1. Introduction
The COOLMOON ARGB Controller is designed to manage and synchronize the lighting and fan speed of your PC cooling fans and chassis radiators. It features a multi-interface design, supporting both 4-pin PWM temperature control and 3-pin ARGB lighting. This controller allows for extensive customization of lighting effects and supports motherboard synchronization with popular brands like ASUS, MSI, Gigabyte, and ASRock. Its magnetic bottom design ensures easy installation within your PC case.

2. Setup Instructions
- Power Off: Ensure your computer system is completely powered off before beginning installation.
- Mounting the Controller: The controller features a magnetic bottom for easy attachment to any metal surface inside your PC chassis. Position it in a convenient location that allows for cable management.
- Connecting Fans (PWM): Connect your 4-pin PWM fans to the 8x 4PIN (PWM) temperature control interfaces on the controller. These are labeled PWM1 through PWM8.
- Connecting ARGB Devices: Connect your 3-pin ARGB lighting devices (fans, LED strips, etc.) to the 10x 3PIN (ARGB Interface) ports on the controller. These are labeled ARGB1 through ARGB10.
- Connecting Power: Connect the provided SATA Power Cable from your power supply unit to the controller's SATA power input.
- Connecting Temperature Signal Cable: Connect the Temperature Signal Cable to the appropriate header on your motherboard (if available and desired for temperature-based fan control).
- ARGB Sync Cable (Optional): If you wish to synchronize the ARGB lighting with your motherboard's software (e.g., ASUS Aura Sync, MSI Mystic Light, Gigabyte RGB Fusion, ASRock Polychrome Sync), connect the provided ARGB Sync Cable from the controller to the 5V 3-pin ARGB header on your motherboard.
Important Safety Note: Always ensure the power is off when connecting or disconnecting cables. Incorrect connections can cause damage to the device or other components.

3. Operating Instructions
Once the controller is installed and connected, power on your computer. The controller can be operated in two primary modes:
3.1 Remote Control Mode
Use the included wireless remote control to manage lighting effects and fan speeds. The remote offers over 360 kinds of lighting effects, allowing for extensive customization even without motherboard synchronization.

3.2 Motherboard Synchronization Mode (AURA Sync)
If you have connected the ARGB Sync Cable to a compatible 5V 3-pin ARGB header on your motherboard, you can control the lighting effects through your motherboard's RGB software (e.g., ASUS Aura Sync, MSI Mystic Light, Gigabyte RGB Fusion, ASRock Polychrome Sync). The remote control allows you to switch between motherboard mode and remote control mode.
3.3 Visual Demonstration
Watch this video for a demonstration of the various RGB lighting effects and how they interact with the controller.
4. Maintenance
To ensure optimal performance and longevity of your COOLMOON ARGB Controller, keep it free from dust and moisture. Periodically, gently clean the exterior with a soft, dry cloth. Do not use liquid cleaners or abrasive materials.
5. Troubleshooting
- No Power/Lights:
- Ensure the SATA power cable is securely connected to both the controller and your power supply.
- Verify that your power supply is functioning correctly.
- ARGB Lights Not Working/Incorrect Colors:
- Check all 3-pin ARGB connections between the controller and your devices. Ensure they are firmly seated and correctly oriented.
- If using motherboard synchronization, ensure the ARGB Sync Cable is properly connected to the 5V 3-pin ARGB header on your motherboard (not a 12V 4-pin RGB header, as this can cause damage).
- Try switching between remote control mode and motherboard sync mode using the remote to isolate the issue.
- Update your motherboard's RGB software to the latest version.
- Fans Not Spinning/Incorrect Speed:
- Check all 4-pin PWM fan connections to the controller.
- Ensure the Temperature Signal Cable is correctly connected if you are relying on temperature-based control.
- If using motherboard control, verify fan settings in your motherboard's BIOS/UEFI or fan control software.
- Remote Control Not Responding:
- Ensure there are no obstructions between the remote and the controller.
- Check the battery in the remote control and replace if necessary.
General Warning: Be sure to plug in the wire when the power is off, and do not plug any interface incorrectly, as this can cause a short circuit and damage the device.
6. Specifications
| Feature | Detail |
|---|---|
| Brand Name | COOLMOON |
| Model Number | ARGB Controller |
| Type | PWM Controller/HUB |
| Dimension | 118 X 55 X 24mm (4.65 X 2.17 X 0.94 inches) |
| Power Interface | 3PIN, 4PIN |
| RGB Support | A-RGB |
| Interface Ports | 8x 4PIN (PWM) + 10x 3PIN (ARGB Interface) |
| Origin | Mainland China |
| Color Options | Black, White |

7. Warranty and Support
For warranty information, technical support, or service inquiries, please contact the manufacturer or your point of purchase. Keep your proof of purchase for any warranty claims.
8. User Tips
- This controller is versatile and can be used for various PC components including cooling fans, radiators, and general PC case lighting.
- The A-RGB support ensures compatibility with a wide range of addressable RGB devices, allowing for complex and dynamic lighting patterns.
- The PWM functionality provides intelligent temperature control for your fans, helping to optimize cooling performance and reduce noise.