Develuck Rear-View 1080P AHD Universal Backup Camera User Manual

1. Introduction

Thank you for choosing the Develuck Rear-View Universal Backup Camera. This camera is designed to provide a clear and wide-angle view of your vehicle's rear, enhancing safety during reversing and parking maneuvers. It features high-definition imaging, night vision capabilities, and a waterproof design for reliable performance in various conditions.

2. Package Contents

Please check the package for the following items:

• Rear-View Camera Unit
• Video Cable (6 meters)
• Power Supply Cable (1.5 meters)
• Mounting Screws
• Instruction Manual

3. Specifications

4. Setup and Installation

This camera is designed for universal compatibility with various car display units. Ensure your display unit supports AV input.

4.1 Wiring Diagram

Follow the diagram below for proper installation. Professional installation is recommended.

1. Connect the camera's video output (yellow RCA connector) to the video input of your car monitor/Android player/MP5 player.
2. Connect the camera's power cable (red and black wires) to your vehicle's reversing light circuit. The red wire connects to the positive (+) terminal of the reversing light, and the black wire connects to ground (-).
3. Ensure all connections are secure and insulated.

4.2 Optional Cable Modifications

The camera features two small wires (green and white) near the video cable connector that allow for customization of the display output:

• Green Cable: Cut this cable to disable the parking line display. Keep it intact to show parking lines.
• White Cable: Cut this cable to switch the image from mirror view to non-mirror view (e.g., for front camera use). Keep it intact for mirror image (standard for rear cameras).

5. Operating Instructions

Once properly installed, the camera will automatically activate when your vehicle is put into reverse gear, displaying the rear view on your connected monitor.

• Daytime Operation: The camera provides a clear, wide-angle view of the area behind your vehicle.
• Nighttime Operation: The built-in night vision feature ensures visibility even in low-light conditions, making reversing safer after dark.

6. Maintenance

• Cleaning: Regularly clean the camera lens with a soft, damp cloth to ensure a clear view. Avoid abrasive cleaners.
• Inspection: Periodically check the wiring and connections for any signs of wear or damage.
• Waterproof: The camera is IP68 waterproof, but avoid high-pressure washing directly on the lens.

7. Troubleshooting

If you encounter issues with your camera, please refer to the following common problems and solutions:

No Signal / No Image Displayed:

• Connection Error: Check all wiring connections. Ensure the positive and negative power cables are correctly connected and there are no short circuits that could burn out the power cord.
• Incorrect Video Format: Verify that your monitor's video input format is compatible with the camera's output (NTSC/PAL). If your AHD device monitor only supports CVBS, or if the monitor uses another format, the camera may not display an image. Ensure the purchased camera meets the requirements of your display unit.

Image is Mirrored or Not Mirrored:

• Refer to Section 4.2 (Optional Cable Modifications) and check the status of the white cable. Cut the white cable to switch between mirror and non-mirror image.

Parking Lines Not Displayed or Always Displayed:

• Refer to Section 4.2 (Optional Cable Modifications) and check the status of the green cable. Cut the green cable to disable parking lines; keep it intact to enable them.

8. User Tips

No specific user tips were available from reviews or Q&A at this time. For optimal performance, ensure a clean lens and secure connections.

9. Warranty and Support

This product comes with a 365-day warranty from the date of purchase. For technical support or warranty claims, please contact your retailer or the Develuck Official Store.