BAOFENG UV98PRO

Contents

BaoFeng UV98 Pro Walkie Talkie Instruction Manual

Model: UV98PRO | Brand: BAOFENG

1. Introduction

The BaoFeng UV98 Pro is a professional-grade, powerful, and waterproof dual-band two-way radio designed for reliable communication in various environments. Featuring a robust IP68 waterproof rating, a high-capacity 5800mAh battery, and a 10W output power, this walkie-talkie is suitable for engineering construction, shipping, road transport, outdoor sports, factory parks, and travel. This manual provides essential information for the safe and effective use of your device.

BaoFeng UV98 Pro Walkie Talkie in red, highlighting 10W power, 5800mAh battery, 128 channels, FM radio, and IP68 waterproof rating.
Figure 1.1: BaoFeng UV98 Pro Walkie Talkie with key features.

2. Safety Information

Please read and understand the following safety precautions before operating your BaoFeng UV98 Pro Walkie Talkie:

  • Do not operate the radio in explosive atmospheres (e.g., flammable gases, dust particles, metallic powders).
  • Do not replace or charge batteries in potentially explosive environments.
  • Turn off your radio before entering any area with blasting caps or in a blasting area.
  • Do not use unauthorized accessories, as this may damage the radio or cause injury.
  • Keep the radio away from medical devices to avoid interference.
  • Do not expose the radio to direct sunlight for extended periods or place it near heating appliances.
  • Always ensure the battery is properly installed and secured.
  • Avoid disassembling the radio; repairs should only be performed by qualified technicians.

3. Package Contents

Upon unpacking, please verify that all items listed below are included in your package:

  • BaoFeng UV98 Pro Radio Unit
  • Rechargeable Battery (5800mAh)
  • Type-C Charging Cable
  • Antenna (771 antenna)
  • Belt Clip
  • Lanyard
  • Desktop Charger
  • User Manual (this document)
Diagram showing the package contents including radio, battery, Type-C cable, antenna, belt clip, lanyard, and desktop charger.
Figure 3.1: Included accessories with the BaoFeng UV98 Pro.

4. Product Overview

The BaoFeng UV98 Pro features a user-friendly design with clearly labeled function keys and a clear LCD display. Refer to the diagram below for an overview of the radio's components.

Diagram labeling the function keys and components of the BaoFeng UV98 Pro, including antenna, flashlight, indicator light, PTT key, side keys, menu key, digital keyboard, volume knob, alarm key, speaker, headphone jack, microphone, LCD, and channel switch.
Figure 4.1: Function Keys and Components.

Key Features:

  • Powerful Output: 10W (High), 5W (Mid), 1W (Low) for flexible communication range.
  • Dual Band: Operates on both VHF (136-174MHz) and UHF (400-520MHz) frequencies.
  • High Capacity Battery: 5800mAh for long-lasting standby and operation.
  • IP68 Waterproof: Full body waterproof, capable of being submerged in 2 meters of water for 30 minutes.
  • Durable Design: Pressure and drop resistant, tested to withstand falls from up to 5 floors.
  • FM Radio: Built-in FM radio function.
  • LED Flashlight: High brightness LED for illumination in dark conditions.
  • SOS Alarm: For emergency situations.
  • 128 Channels: Ample storage for various frequencies.
  • Type-C Charging: Modern and convenient charging interface.
Icons representing key features: Powerful power, SOS Alarm prompt, 136-174MHz / 400-520MHz, Long-lasting standby, Pressure and drop resistance, IP68 waterproof, 771 antenna, FM radio, LED flashlight.
Figure 4.2: Overview of Main Features.
Dimensions of the walkie-talkie: 22cm total height with antenna, 13.2cm body height, 5.6cm width, 3.5cm thickness.
Figure 4.3: Product Dimensions.

5. Setup

5.1. Battery Installation

  1. Align the battery with the grooves on the back of the radio.
  2. Slide the battery upwards until it clicks into place.
  3. To remove, press the battery release latch (if present) and slide the battery downwards.

5.2. Antenna Attachment

  1. Screw the antenna into the connector on the top of the radio clockwise until it is finger-tight. Do not overtighten.

5.3. Charging the Battery

Before first use, fully charge the battery. The radio can be charged using the desktop charger or directly via the Type-C port.

  1. Using Desktop Charger: Place the radio (with battery installed) into the desktop charger. Ensure the charging contacts align. The indicator light on the charger will show charging status (e.g., red for charging, green for fully charged).
  2. Using Type-C Cable: Connect the Type-C charging cable to the Type-C port on the side of the radio and plug the other end into a compatible USB power adapter.
Image showing the 5800mAh battery and highlighting power saving features.
Figure 5.1: High capacity battery for extended use.

6. Operating Instructions

6.1. Power On/Off and Volume

  1. Power On: Rotate the Volume knob/switch clockwise until you hear a click. The LCD will light up.
  2. Power Off: Rotate the Volume knob/switch counter-clockwise until you hear a click.
  3. Adjust Volume: Rotate the Volume knob/switch to increase (clockwise) or decrease (counter-clockwise) the audio level.

6.2. Channel Selection

  1. Use the Up/Down arrow keys on the digital keyboard to navigate through channels.
  2. Alternatively, use the Channel switch/exit key to switch between main and sub-channels or exit menu options.

6.3. Transmitting and Receiving (PTT)

  1. To transmit, press and hold the PTT (Push-To-Talk) transmit key on the side of the radio. Speak clearly into the microphone.
  2. Release the PTT key to stop transmitting and return to receive mode.

6.4. Adjusting Output Power

The UV98 Pro supports three power levels: High (10W), Mid (5W), and Low (1W). This can typically be adjusted via the menu system or a dedicated button, allowing you to conserve battery life when high power is not needed.

Green walkie-talkie displaying power settings: High (10W), Mid (5W), Low (1W).
Figure 6.1: Power Output Settings.

6.5. FM Radio Function

The radio includes an FM radio. Activate it through the menu or a dedicated function key (refer to the specific key mapping in Figure 4.1).

Image showing the walkie-talkie with text indicating dual frequency support (136-174MHz, 400-520MHz) and FM radio support.
Figure 6.2: Dual Frequency and FM Radio.

6.6. LED Flashlight

To activate the built-in LED flashlight, press the designated Flashlight button (refer to Figure 4.1). Press again to turn it off.

Image showing the walkie-talkie in a dark, wet environment with its LED flashlight illuminated, emphasizing its utility in the dark.
Figure 6.3: LED Flashlight in use.

6.7. SOS Alarm

In an emergency, press the Alarm key (refer to Figure 4.1) to activate the SOS alarm function. This will emit an audible alert to signal for help.

Image of a firefighter with the walkie-talkie, highlighting the SOS alarm prompt for operation safety assurance.
Figure 6.4: SOS Alarm Feature.

7. Maintenance

7.1. Cleaning

  • Wipe the radio's surface with a soft, damp cloth. Do not use harsh chemicals or abrasive cleaners.
  • Ensure the charging port and other connectors are free from dust and debris.

7.2. Battery Care

  • Avoid overcharging or completely discharging the battery.
  • Store the battery in a cool, dry place when not in use for extended periods.
  • If the battery performance degrades significantly, consider replacing it with an original BaoFeng battery.

7.3. Waterproof Seal

Although the device is IP68 rated, always ensure the battery cover and any port covers are securely closed before exposing the radio to water to maintain its waterproof integrity.

Image showing the walkie-talkie partially submerged in water, illustrating its IP68 professional waterproof protection level.
Figure 7.1: IP68 Waterproof Protection.

8. Troubleshooting

ProblemPossible CauseSolution
Radio does not power onLow or dead battery; improperly installed batteryCharge the battery; ensure battery is correctly installed.
Cannot transmit or receiveIncorrect frequency/channel; out of range; antenna looseVerify frequency/channel settings; move closer to other radios; check antenna connection.
Poor audio qualityLow battery; weak signal; volume too low/highCharge battery; move to an area with better signal; adjust volume.
Battery not chargingCharger/cable faulty; poor contactCheck charger/cable; ensure radio is properly seated in desktop charger or Type-C cable is fully inserted.

9. Specifications

FeatureSpecification
Model NumberUV98PRO
Output Power (W)10W-25W (Adjustable: 10W High, 5W Mid, 1W Low)
Battery Capacity (mAh)5800mAh
Waterproof / Water-ResistantIP68
Battery IncludedYes
MaterialPlastic
Storage Channel128
Frequency Range136-174MHZ (VHF) / 400-520MHZ (UHF)
Walkie Talkie TypePortable
DisplayYes
Maximum Range5km-10km (up to 20km in plains)
Product Size132 * 56 * 35mm (Body)
Product Weight220g
Antenna Length22cm (771 antenna)
Image illustrating signal coverage: 5-10 km in city, 10-15 km in suburbs, 15-20 km in plains, and penetration of 1-70 floors.
Figure 9.1: Signal Coverage and Penetration.

10. User Tips

  • Pairing Multiple Radios: To ensure communication between multiple UV98 Pro units, all radios must be set to the same frequency and channel. Advanced programming may be required for specific group communication features.
  • Maximizing Range: For optimal communication range, especially in open areas, ensure the 771 antenna is securely attached and fully extended. Avoid obstructions like large buildings or dense foliage.
  • Battery Life: Utilize the adjustable output power settings (High, Mid, Low) to conserve battery life when maximum range is not required. Lower power settings are sufficient for shorter distances.
  • Durability: While the radio is designed to be robust and waterproof (IP68), always handle it with care to prolong its lifespan.

11. Warranty and Support

Your BaoFeng UV98 Pro Walkie Talkie is covered by a manufacturer's warranty. Please refer to the warranty card included in your package for specific terms and conditions. For technical support, service, or warranty claims, please contact your retailer or the official BaoFeng customer service. Keep your purchase receipt as proof of purchase.

12. BAOFENG Manufacturing Process

Watch this video to see the manufacturing process of BAOFENG products, ensuring quality and reliability.

Video 12.1: BAOFENG factory production process.
Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.