EzoneTronics RM-RZ313-AHD

Contents

EzoneTronics RM-RZ313-AHD Car Rear View Backup Camera User Manual

Model: RM-RZ313-AHD

1. Introduction

Thank you for choosing the EzoneTronics RM-RZ313-AHD Car Rear View Backup Camera. This manual provides essential information for the proper installation, operation, and maintenance of your new camera. Please read this manual thoroughly before installation and use to ensure optimal performance and safety.

EzoneTronics AHD Car Rear View Backup Camera with icons for IP68 Waterproof, Super Night Vision, AHD Lens, and Easy Installation.

Figure 1: EzoneTronics AHD Car Rear View Backup Camera highlighting key features.

2. Features

  • AHD Video Signal: Designed to work with AHD car monitors and Android car stereos, supporting AHD/720P/25fps video output at DC 12V.
  • Easy Installation & Wide Compatibility: Can be easily mounted on your vehicle's license plate or bumper. Compatible with a wide range of Android Car Stereos.
  • Noise Reduction & Stable Transmission: Features an advanced HD digital image processor and a pure core RCA video cable (6 meters / 19.69 feet) for anti-shock performance, reduced noise, faster data transfer, and real image presentation.
  • 120 Degrees Fisheye Viewing Angle: Provides a wider rear parking vision area, minimizing blind spots.
  • IP68 Waterproof: Built with fully sealed glue filling craft, ensuring a standard IP68 waterproof level to resist water, fog, frost, and mist, allowing efficient operation in rainy conditions.
  • Excellent Night Vision: Enhanced visibility in low-light conditions for improved safety.
  • Guiding Lines: Integrated guiding lines assist with parking and reversing maneuvers.
Comparison of an ordinary camera's night vision versus the AHD camera's superior night vision.

Figure 2: Night Vision Comparison: Ordinary Camera vs. AHD Camera.

3. Specifications

No.ItemSpecification
1SensorCMOS
2Master ChipN721
3Video FPS1280(H) * 720(V) 25FPS
4TYPEAHD
5Lens Resolution100W 720P
6Electronic ShutterAUTO
7White BalanceAUTO
8Digital Image Noise Reduction2D DNR
9Voltage/CurrentDC 3.3V-5V / 90mA
10Signal to Noise Ratio>52 dB(AGC OFF)
11Output Impedance1.0 Vp-p / 75 Ω
12Power0.3W(U=3.3V)
13Operating Temperature(-30℃ ~ +85℃)
14Angle120°
15Guiding LineYes
16Lens MaterialPlastic + Glass
17Length of Video Cable6M
18Shell MaterialPlastic
19Wire or WirelessWire
20Alarm TypeACCESSORIES
21CertificationCE
22MaterialABS
23Package Dimensions7cm (L) x 12cm (W) x 6cm (H)
24Package Weight0.22 kg

Table 1: Technical Specifications for RM-RZ313-AHD.

Detailed specifications table for the RM-RZ313-AHD camera, listing sensor type, video resolution, power, operating temperature, and more.

Figure 3: Visual representation of the RM-RZ313-AHD specifications.

Image showing the compact dimensions of the camera, approximately 0.9 inches on each side.

Figure 4: Product dimensions of the camera.

4. Package Contents

The package includes the following items:

  • 1 x AHD Camera Unit
  • 1 x Video Cable (RCA, 6 meters)
  • 1 x Power Cable
  • 2 x Mounting Screws
  • 1 x Adhesive Pad
Image showing all components included in the package: AHD camera, RCA video cable, power cable, mounting screws, and adhesive pad.

Figure 5: Package contents of the EzoneTronics AHD camera.

5. Setup and Installation

Follow these steps for proper installation of your rearview camera:

  1. Choose Camera Position: Select a suitable location for the camera, typically near the license plate or on the bumper, ensuring a clear view of the rear.
  2. Power Connection:
    • Connect the red wire of the camera's power cable to the positive (+) terminal of your vehicle's reversing light.
    • Connect the black wire of the camera's power cable to the negative (-) terminal (ground) of your vehicle.
  3. Video Signal Connection:
    • Connect the yellow RCA connector from the camera's video cable to the AV display interface (video input) of your AHD monitor or Android car stereo.
    • The red trigger line (A) integrated with the video cable should be connected to the display's trigger line (usually labeled 'REVERSE' or 'BACKUP'). This signals the monitor to switch to the camera view when reverse gear is engaged.
  4. Secure Installation: Use the provided mounting screws or adhesive pad to securely attach the camera to your chosen location. Ensure all cables are routed safely and neatly, away from moving parts or heat sources.
Wiring diagram for reverse camera installation, showing connections to reversing light, monitor, and trigger lines.

Figure 6: Reverse Camera Installation Diagram.

Diagram showing the camera's compatibility with various car monitors and Android car stereos.

Figure 7: Camera Adaptation to various car monitors and Android car stereos.

6. Operating Instructions

Once installed, the camera will typically activate automatically when the vehicle is shifted into reverse gear, displaying the rear view on your connected monitor or car stereo.

Setting AHD Resolution on Android Car Stereo:

For optimal performance, ensure your Android car stereo is configured to receive an AHD signal. If the image is not displayed or appears distorted, you may need to adjust the resolution setting:

  1. Access your Android car radio's menu.
  2. Navigate to Factory Settings (this may require a password, consult your stereo's manual).
  3. Find the Parameter or System Settings option.
  4. Locate Reversing Image Resolution or a similar setting.
  5. Select AHD (720P/25fps) from the available options (e.g., CVBS/AHD/TVI).

Note: Some older or lower-quality devices may not support AHD mode, which could result in no image or poor image quality.

7. Maintenance

  • Cleaning: Regularly clean the camera lens with a soft, damp cloth to ensure a clear view. Avoid abrasive cleaners that could scratch the lens.
  • Inspection: Periodically check the camera's mounting and cable connections for any signs of looseness or damage.
  • Waterproof Seal: While the camera is IP68 waterproof, avoid directing high-pressure water jets directly at the camera during car washes, as this could potentially compromise the seal over time.

8. Troubleshooting

  • No Image on Display:
    • Check all power and video cable connections to ensure they are secure and correctly wired.
    • Verify that your monitor or car stereo is set to the correct video input (AHD). Refer to Section 6 for instructions on setting AHD resolution.
    • Ensure the trigger wire is correctly connected to activate the display when reversing.
    • Confirm that your display device supports AHD 720P/25fps input.
  • Poor Image Quality (Flickering, Distorted, or Unclear):
    • Check for loose or damaged video cable connections.
    • Ensure the camera lens is clean and free from dirt, water droplets, or condensation.
    • Verify that the display resolution on your car stereo is correctly set to AHD.
    • Check for any electromagnetic interference from other vehicle electronics.
  • Guiding Lines Not Appearing:
    • The camera is designed to output guiding lines. If they are not visible, check your monitor or stereo settings for options to enable/disable parking lines.

9. Warranty and Support

EzoneTronics products are manufactured to high-quality standards. For any technical assistance, warranty claims, or support inquiries, please contact your retailer or the EzoneTronics customer service department. Please retain your proof of purchase for warranty purposes.

© 2023 EzoneTronics. All rights reserved.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.