1. Introduction
Thank you for choosing the ORIA Cordless Electric Screwdriver HS-90012. This versatile 9-in-1 rechargeable screwdriver set is designed for various home repair and DIY tasks, offering both electric and manual operation. Its compact design, built-in LED light, and USB charging capability make it a convenient tool for everyday use. This manual provides essential information for safe and efficient operation, maintenance, and troubleshooting.

2. Package Contents
Upon opening your ORIA Cordless Electric Screwdriver package, please ensure all items are present and in good condition:
- 1 x ORIA Cordless Electric Screwdriver (HS-90012)
- 1 x USB Charging Cable
- 1 x 100mm PH2 Double-Head Long Bit
- 1 x 9-Hole Bit Holder (containing 8 assorted bits)

3. Setup
3.1 Charging the Screwdriver
- Locate the Micro USB Charging Port on the screwdriver (refer to the product features diagram).
- Connect the provided USB charging cable to the screwdriver's charging port.
- Plug the other end of the USB cable into a compatible USB charger (≤5V 1A).
- The Charge Indicator Light will illuminate red during charging.
- Once fully charged (approximately 60 minutes), the indicator light will turn green.
A full charge provides approximately 150 minutes of operating time or 40 minutes of continuous use.

3.2 Installing Screwdriver Bits
- Select the appropriate bit for your task from the included bit set.
- Insert the bit into the 6.35mm Quick Release Chuck at the front of the screwdriver.
- Push the bit firmly until it clicks into place. The quick-release chuck ensures secure bit retention.
- To remove a bit, pull back on the chuck collar and pull the bit out.
4. Operating Instructions
4.1 Electric and Manual Modes
The ORIA Cordless Electric Screwdriver offers both electric and manual operation:
- Electric Mode: Provides up to 2N.m of torque for light to medium screw driving tasks. Ideal for quick assembly and disassembly.
- Manual Mode: For tasks requiring higher torque or when the battery is depleted, the screwdriver can be used manually, providing up to 10N.m of torque. The self-locking device ensures that the bit will not rotate freely when used manually.

4.2 Forward and Reverse Operation
To operate the screwdriver:
- Forward Mode (Screwing In): Press and hold the top button (Forward Button) to rotate the bit clockwise.
- Reverse Mode (Screwing Out): Press and hold the bottom button (Reverse Button) to rotate the bit counter-clockwise.

4.3 LED Work Light
The screwdriver features a built-in LED light that automatically illuminates when the screwdriver is in operation. This helps to brighten dark work areas, ensuring better visibility of screws and fasteners.

4.4 Product Features Overview

4.5 Video Demonstration
Watch this video for a visual guide on the screwdriver's operation and features:
5. Maintenance
- Cleaning: Wipe the screwdriver body with a soft, dry cloth. Do not use harsh chemicals or abrasive cleaners.
- Storage: Store the screwdriver and bits in a dry place, away from direct sunlight and extreme temperatures.
- Battery Care: For optimal battery life, avoid fully discharging the battery frequently. Charge the screwdriver regularly, even if not in constant use.
- Bit Maintenance: Keep bits clean and free of debris. Replace worn or damaged bits to ensure efficient operation and prevent damage to screw heads.
6. Troubleshooting
- Screwdriver not turning on: Ensure the battery is charged. Connect to a USB charger and check the charge indicator light.
- Bit slipping: Ensure the correct bit size is used for the screw. Make sure the bit is fully inserted and locked into the quick-release chuck.
- Insufficient torque: For tougher screws, switch to manual mode to utilize the higher 10N.m torque. Ensure the battery is fully charged for maximum electric torque.
- LED light not working: Check if the screwdriver is in operation. The LED light activates automatically when the motor is engaged. If the issue persists, contact customer support.
7. Specifications
| Feature | Specification |
|---|---|
| Rotational Speed (No Load) | 280 RPM |
| Torque (Electric) | 2 N.m |
| Torque (Manual) | 10 N.m |
| Chuck Type | 6.35mm Hex Quick Release |
| Hexagon Diameter | 6.35mm |
| Charging Time | 60 minutes |
| Operating Time (Continuous) | 40 minutes |
| Operating Time (Total) | 150 minutes |
| Charging Method | Micro 5pin USB |
| Voltage | 3.6V |
| USB Charger Input | ≤5V 1A |
| Weight | 150g |
| Material | Chrome-vanadium Steel (bits) |
| Features | Multifunctional, Magnetic (bits), With Handle |
| Screw Head Types | SLOTTED, Phillips, TORX, HEX, Square Socket, Pozidriv, Y-Type, Tri-Wing, 5-Point, S-Type, 8-Point, Spline, Spanner, TRIANGLE, H-type |
8. User Tips
- Maximize Battery Life: For tasks that require less power, use the electric mode. For stubborn screws, switch to manual mode to conserve battery and apply more force.
- Optimal Torque Use: Understand the difference between the 2N.m electric torque and 10N.m manual torque. Use electric for speed and manual for power.
- Working in Dark Areas: The automatic LED light is very useful. Position the screwdriver so the light directly illuminates the screw head for best visibility.
- Bit Compatibility: The screwdriver uses 6.35mm hex bits. This is a common size, allowing for expansion of your bit collection if needed.

9. Warranty and Support
ORIA products are manufactured to high-quality standards. For any questions, technical support, or warranty claims, please contact the seller or refer to the product packaging for specific contact information. Keep your purchase receipt as proof of purchase.