Godox TT560II

Contents

Godox TT560II Wireless Camera Flash Speedlite

User Manual

1. Introduction

Thank you for purchasing the Godox TT560II Wireless Camera Flash Speedlite. This versatile flash unit is designed to be compatible with a wide range of DSLR cameras featuring a standard hot shoe, including Canon, Nikon, Sony, Olympus, Pentax, and Fujifilm. With its built-in wireless signal and included RT Remote Transmitter, the TT560II offers flexible triggering options and powerful illumination for your photography needs. Please read this manual carefully to ensure proper operation and to achieve optimal results.

Godox TT560II Camera Flash and RT Transmitter
Figure 1: Godox TT560II Camera Flash and RT Remote Transmitter

2. Package Contents

Please check to ensure all items are included in your package:

  • 1x Godox TT560II Camera Flash
  • 1x RT Remote Transmitter
  • 1x Protection Bag
  • 1x Mini Stand
  • 1x User Manual
Contents of the Godox TT560II package
Figure 2: Included items in the TT560II package

3. Setup

3.1 Battery Installation

  1. Open the battery compartment cover located on the side of the flash unit.
  2. Insert four (4) AA batteries (alkaline or Ni-MH rechargeable batteries are suitable) according to the polarity indicators inside the compartment.
  3. Close the battery compartment cover securely.
Godox TT560II flash with battery compartment open
Figure 3: Battery installation in the TT560II flash

3.2 Mounting the Flash on Camera

  1. Slide the flash unit's hot shoe onto your camera's hot shoe mount.
  2. Tighten the locking ring or lever on the flash unit to secure it firmly to the camera.
Close-up of the flash hot shoe mount
Figure 4: Hot shoe mount detail

3.3 RT Remote Transmitter Setup

  1. Install batteries into the RT Remote Transmitter (typically 2x AAA, though not explicitly stated, common for such devices).
  2. Mount the RT Remote Transmitter onto your camera's hot shoe.
  3. Ensure the channel switches (1, 2, 3, 4) on both the flash and the transmitter are set to the same channel for wireless communication.
  4. Turn on the transmitter using its ON/OFF switch.
RT Remote Transmitter showing channel switches
Figure 5: RT Remote Transmitter with channel settings

4. Operating the Flash

4.1 Power On/Off

Slide the ON/OFF switch on the flash unit to turn it on or off. The power indicator will light up when the flash is on.

4.2 Flash Modes

The TT560II supports the following flash modes:

  • M (Manual) Mode: Allows you to manually set the flash output from 1/128 to full power. Use the '+' and '-' buttons to adjust the power level.
  • S1 (Slave 1) Mode: The flash will fire in sync with the first flash detected from a master flash. This mode is suitable for manual flash or TTL flash systems.
  • S2 (Slave 2) Mode: The flash will fire in sync with the second flash detected, ignoring the pre-flash from a master TTL flash. This mode is ideal for master TTL flash systems.
Godox TT560II flash control panel
Figure 6: TT560II control panel showing mode and power settings

4.3 Wireless Triggering

The TT560II features a built-in 433MHz wireless receiver. When used with the RT Remote Transmitter, you can trigger the flash wirelessly. Ensure both the flash and transmitter are set to the same channel (1-16) for successful communication. The working distance for wireless triggering is approximately 15 meters.

4.4 Flash Head Rotation

The flash head can be rotated to achieve various lighting angles:

  • Vertical Rotation Angle: 0-90 degrees
  • Horizontal Rotation Angle: 0-270 degrees

This flexibility allows for bouncing flash off ceilings or walls to create softer, more natural illumination.

Diagram showing vertical and horizontal rotation angles of the flash head
Figure 7: Flash head rotation capabilities

4.5 Reflection Card and Wide Panel

The flash head includes a pull-out reflection card and a wide panel. The reflection card can be used to create a catchlight in the subject's eyes, while the wide panel helps to spread the light for softer, more natural illumination.

Godox TT560II flash with reflection card and wide panel extended
Figure 8: Reflection card and wide panel in use

4.6 External Power Pack

The TT560II is equipped with a sync socket and terminals for an external power pack (e.g., Godox PB960). This allows for faster recycling times and extended shooting sessions.

5. Maintenance

  • Keep the flash unit dry. Do not handle with wet hands or immerse in water.
  • Clean the flash unit with a soft, dry cloth. Do not use harsh chemicals or abrasive cleaners.
  • Remove batteries when the flash is not in use for extended periods to prevent leakage.
  • Store the flash in its protection bag when not in use to prevent dust and scratches.
  • Avoid strong impacts or dropping the unit.

6. Troubleshooting

  • Flash not firing: Check battery levels in both the flash and the transmitter. Ensure the flash is securely mounted on the camera or that the wireless channel settings match between the flash and transmitter.
  • Inconsistent flash output: Verify battery charge. Ensure the flash head is not obstructed.
  • Flash overheating: The unit has multiple auto-self protections against overheating. If the flash becomes hot, allow it to cool down before further use. Reduce flash power or increase the interval between flashes.
  • Wireless triggering issues: Confirm both the flash and transmitter are on the same channel (1-16) and within the 15m working distance. Check for potential interference from other 433MHz devices.

7. Specifications

FeatureSpecification
Guide Number38 (at 105mm, ISO 100)
Flash ModeM, S1, S2
Vertical Rotation Angle0-90 degrees
Horizontal Rotation Angle0-270 degrees
Power Source4x AA batteries (Alkaline or Ni-MH)
Lighting Times100-1500 times (with AA alkaline batteries)
Recycling TimeApprox. 0.1-5 seconds (with AA alkaline batteries)
Color Temperature5600K ± 200K
Wireless Frequency433MHz
Wireless Channels16
Wireless Working DistanceUp to 15 meters
Flash Duration1/300s - 1/20000s
High-Speed Sync (HSS)No
TTL SupportNo
DisplayNo
Compatible BrandsCanon, Nikon, Sony, Olympus, Pentax, Lumix, FUJIFILM (with standard hot shoe)
CertificationCE

8. User Tips

  • Compatibility Check: The Godox TT560II is designed for cameras with a standard hot shoe. If you are unsure about your camera model's compatibility (e.g., Canon d250), please refer to your camera's manual to confirm it has a standard hot shoe.
  • Battery Life: For optimal performance and recycling times, use high-quality Ni-MH rechargeable batteries.
  • Wireless Range: While the stated working distance is 15m, environmental factors can affect wireless performance. Test your setup in your shooting environment.

9. Warranty and Support

Godox products are manufactured to high-quality standards. For warranty information and technical support, please refer to the documentation provided with your purchase or contact your local Godox distributor. Keep your proof of purchase for warranty claims.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.