Introduction
Thank you for choosing the SOAIY SH19s Gaming Bluetooth Speaker. This high-performance soundbar is designed to enhance your audio experience with its 3D surround sound, vibrant RGB lighting, and versatile connectivity options. Featuring a unique transparent design and steampunk mechanical buttons, the SH19s is perfect for gaming, music, and multimedia. This manual provides essential information on setting up, operating, and maintaining your speaker to ensure optimal performance.
Key Features
- Bluetooth 5.0: For faster transmission speed and stable connection.
- 3D Surround Sound: Enhanced audio experience with Dolby sound effect and 5.7mm dynamic speakers.
- RGB Lighting: 100% RGB high color gamut with colorful lights and transparent design for visual appeal.
- High Power Output: Normal mode 15W, Peak mode 30W.
- Multiple Playback Modes: Supports Bluetooth, AUX, USB, and TF card.
- Built-in Microphone: High-definition noise-reduction microphone for clear calls.
- Steampunk Mechanical Buttons: Unique and tactile control experience.
- Long Battery Life: Built-in 4000mAh lithium battery for extended playing time (up to 8 hours).
- Wide Compatibility: Adaptable to mobile phones, tablets, and laptops.
Setup Instructions
Package Contents
- SOAIY SH19s Gaming Bluetooth Speaker
- USB Charging Cable
- AUX Audio Cable
- User Manual (this document)
Charging the Speaker
- Connect the provided USB charging cable to the speaker's charging port (DC-5V socket).
- Connect the other end of the USB cable to a compatible USB power adapter (not included) or a computer's USB port.
- The charging indicator light will illuminate. Once fully charged, the light may change color or turn off, depending on the model.
- A full charge provides approximately 8 hours of playing time.
Powering On/Off
- To power on, press and hold the power button until the RGB lights illuminate and you hear a startup sound.
- To power off, press and hold the power button again until the lights turn off and you hear a shutdown sound.
Initial Placement
Place the speaker on a stable, flat surface. For optimal sound, ensure there are no obstructions directly in front of the speaker. The transparent design and RGB lighting are best appreciated in a visible location.
The SOAIY SH19s speaker positioned on a desktop, showcasing its colorful lights and transparent design.
Operating Instructions
Bluetooth Connection
- Power on the speaker. It will automatically enter Bluetooth pairing mode (indicated by a flashing light or voice prompt).
- On your device (phone, tablet, laptop), enable Bluetooth and search for available devices.
- Select "SH19s" from the list of devices.
- Once connected, the speaker will indicate a successful pairing (e.g., solid light, voice prompt).
- You can now play audio from your device through the speaker.
The SOAIY SH19s speaker demonstrating its Bluetooth 5.0 capability for faster and more stable connections.
AUX Mode
- Connect one end of the provided AUX audio cable to the speaker's AUX input port.
- Connect the other end to the audio output jack of your device (e.g., computer, MP3 player).
- The speaker should automatically switch to AUX mode. If not, press the Mode button (if available) to cycle through modes.
USB/TF Card Playback
- Insert a USB flash drive or a TF (MicroSD) card containing MP3, WMA, or WAV audio files into the respective port on the speaker.
- The speaker will automatically detect the storage device and begin playing audio files.
- Use the playback controls (Next/Previous, Play/Pause) on the speaker to manage your music.
Call Function (via Bluetooth)
When connected via Bluetooth to a smartphone:
- Incoming calls will be announced through the speaker.
- Press the Play/Pause button to answer an incoming call.
- Press the Play/Pause button again to end the call.
- The built-in high-definition noise-reduction microphone ensures clear communication.
The SOAIY SH19s speaker's HD call feature, showing a user relaxing while taking a call.
Controls (Steampunk Mechanical Buttons)
The speaker features tactile steampunk mechanical buttons for various functions:
- Power Button: Press and hold to power on/off.
- Play/Pause Button: Press to play or pause music; press to answer/end calls.
- Volume Up/Down Buttons: Press to adjust volume.
- Next/Previous Track Buttons: Press to skip tracks.
- Mode Button: Press to switch between Bluetooth, AUX, USB, and TF card modes.
A close-up view of the steampunk mechanical buttons on the SOAIY SH19s speaker.
Maintenance
Cleaning
- Wipe the speaker with a soft, dry cloth.
- Do not use abrasive cleaners, waxes, or solvents as they may damage the finish or transparent plexiglass.
- Avoid getting moisture into any openings.
Storage
- When not in use for extended periods, store the speaker in a cool, dry place away from direct sunlight and extreme temperatures.
- Ensure the speaker is fully charged before storing to preserve battery health.
Battery Care
- To prolong battery life, avoid fully discharging the speaker frequently.
- Charge the speaker regularly, even if not in active use.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Speaker does not power on | Low battery; Power button not pressed correctly | Charge the speaker fully; Press and hold the power button for 3-5 seconds. |
| Cannot connect via Bluetooth | Speaker not in pairing mode; Device Bluetooth off; Too far from speaker | Ensure speaker is on and in pairing mode; Turn on Bluetooth on your device; Move device closer to speaker (within 10 meters). |
| No sound | Volume too low; Incorrect mode selected; Audio source issue | Increase speaker and device volume; Press Mode button to select correct input; Check audio source device. |
| Sound distortion | Volume too high; Weak Bluetooth signal; Damaged audio file | Lower volume; Move device closer to speaker; Try a different audio file. |
| TF card/USB not playing | Unsupported file format; Card/drive not inserted correctly; Corrupted files | Ensure files are MP3, WMA, or WAV; Reinsert card/drive; Try different files or storage device. |
Specifications
| Feature | Detail |
|---|---|
| Brand Name | SOAIY (SwYiSm) |
| Model Number | SH-19 / SH19s Gaming Bluetooth Speaker |
| Speaker Type | Portable, Computer Speaker, Soundbar |
| Communication | Bluetooth (5.0), AUX, USB |
| Input/Output | AUX, USB |
| Sound Mode | Stereo Sound Mode, Extra Bass Mode |
| Output Power | 20W (Normal 15W, Peak 30W) |
| Frequency Range | 40Hz-20KHz / 100Hz-20KHz |
| Signal-to-noise ratio | ≥70db |
| Power Source | Battery (Built-in lithium battery) |
| Battery Capacity | 4000mAh (E-sports Battery Edition) |
| Playing Time | 8 hours |
| Bluetooth Version | 5.0 / 5.2 |
| Effective Distance | 10 meters |
| Number of Loudspeaker Enclosure | 1 (Dual speakers) |
| Channels | 2 (2.0) |
| Audio Crossover | Full-Range |
| Control | Volume control, Button operation |
| Playback Format | MP3, WMA, WAV |
| Expanded Storage | 32GB (Support Memory Card) |
| Material | Plastic, Metal |
| Cabinet Material | Plastic |
| Features | Play Video, Wireless subwoofer, Wireless rear speakers, Phone Function, TF card, Call function, RGB lighting, Transparent design |
| Dimensions (L*W*H) | 370*79*66mm |
| Waterproof | No |
| Voice Control | No |
| Support APP | No |
| Remote Control | No |
| Certification | CE |
The red version of the SOAIY SH19s speaker, illustrating its 360° surround sound, dual speakers, and connectivity options.
User Tips
- Optimal Sound Placement: For the best 3D surround sound experience, position the speaker centrally in front of your listening area.
- RGB Customization: Experiment with the RGB lighting modes to match your gaming setup or mood.
- Battery Preservation: If using the speaker primarily as a desktop unit, consider keeping it plugged in to preserve the internal battery's charge cycles.
- Firmware Updates: While no app is supported, occasionally check the manufacturer's website for any potential firmware updates that might enhance performance.
- Clean Connections: Ensure all cables (AUX, USB) are securely and cleanly connected to prevent audio interference.
Warranty and Support
SOAIY products are manufactured to high-quality standards. For specific warranty information and support, please refer to the documentation provided at the time of purchase or contact your retailer. Keep your proof of purchase for any warranty claims.
