1. Introduction
The RIDEN RD6012 is an assembled AC to DC voltage step-down bench power supply, featuring adjustable output voltage and current, a voltmeter, and USB connectivity. This manual provides essential information for safe and effective use of your device.
Key features of the RD6012 include a 2.4-inch color HD display, digital keypad control, and support for PC software control. With an optional WiFi board, it can also be controlled via a mobile application. The device supports firmware upgrades and incorporates multiple protection features such as Over Voltage Protection (OVP), Over Current Protection (OCP), and Over Temperature Protection (OTP) to safeguard your equipment.

2. Package Contents
The RD6012 assembled set comes ready for use. Please verify that all items listed below are included in your package:
- RD Power Supply (Main Unit)
- Input AC Power Cord (US/EU/UK/AU Plug, depending on your selection)
- X25A Output Cable
- Micro Communication Cable (found inside the X25A bag)
- External Temperature Sensor
- Backup Fuse
- Chinese and English Instruction Card (includes QR code for digital manual)


3. Setup and Initial Use
The RD6012 is provided as an assembled set, allowing for direct connection to AC power. The only difference between available choices (US/EU/UK/AU Plug) is the AC cable and the input AC voltage request; other components are identical.
3.1 Power Connection
Connect the appropriate AC power cord to the unit. Before connecting the RD6012 to any sensitive equipment, it is recommended to use a multimeter to verify that the output voltage of the power supply unit (PSU) is stable and matches the rated voltage. This helps to identify any potential damage during transit and prevents further loss.

3.2 Important Considerations
- Noise from 800W PSU: A high-frequency noise may occur when the switching power supply is unloaded due to the PWM control chip adjusting its working frequency. The cooling fan may also produce a loud sound when running, especially at higher ambient temperatures. These are normal phenomena. It is recommended to turn off the AC switch when the product is not in use.
- Surface Scratches: Minor scratches on the surface of the unit may be present due to the manufacturing process. These do not affect product performance.
- Warranty Label: A damaged warranty label due to express delivery does not affect the product warranty.
- Inductive Loads: When connecting inductive loads (e.g., motors), ensure that the maximum working voltage and current do not exceed 1/3 of the full range.
- Case Integrity: Do not remove the outer casing of the power supply unit for better heat dissipation. Doing so can alter the heat dissipation system, leading to overheating and damage to internal components, which will void the warranty.


4. Operation
4.1 Product Interface
The RD6012 features a user-friendly interface with a 2.4-inch color HD display, a digital keypad, and various control buttons and knobs for precise adjustments and settings.


4.2 Display Styles
The RD6012 offers two main display styles for viewing data:
- Traditional Style (Default): Shows numerical values for input voltage, set voltage/current, output voltage/current/power, and temperature.
- Curve Style: Displays a graphical representation of voltage and current over time, alongside numerical data.

4.3 Data Storage and Recall
The device allows you to store and recall frequently used setting parameters for convenience:
- Data Storage: Press the
MEMbutton followed by a number key (0-9) to store the current settings. - Data Call Out: Press the
SHIFTbutton followed by a number key (0-9) to recall previously stored settings.

4.4 Battery Charging Function
The RD6012 includes green charging terminals suitable for charging various battery types. However, please note the following:
- Safety Warning: Non-professionals should not use the battery charging function due to the risk of fire and explosion.
- Firmware Update: Upgrade to the latest firmware version for an improved battery charging experience.

4.5 PC Software Control
The power supply can be monitored and controlled using dedicated PC software, offering a friendly interface and powerful functions. This software is compatible with Windows 7 and above.

4.6 Mobile APP Control (Optional)
For mobile control, an optional WiFi board is required. The APP supports Android 8.0 and above, and iOS 10.0-13.4. Ensure your WiFi network is 2.4GHz and that client isolation/AP isolation and WMM functions are disabled for proper connection. Also, enable location and storage services for the APP during installation.

4.7 Firmware Upgrade
The RD6012 supports firmware upgrades via the PC software to ensure continuous optimization and new features. The firmware update process typically takes about 80 seconds.

5. Specifications
The following table details the technical specifications for the RIDEN RD6012 DC Power Supply:

| Feature | Specification (RD6012) |
|---|---|
| Model | RD6012 assembled set |
| Input Voltage Range | 100-120V/200-240V AC |
| Output Voltage Range | 0-60.00V |
| Output Current Range | 0-12.00A |
| Output Power Range | 0-720W |
| Input Voltage Measurement Resolution | 0.01V |
| Output Voltage Setting Measurement Resolution | 0.01V |
| Output Current Setting Measurement Resolution | 0.01A |
| Battery Voltage Measurement Resolution | 0.01V |
| Input Voltage Measurement Accuracy | ±(1%+5 digits) |
| Output Voltage Accuracy (setting vs. measurement) | ±(0.3%+3 digits) |
| Output Current Accuracy (setting vs. measurement) | ±(0.5%+5 digits) |
| Battery Voltage Measurement Accuracy | ±(0.5%+3 digits) |
| Automatic Cut-off Current (charging) | 100mA |
| Output Ripple Typical | 250mV VPP@6A |
| Working Temperature Range | -10℃~40℃ |
| External Sensor Temperature Detection Range | -10℃~100℃ / 0℉~200℉ |
| External Sensor Temperature Detection Accuracy | ±3℃ / ±6℉ |
| Constant Voltage Mode Response Time | 2ms (0.1A-5A Load) |
| Constant Voltage Mode Load Regulation | ±(0.1%+2 digits) |
| Constant Current Mode Load Regulation | ±(0.1%+3 digits) |
| Capacity Measurement Range | 0-9999.99Ah |
| Energy Measurement Range | 0-9999.99Wh |
| Capacity and Energy Statistical Error | ±2% |
| Buck Working Mode | Voltage drop >1V and >10% |
| Over Temperature Protection | System temperature >80℃ |
| Screen Brightness Setting | 0-5 (6 levels in total) |
| Screen Type | 2.4-inch color HD display |
| Product Dimensions | 173*92*336mm |
| Cooling Fan Start Condition | Output current >8A or System temperature >45℃ |
| Cooling Fan Shut Down Condition | Output current <7.9A and System temperature <45℃ |
| Operating Mode | Auto Range |
| DIY Supplies | Electrical |
| Certification | CE |
| Origin | Mainland China |
6. Maintenance
To ensure the longevity and optimal performance of your RIDEN RD6012, follow these maintenance guidelines:
- Cleaning: Regularly clean the exterior of the device with a soft, dry cloth. Avoid using abrasive cleaners or solvents that could damage the casing or display.
- Environment: Operate and store the device in a dry, dust-free environment.
- Ventilation: Ensure that the ventilation openings on the unit are not obstructed to allow for proper airflow and prevent overheating.
- Storage: When not in use for extended periods, store the power supply in its original packaging or a protective case.
7. Troubleshooting
7.1 Common Issues and Solutions
- High-Frequency Noise from PSU: If you hear a high-frequency noise when the switching power supply is unloaded, or a loud fan sound, these are generally normal operating characteristics. Consider adding a load resistor to the output to mitigate noise when unloaded. Turn off the AC switch when the product is not in use.
- APP/PC Software Incompatibilities: If the APP crashes or PC software does not function, ensure your operating system meets the requirements (Windows 7+ for PC, Android 8.0+ or iOS 10.0-13.4 for APP). It is recommended to test the software compatibility before purchase.
- WiFi Connection Problems (with optional WiFi board):
- Verify the WiFi board is correctly inserted.
- Ensure your WiFi network is operating on 2.4GHz.
- Disable client isolation/AP isolation and WMM functions on your router.
- Enable location and storage services for the APP on your mobile device.
- Output Abnormalities: If the power supply unit (PSU) shows abnormal output voltage or current, disconnect it immediately and contact support. Do not connect it to the RD6012 to prevent further damage.
- Fuse Blown: A backup fuse is provided. If a fuse blows due to incorrect operation, you can temporarily use the backup fuse by inserting it into the socket next to the blown one. Note that the backup fuse supports only 10A. For full output capability, it is best to remove the damaged fuse and solder a new one in the same position.
8. User Tips
- Always verify the output of your power supply with a multimeter before connecting it to sensitive electronic components or circuits.
- For optimal performance and to extend the lifespan of your device, ensure there is adequate ventilation around the power supply during operation.
- If you plan to use the battery charging function, familiarize yourself with battery safety protocols and ensure your device's firmware is up to date for the best experience.
- When not actively using the power supply, especially if you are sensitive to minor operational noises, consider turning off the AC switch to completely power down the unit.
9. Warranty and Support
RIDEN is committed to providing quality products and support. For any technical assistance, questions, or issues not covered in this manual, please contact our support team through the following channels:
- Email: 1749808860@qq.com
- WhatsApp: +8615868147353
- QQ Group: 550112838
- WeChat: 15868147353


