BEITIAN BT-T076

Contents

Beitian BT-T076 High Precision GNSS Helical Antenna

User Instruction Manual

1. Introduction

The Beitian BT-T076 is a state-of-the-art four-star full-frequency spiral antenna designed for high-precision Global Navigation Satellite System (GNSS) applications. This compact and lightweight helical antenna offers exceptional positioning accuracy, making it ideal for demanding tasks in various fields. Its robust design ensures reliable performance in diverse environments.

Key features include:

  • Four-star full frequency: Supports GPS L1/L2/L5, GLONASS L1/L2, GALILEO E1/E5a/E5b, BDS B1/B2/B3, QZSS L1/L2/L5/L6, IRNSS L5, SBAS L1/L5, and L-Band.
  • High Positioning Accuracy: Engineered for precise location data.
  • Omnidirectivity: Provides comprehensive signal reception.
  • Dust and Waterproof: Durable construction for outdoor use.
  • Compact and Lightweight: Easy to integrate into various systems.
Beitian BT-T076 RTK Four-Arm Propeller Drone Antenna
Figure 1: Beitian BT-T076 RTK Four-Arm Propeller Drone Antenna highlighting its features.

2. Product List

The standard package for the BT-T076 series antenna typically includes:

  • BT-T076 Series Antenna: 1 unit

Note: Detailed configurations may vary based on specific customer requirements or package options.

Product list showing one BT-T076 Series Antenna
Figure 2: Illustration of the product list.

3. Specifications

The following table details the technical specifications of the BT-T076 antenna:

Category Parameter Value
Antenna SpecificationsFrequency Range(MHz)GPS L1/L2/L5, GLONASS L1/L2, GALILEO E1/E5a/E5b, BDS B1/B2/B3, QZSS L1/L2/L5/L6, IRNSS L5, SBAS L1/L5, L-Band
Gain(dBi)3
Antenna AR (dB)≤3
Horizontal coverage angle360°
VSWR≤2
PolarizationRight-hand circular polarization
Port Impedance(Ω)50
Phase center error(mm)±2
Electrical SpecificationsLNA Gain(dB)32±2
Noise figure(dB)≤2
Operating voltage(V)3.3-5.0
Operating current(mA)≤35
Output VSWR≤2
Structural CharacteristicsConnector typeSMA-J
Antenna size(mm)Φ43.5*40.8
Antenna weight(g)≤35
Working EnvironmentOperating temperature(°C)-40 - +70
Storage temperature(°C)-55 - +85
Product features and specifications for BT-T076
Figure 3: Detailed product features and specifications.

3.1 Product Dimensions

Product dimension diagram for BT-T076
Figure 4: Product dimension diagram (refer to the '4. Product Dimension(mm)' section within the image for details).

The antenna has a diameter of Φ43.5 mm and a height of 40.8 mm. It features 3-M2.5 mounting holes with a depth of 6 mm. The connector type is SMA-J.

A spiral antenna base (e.g., model BT-M61AJ3 or BT-M61TJ3) may be available as an accessory or variant, offering different mounting and cable options. Its specifications are:

  • Type: Spiral Antenna Base
  • Weight: 90g
  • Size: Φ60×27mm
  • Line length: 3m
  • Connector: SMA-J
  • Mounting method: Magnetic suction
Spiral Antenna Base with SMA-J connector and magnetic suction mounting
Figure 5: Spiral Antenna Base, a related product or accessory.

4. Application Scenarios

The BT-T076 antenna is versatile and can be integrated into various systems requiring high-precision GNSS data. Common applications include:

  • Unmanned Aerial Vehicles (UAVs)/Drones: For precise navigation and mapping.
  • Handheld Terminal Equipment: Enhancing location accuracy for portable devices.
  • Small RTK Equipment: Providing real-time kinematic positioning capabilities.
  • Agricultural Machinery: For precision agriculture tasks.

The antenna's small size, high positioning accuracy, and light weight make it suitable for a wide range of applications where space and weight are critical factors.

Application scenarios for the BT-T076 antenna including drones, handheld devices, RTK equipment, and agricultural machinery
Figure 6: Visual representation of typical application scenarios.
Video 1: Demonstration of the Beitian BT-T076 antenna integrated with a drone.

5. Setup

Follow these steps to set up your BT-T076 GNSS helical antenna:

  1. Unpack: Carefully remove the BT-T076 antenna from its packaging. Inspect for any visible damage.
  2. Mounting: Securely mount the antenna to your desired platform (e.g., UAV, handheld device, RTK equipment). The antenna features 3-M2.5 mounting holes for attachment. Ensure the antenna is positioned with a clear, unobstructed view of the sky for optimal signal reception.
  3. Connection: Connect the SMA-J connector of the antenna to the corresponding SMA-J port on your GNSS receiver or device. Ensure the connection is firm but do not overtighten.
  4. Power Supply: Ensure your GNSS receiver or device provides the correct operating voltage (3.3-5.0V) to the antenna. Refer to your receiver's manual for power supply details.
  5. Initial Check: Once connected and powered, verify that your GNSS receiver recognizes the antenna and is receiving satellite signals.
Close-up of the Beitian BT-T076 helical antenna showing its SMA-J connector
Figure 7: Close-up of the BT-T076 antenna connector for proper setup.

6. Operating Instructions

The BT-T076 antenna is a passive component that receives GNSS signals. Its operation is primarily dependent on the connected GNSS receiver.

  1. Power On: Power on your GNSS receiver or device to activate the antenna.
  2. Signal Acquisition: Place the antenna in an open area with a clear view of the sky. The antenna will automatically begin acquiring satellite signals across its supported frequency bands.
  3. Data Processing: Your connected GNSS receiver will process the signals received by the BT-T076 antenna to provide positioning data. Refer to your receiver's manual for specific data output and configuration.
  4. Monitoring: Monitor the signal strength and positioning accuracy through your GNSS receiver's interface to ensure optimal performance.

7. Maintenance

To ensure the longevity and optimal performance of your BT-T076 antenna, follow these maintenance guidelines:

  • Cleaning: Regularly clean the antenna's exterior with a soft, damp cloth. Avoid using harsh chemicals or abrasive materials that could damage the housing.
  • Inspection: Periodically inspect the antenna and its connector for any signs of wear, corrosion, or damage. Ensure the mounting is secure.
  • Environmental Protection: While the antenna is dust and waterproof, prolonged exposure to extreme conditions (e.g., direct saltwater spray, extreme temperatures beyond operating limits) should be minimized if possible.
  • Storage: When not in use for extended periods, store the antenna in a cool, dry place, away from direct sunlight and extreme temperatures.

8. Troubleshooting

If you encounter issues with your BT-T076 antenna, consider the following:

  • No Signal/Poor Signal:
    • Ensure the antenna has a clear, unobstructed view of the sky.
    • Check the cable connection between the antenna and the receiver; ensure it is secure.
    • Verify that the GNSS receiver is powered on and configured correctly.
    • Test with a different cable or receiver if available to isolate the problem.
  • Incorrect Positioning Data:
    • Confirm the antenna is mounted stably and not experiencing excessive movement or vibration.
    • Check for potential sources of electromagnetic interference near the antenna.
    • Ensure your GNSS receiver's firmware is up to date.
  • Physical Damage:
    • If the antenna shows signs of physical damage, it may affect performance. Contact support for assistance.

9. User Tips

While no specific user reviews or Q&A were provided, general tips for GNSS antenna usage include:

  • Optimal Placement: Always aim for the highest possible mounting point with the clearest view of the horizon to maximize satellite visibility.
  • Cable Management: Use high-quality coaxial cables and ensure they are routed carefully to avoid kinks, sharp bends, or damage that could degrade signal quality.
  • Ground Plane: For some applications, a proper ground plane can enhance antenna performance. Consult your GNSS receiver's documentation for recommendations.
  • Interference Avoidance: Keep the antenna away from other electronic devices, power lines, or metal structures that could cause signal interference.

10. Warranty and Support

For warranty information, technical support, or service inquiries, please contact BEITIAN Official Store directly through the platform where you purchased the product. Ensure you have your purchase details and product model (BT-T076) ready when contacting support.

BEITIAN is committed to providing high-quality products and customer satisfaction.

© 2023 BEITIAN. All rights reserved.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.