1. Introduction
Thank you for choosing the LEEDOAR JX10 TWS Wireless Headphones. These earphones are designed for an immersive audio experience, featuring touch controls, low latency for gaming, HiFi sound, and a digital display charging case. This manual will guide you through the setup, operation, and maintenance of your new headphones.
2. Package Contents
Please check the package for the following items:
- JX10 TWS Wireless Headphones (Left and Right Earbuds)
- Charging Case with Digital Display
- USB Charging Cable (Type-C)
- User Manual
3. Product Overview
The JX10 headphones feature a mechanical design with a creative scissor door charging case. The earbuds and case are equipped with LED lights, and the charging case includes a digital display for battery status.


4. Setup and Pairing
4.1 Initial Charge
Before first use, fully charge the headphones and the charging case. Connect the provided USB Type-C cable to the charging port on the case and a power source. The digital display on the case will show the charging progress.
4.2 Power On/Off
- Power On: Open the charging case lid. The earbuds will automatically power on.
- Power Off: Place the earbuds back into the charging case and close the lid. They will automatically power off and begin charging.
4.3 Bluetooth Pairing
- Ensure the earbuds are charged.
- Open the charging case lid. The earbuds will automatically enter pairing mode (indicated by flashing LED lights).
- On your device (smartphone, tablet, etc.), enable Bluetooth.
- Search for "JX10" in the list of available Bluetooth devices and select it to connect.
- Once connected, the earbud LEDs will stop flashing.
The JX10 features independent left and right earbuds, allowing for automatic connection to Bluetooth by simply opening the cover, without unnecessary operation.

5. Operating Instructions
The JX10 headphones feature smart touch controls for easy management of audio and calls.
5.1 Touch Controls

| Action | Function |
|---|---|
| Touch (either earbud) | Play/Pause music |
| Long press Left earbud (3-4 seconds) | Volume Down |
| Long press Right earbud (3-4 seconds) | Volume Up |
| Long press Left earbud (2 seconds) | Switch Mode (Game/Music) |
| Long press Right earbud (2 seconds) | Reject Call |
| Single touch Right earbud | Answer/Hang up call |
| Four touches (either earbud) | Summon Siri (Voice Assistant) |
| Three touches Left earbud | Previous Song |
| Three touches Right earbud | Next Song |
5.2 Audio Modes
The JX10 headphones support multiple audio modes optimized for different uses:
- Game Mode: Features ultra-low latency (0.045 seconds) for synchronized audio during gaming. Enhances footsteps and gunshots for a competitive edge.
- Music Mode: Provides Ultra HD audio decoding for a rich and dynamic listening experience.
- Call Mode: Ensures clear voice radio for calls.
- Noise Reduction Mode: Utilizes DSP voice noise reduction and ENC (Environmental Noise Cancellation) for clearer communication and immersive sound.
You can switch between Game mode and Music mode by double-clicking the left earbud.


6. Maintenance
To ensure the longevity and optimal performance of your JX10 headphones, follow these maintenance guidelines:
- Cleaning: Regularly clean the earbuds and charging case with a soft, dry, lint-free cloth. Do not use harsh chemicals or abrasive materials.
- Charging Contacts: Ensure the charging contacts on both the earbuds and the case are clean and free of debris to maintain proper charging.
- Storage: When not in use, store the earbuds in their charging case to protect them and keep them charged.
- Water Resistance: The headphones are waterproof (IPX4 rated, suitable for splashes and light rain), but not designed for submersion. Avoid exposing them to excessive moisture.
- Temperature: Avoid storing or using the headphones in extreme temperatures.
7. Troubleshooting
If you encounter any issues with your JX10 headphones, please refer to the following common solutions:
- Earbuds not pairing with device:
- Ensure both earbuds are in the charging case and fully charged.
- Open the case lid to activate pairing mode.
- Turn off and on Bluetooth on your device.
- Forget "JX10" from your device's Bluetooth list and try pairing again.
- Only one earbud working:
- Place both earbuds back into the charging case, close the lid, and then open it again.
- Ensure both earbuds have sufficient battery.
- Try resetting the earbuds (refer to the full user manual if a specific reset procedure is available).
- No sound:
- Check the volume level on both your device and the earbuds.
- Ensure the earbuds are properly connected to your device.
- Try playing audio from a different application or source.
- Charging case not charging:
- Ensure the USB Type-C cable is securely connected to both the case and the power source.
- Try a different charging cable or power adapter.
- Clean the charging port on the case for any debris.
8. Specifications
| Feature | Detail |
|---|---|
| Product Name | JX10 |
| Brand Name | LEEDOAR |
| Style | In-ear |
| Communication | Wireless (Bluetooth) |
| Wireless Type | Bluetooth v5.3 + EDR (dual-mode) |
| Bluetooth Chip | Bluetooth 5.3PEL League chip / RTS imported chip |
| Transmission Distance | Approx. 10 meters |
| Vocalism Principle | Dynamic |
| Number of Drivers | 2 |
| Magnet Type | Ferrite |
| Active Noise-Cancellation | Yes (ENC double wheat noise reduction, DSP voice noise reduction) |
| With Microphone | Yes |
| Control Button | Yes (Touch Control) |
| Volume Control | Yes |
| Waterproof | Yes |
| Support APP | No |
| Charging Method | Cable (Type-C) |
| Plug Type | NONE |
| Headset Battery Capacity | 40mAh / 0.148Wh |
| Charging Box Battery Capacity | 400mAh / 1.11Wh |
| Single Use Time | Approx. 5 hours |
| Total Playtime (with charging case) | Approx. 30 hours |
| Standby Time | Approx. 100 hours |
| Charging Times (from case) | 5-6 times |
| Low Latency (Game Mode) | 0.045 seconds |
| Case Dimensions | Approx. 59mm x 52.5mm |
| Material | Plastic |
| Certification | CE, FCC, UL |
| Origin | Mainland China |
9. User Tips
- For optimal gaming performance, ensure you are in Game Mode to benefit from the ultra-low latency.
- Experiment with the different audio modes (Game, Music, Call, Noise Reduction) to find the best setting for your current activity.
- Keep the charging case fully charged to ensure your earbuds are always ready for use, especially for extended gaming sessions or travel.
- If you experience any connectivity issues, try resetting your device's Bluetooth connection or re-pairing the earbuds.
10. Warranty and Support
For any warranty claims, technical support, or further inquiries, please contact your retailer or the manufacturer directly. Keep your proof of purchase for warranty services.