Introduction
The ANDELI TIG-250G PRO is a versatile 5-in-1 IGBT Inverter welding machine designed for a wide range of welding tasks. It supports HOT TIG, Cold Spot, MMA (Stick), CLEAN, and TIG Pulse functions, operating on both 110V and 220V power supplies. This manual provides essential information for the safe and effective operation, maintenance, and troubleshooting of your welding machine.

Figure 1: ANDELI TIG-250G PRO Welding Machine and Included Accessories
Safety Information
Always prioritize safety when operating welding equipment. Failure to follow safety precautions can result in serious injury or death.
- Eye and Face Protection: Always wear a welding helmet with appropriate shade lenses to protect against arc flash and sparks.
- Body Protection: Wear flame-resistant clothing, gloves, and safety shoes.
- Ventilation: Ensure adequate ventilation to remove welding fumes, which can be hazardous.
- Fire Hazards: Keep flammable materials away from the welding area. Have a fire extinguisher readily available.
- Electrical Safety: Ensure the machine is properly grounded. Do not operate in wet conditions. Inspect cables and connections for damage before each use.
- Gas Cylinders: Secure gas cylinders to prevent tipping. Use appropriate regulators and hoses.
- Work Area: Keep the work area clean and free of clutter.
Product Overview
Features
- Multi-functionality: Supports HOT TIG, Cold Spot, MMA, CLEAN, and TIG Pulse welding modes.
- IGBT Inverter Technology: High efficiency (exceeding 85%) and reliability, allowing for a high duty cycle.
- Compact and Lightweight Design: Up to 25% lighter than conventional models, enhancing portability.
- Silent Fan Design: Maintains a quiet welding environment.
- Remote Control TIG Torch: Allows real-time adjustment of parameters and function switching directly from the torch.
- Cleaning Function: Designed to clean welding beads, restoring their original shiny appearance. (Note: Cleaning solution, HCl at 0.175-0.035% concentration, must be purchased locally).
- Suitable Materials: Effective for welding angle steel, mild steel, sheet metal, and stainless steel.
- Protection Features: IP21S protection standard, overload protection, overheating protection, and antistatic capabilities.
Components
The ANDELI TIG-250G PRO typically includes the following components:

Figure 2: Included Accessories
- ANDELI TIG-250G PRO Welding Machine
- Ground Clamp
- MMA Holder
- Gas Pipe
- Hose Clamps (x2)
- TIG Torch Nozzles (x10)
- TIG Torch Collets (x10)
- Welding Rods (x5)
- Remote Control TIG Torch (4M)
Control Panel

Figure 3: Control Panel Overview
The control panel features a digital display and various buttons and knobs for selecting welding modes and adjusting parameters. Key indicators include voltage selection (110V/220V), welding current display, pulse frequency, and mode selection buttons for TIG, Cold Spot, MMA, and Clean functions.
Specifications

Figure 4: TIG-250G PRO Technical Specifications
| Function | Cold Welding | TIG | MMA | Cold Welding | TIG | MMA | ||
|---|---|---|---|---|---|---|---|---|
| Spot | Pulse | Spot | Pulse | |||||
| Power Supply Voltage(V) | 220 | 110 | ||||||
| No-Load Voltage(V) | 53 | 53 | ||||||
| Frequency(Hz) | 50 | 50 | ||||||
| Power Factor | 0.8 | 0.8 | ||||||
| Efficiency(%) | 80% | 80% | ||||||
| Rated Input Power(KW) | 6 | 4 | ||||||
| Rated Input Current(A)Imax | 25.2 | 35.5 | ||||||
| Effective Input Current(A)Ieff | 12 | 18 | ||||||
| Welding Current Range(A) | 5-150 | / | 5-120 | 5-130 | / | 5-105 | / | / |
| Post-Flow Time(S) | 0.5-5S | |||||||
| Cold Welding Time(S) | 1-200 | |||||||
| Cold Welding Interval(Hz) | 1-20 | |||||||
| Pulse Frequency(Hz) | 1-20 | |||||||
| Base Current(A) | 10 | |||||||
| Welding Thickness(MM) | 0.3-4 | |||||||
| Protection Class | IP21S | |||||||
| Insulation Class | F | |||||||
| Cooling | Air Cooling | |||||||
| Dimension(MM) | 370×140×225 | |||||||
| Net Weight(KG) | 5.5 | |||||||
Setup Instructions
- Power Connection: Connect the welding machine to a suitable 110V or 220V power outlet. Ensure the correct voltage is selected on the machine if applicable.
- Ground Clamp Connection: Attach the ground clamp cable to the negative (-) terminal of the welding machine. Secure the ground clamp to the workpiece or welding table, ensuring good electrical contact.
- TIG Torch Connection: Connect the TIG torch cable to the positive (+) terminal of the welding machine. Connect the gas hose from the TIG torch to your argon gas regulator.
- Gas Cylinder: Ensure your argon gas cylinder is securely fastened and the regulator is properly attached. Open the cylinder valve slowly.
- MMA Holder Connection (for Stick Welding): If performing MMA welding, connect the MMA holder cable to the positive (+) terminal and the ground clamp to the negative (-) terminal.
- Remote Control Torch: Connect the remote control cable from the TIG torch to the designated port on the welding machine.
- Electrode/Tungsten Installation: Install the appropriate tungsten electrode and nozzle/collet for TIG welding, or the correct electrode for MMA welding.
Operating Modes

Figure 5: Fully Functional TIG Welding Machine Modes
1. TIG Welding (HF TIG Welding)
This mode uses High-Frequency (HF) arc ignition for precise and clean welds. The pulse function allows for controlled heat input, which is beneficial for thin materials and achieving a consistent weld bead.

Figure 6: HF TIG Welding
2. Cold Spot Welding (Low Temp Spot)
Cold Spot welding is ideal for minimizing heat input, preventing deformation and discoloration of the workpiece. This mode requires the use of pure argon gas.

Figure 7: Low Temp Spot Welding
3. MMA Welding (Stick Welding)
The MMA mode provides stable current for stick welding. It is compatible with various electrode types, including 6011, 6013, and 7018 size electrodes.

Figure 8: MMA Welding
4. CLEAN Function
This function is used to clean the welding bead after welding, restoring its original shiny, silver appearance without the need for grinding. The cleaning solution (HCl with a concentration of 0.175-0.035%) must be sourced locally.

Figure 9: Welding Bead Before and After Cleaning
5. TIG Pulse Welding
Pulse TIG welding provides a more controlled arc and heat input, resulting in a uniform welding bead, especially useful for thinner materials or when precise control is needed.
Video 1: Demonstration of TIG Pulse Welding for 3mm Stainless Steel, showing a uniform welding bead.
Remote Control TIG Torch
The included remote control TIG torch allows for convenient adjustment of welding parameters and switching between functions without needing to return to the main machine. Use the '+' and '-' buttons to increase or decrease parameters. A long press (3 seconds) on the 'M' button switches functions, while a short press adjusts parameters.

Figure 10: Remote Control TIG Torch

Figure 11: Remote Control vs. Ordinary TIG Torch
User Tips
- Material Compatibility: The machine is suitable for angle steel, mild steel, sheet metal, and stainless steel. For specialized materials like aluminum, verify the machine's capability and use appropriate settings and shielding gas.
- Fine Welding: For very thin materials (e.g., 0.4mm silver loops), experiment with the lowest possible current and shortest pulse settings to achieve optimal results and prevent burn-through.
- Cleaning Solution: Remember that the cleaning solution for the 'CLEAN' function (HCl 0.175-0.035%) is not included and must be purchased locally.
- Pedal Compatibility: While not explicitly stated, some users inquire about pedal compatibility. If a foot pedal is desired, ensure it is compatible with the TIG-250G PRO model.
Maintenance
Regular maintenance ensures the longevity and optimal performance of your welding machine.
- Cleaning: Periodically clean the machine's exterior and ventilation openings to prevent dust and debris buildup. The silent fan design aids in cooling, but clear airflow is crucial.
- Cable Inspection: Regularly inspect all welding cables, torch, and ground clamp for cuts, fraying, or loose connections. Replace damaged components immediately.
- Tungsten Electrodes/MMA Electrodes: Ensure tungsten electrodes are properly sharpened and free from contamination. Store MMA electrodes in a dry environment.
- Gas System: Check gas hoses and connections for leaks. Ensure the gas regulator is functioning correctly.
- Storage: Store the welding machine in a dry, clean environment, away from excessive dust and moisture.

Figure 12: Strong Heat Dissipation for Durability
Troubleshooting
If you encounter issues with your ANDELI TIG-250G PRO, refer to the following common problems and solutions:
- No Power: Check the power supply connection, circuit breaker, and ensure the machine's power switch is on.
- No Arc: Verify ground clamp connection, check electrode/tungsten installation, ensure gas flow (for TIG), and confirm welding parameters are set correctly.
- Poor Weld Quality: Adjust welding current, voltage, gas flow, and travel speed. Ensure the workpiece is clean and free of contaminants.
- Overheating Indicator: If the overheating indicator illuminates, stop welding and allow the machine to cool down. Ensure proper ventilation around the machine.
- Error Codes: If the digital display shows an error code, consult the full product manual (if available) or contact customer support for specific guidance.
Warranty and Support
The ANDELI TIG-250G PRO comes with a two-year warranty and includes free replacement parts. The product is CE certified, ensuring it meets European safety standards.
For any issues or technical assistance, please contact the customer service team. Returns and exchanges are available within 30 days of receiving the goods.