may need replacement.
- Incorrect Time/Date: Follow the 'Setting the Time' and 'Setting the Date' instructions in the Setup section.
- Chronograph Hands Not Resetting to Zero: If the chronograph hands do not return to the 12 o'clock position after resetting, consult a professional watch technician for adjustment.
- Condensation Inside the Watch: This indicates a loss of water resistance. Immediately take the watch to a professional for inspection and repair to prevent further damage.
Specifications

Figure 8: Watch Dimensions and Key Specifications
| Feature | Specification |
|---|---|
| Model Number | RD81101M |
| Movement | Quartz |
| Case Material | Alloy |
| Case Thickness | 12mm |
| Case Size (Diameter) | 44mm |
| Band Material Type | Stainless Steel |
| Band Length | 24cm (240mm) |
| Band Width | 20mm |
| Dial Window Material Type | Hardlex (Mineral Glass) |
| Water Resistance Depth | 3Bar (30m) |
| Watch Weight | 150g |
| Battery Included | Yes |
| Certifications | CE, FCC, RoHS |
User Tips
- Case Material Clarification: The watch case is made of alloy, while the band is stainless steel. This combination offers a balance of durability and aesthetic appeal.
- Luminous Feature: For best results, expose the watch to direct light for a few minutes before entering a dark environment to maximize the glow of the luminous hands and markers.
- Band Adjustment: If adjusting the band yourself, proceed with caution. Many users find it easier and safer to have a jeweler or watch repair professional perform this task to avoid scratching the watch or damaging the links.
Warranty and Support
Your REWARD watch is covered by a manufacturer's warranty against defects in materials and workmanship. Please refer to the warranty card included with your purchase for specific terms and conditions. For technical support, service, or warranty claims, please contact the retailer or authorized service center where you purchased the watch.
Product Video
Product showcase video, displaying the watch from various angles, highlighting its design, and demonstrating the luminous feature.