1. Product Overview
The RIDEN RD6018 is an assembled AC to DC adjustable step-down voltage power supply, designed for laboratory and benchtop applications. It offers a maximum output of 60V and 18A, with a total power output of up to 1080W (at 220V AC input). This unit comes pre-assembled for immediate use.

Figure 1: Front view of the RD6018 Assembled Set, showing the digital display and control interface.

Figure 2: The RD6018 in operation, displaying output voltage, current, and power.
2. Safety Information
- Ensure the power supply is connected to a reliably grounded AC outlet.
- Do not operate the device in wet conditions or expose it to moisture.
- Do not open the casing of the power supply unit (PSU) as it contains high voltage components and doing so may void the warranty.
- When connecting inductive loads (e.g., motors), ensure the maximum working voltage and current do not exceed 1/3 of the full range to prevent damage.
- Turn off the AC switch when the product is not in use.
3. Package Contents and Setup
The RD6018 Assembled Set is ready for use upon arrival. The package includes the main RD6018 unit and necessary accessories.

Figure 3: Complete accessories included with the RD6018 Assembled Set.
3.1. Accessory List
- RD Power Supply x1
- X25A Output Cable x1
- Input AC Power Cord x1 (AC cord in kind prevail)
- Micro Communication Cable x1 (inside X25A bag)
- External Temperature Sensor x1
- Backup Fuse x1
3.2. Initial Connection
- Connect the appropriate AC power cord to the unit and a grounded AC outlet. The unit supports 100-120V or 200-240V AC input depending on the plug type (US/EU/UK/AU).
- Connect the X25A output cables to the output terminals of the power supply.
- If using the external temperature sensor, plug it into the designated port.
- For PC communication, connect the Micro Communication Cable from the RD6018 to your computer.
Note:
- This set does not include a WiFi card for APP connection or a CR1220 battery for date/time display by default.
- If you plan to use the optional WiFi card, install the CR1220 battery first. Once the WiFi card is installed, it cannot be easily removed to install the battery.
4. Operating Instructions
4.1. Basic Operation

Figure 4: The RD6018 features silicone buttons for streamlined operation.
- Power On/Off: Press the green ON/OFF button to power the unit on or off.
- Setting Output Voltage/Current: Use the 'V-SET' and 'I-SET' buttons along with the numeric keypad and rotary encoder to set the desired output voltage and current.
- Display Styles: The 2.4-inch color HD display can show information in a traditional style (default) or a curve style for real-time data visualization.

Figure 5: Choose between Traditional (default) and Curve display styles.
4.2. Special Functions
- Data Storage/Call Out: The unit allows you to store and recall up to 9 sets of parameters (M1-M9). Use the 'MEM' button to store and 'SHIFT' + numeric key to call out.

Figure 6: Data storage and recall functionality for quick parameter setup.
- Battery Charging: The RD6018 can be used for battery charging. Connect the green charging terminals to the battery.

Figure 7: The RD6018 connected for battery charging.
Warning: Non-professionals should not use the battery charging function due to potential fire or explosion hazards. Upgrade to the latest firmware for optimal battery charging experience.
4.3. PC Software Control
The power supply can be monitored and controlled via PC software, offering comprehensive functions and a user-friendly interface. The software supports Windows 7 and above.

Figure 8: PC software control interface for the RD6018.
Download the PC software and instruction manual from the official Google Drive link: RD6018 Manual & Software
4.4. Mobile APP Control (Optional WiFi Board Required)
With an optional WiFi board, the RD6018 can be controlled via a mobile app (Android and iOS). The app allows for easy viewing and setting of parameters.

Figure 9: Mobile APP control interface for the RD6018 (WiFi board required).
Note:
- The WiFi communication only supports 2.4G signal; 5G signal is unsupported.
- Ensure client isolation/AP isolation and WMM functions are disabled on your router for proper WiFi connection.
- For Android, the app supports Android 8.0 and above. For iOS, it supports iOS 10.0-13.4 (iPhone 6-iPhone 11).
5. Specifications

Figure 10: Key specifications of the RD6018 Assembled Set.
| Parameter | Value |
|---|---|
| Model | RD6018 Assembled Set |
| Input Voltage Range | 100-120V/200-240V AC |
| Output Voltage Range | 0-60.00V |
| Output Current Range | 0-18.00A |
| Output Power Range | (AC220V) 0-1080W / (AC110V) 0-950W |
| Input Voltage Measurement Resolution | 0.01V |
| Output Voltage Setting Measurement Resolution | 0.01V |
| Output Current Setting Measurement Resolution | 0.01A |
| Battery Voltage Measurement Resolution | 0.01V |
| Input Voltage Measurement Accuracy | ±(1%+5 digits) |
| Output Voltage Accuracy (setting and measurement) | ±(0.3%+3 digits) |
| Output Current Accuracy (setting and measurement) | ±(0.5%+5 digits) |
| Battery Voltage Measurement Accuracy | ±(0.5%+3 digits) |
| Automatic Cut Off Current Value (charging) | 100mA |
| Output Ripple Typical | 250mV VPP@6A |
| Working Temperature Range | -10℃~40℃ |
| External Sensor Temperature Detection Range | -10℃~100℃/0℉~200℉ |
| External Sensor Temperature Detection Accuracy | ±3℃/±6℉ |
| Constant Voltage Mode Response Time | 2ms(0.1A-5A Load) |
| Constant Voltage Mode Load Regulation | ±(0.1%+2 digits) |
| Constant Current Mode Load Regulation | ±(0.1%+3 digits) |
| Capacity Measurement Range | 0-9999.99Ah |
| Energy Measurement Range | 0-9999.99Wh |
| Capacity and Energy Statistical Error | ±2% |
| Buck Working Mode | Voltage drop >1V and >10% |
| Over Temperature Protection | System temperature >80℃ |
| Screen Brightness Setting | 0-5 (6 levels in total) |
| Screen | 2.4-inch color HD display |
| Cooling Fan Start Condition | Output current >8A or System temperature >45℃ |
| Cooling Fan Shut Down Condition | Output current <7.9A and System temperature <45℃ |
| Product Dimension | 167*81*69mm |
| Weight (with package) | About 0.68kg |
6. Maintenance
- Cleaning: Use a soft, dry cloth to clean the exterior of the unit. Do not use abrasive cleaners or solvents.
- Fan Noise: High-frequency noise when unloaded or loud fan operation at high ambient temperatures are normal phenomena. This is due to the PWM control chip adjusting its frequency to reduce power consumption or the fan activating for cooling.
- Storage: When not in use, it is recommended to turn off the AC switch and store the unit in a dry, dust-free environment.
- Firmware Updates: Periodically check for firmware updates to ensure optimal performance and access to new features. Firmware updates can be performed via PC software.

Figure 11: Firmware upgrade process via PC software. Note: Updates may take approximately 80 seconds.
7. Troubleshooting
7.1. Common Issues and Solutions
- Q: The PSU I received has some scratches.
- A: Minor scratches on the surface are normal and do not affect product performance. These are often due to the manufacturing process or transit. If you are concerned about cosmetic imperfections, please consider this before purchase.
- Q: The warranty label is broken. Is my warranty still valid?
- A: Damage to the warranty label due to express delivery does not affect the product warranty.
- Q: Can I remove the case of the PSU for better heat dissipation?
- A: No, it is not recommended to remove the shell of the PSU. Doing so alters the heat dissipation system, which can lead to overheating and damage to components. Removing the case will also void the warranty.
- Q: I see some traces on the panel. Is this a defect?
- A: Slight traces at the button holes on the shell are a result of the injection molding process and are generally not noticeable during normal use. This is not considered a defect.
7.2. Software and Connectivity Issues (Optional WiFi Board)
- Q: The mobile app crashes on my phone.
- A: Software compatibility issues can occur. It is recommended to test the app functionality before purchasing the WiFi board. The app supports Android 8.0+ and iOS 10.0-13.4 (iPhone 6-11).
- Q: I cannot connect the RD6018W to my phone app via WiFi.
- A: Ensure the WiFi board is correctly installed. Verify that your WiFi network is 2.4GHz (5GHz is not supported). Disable client isolation/AP isolation and WMM functions on your router. Also, ensure location and storage services are enabled for the app on your phone.
- Q: I cannot connect the RD6018W to my PC via WiFi, but it connects to my phone.
- A: WiFi connection to PC is a test function and may have compatibility issues with some computers. If you experience problems, it is advised to use the USB micro cable for PC connection. Technical support for PC WiFi connectivity is limited.
8. User Tips
- Power Management: Always turn off the AC switch when the power supply is not in active use to prevent potential high-frequency noise from the switching power supply and unnecessary fan operation.
- Battery Installation for WiFi: If you plan to use the optional WiFi communication board, ensure you install the CR1220 battery for date/time display *before* installing the WiFi board. Once the WiFi board is in place, it is difficult to access the battery slot.
- Inductive Loads: When working with inductive loads like motors, limit the output voltage and current to no more than one-third of the power supply's full range to avoid overloading the unit.
- Software Compatibility: Before relying on the PC software or mobile app, download and test them on your devices to confirm compatibility. This can help avoid issues later, as software performance can vary.
- Firmware Updates: Regularly check the official Google Drive link for the latest firmware versions to benefit from performance improvements and new features.
9. Warranty and Support
For technical support, inquiries, or to report issues, please refer to the contact information provided by the seller or manufacturer. Warranty information is typically provided with your purchase documentation.

Figure 12: Contact information for support.
You can find additional resources and video instructions at the following links:
- Official Google Drive (Manuals & Software): https://drive.google.com/drive/folders/1_pv3ctOA_koShQ6Qiu1CZVCluHVD47TL?usp=share_link
- Instructional Videos:
- Battery Charging Function Introduction: https://youtu.be/irTbqfqtgU0
- Output Voltage and Current Setting: https://youtu.be/S6Kan66dNsk
- Data Group Quick Storage and Call out: https://youtu.be/eo5saPjOGpo
- Keypad Lock and Unlock: https://youtu.be/zxpmasJyQ6Y
- System Setting: https://youtu.be/Q9d3rIgIrOc
- Main Page Style Setting: https://youtu.be/f51VDiY2VHE
- Storage Data Setting: https://youtu.be/i1kTeurS13I
- System Information: https://youtu.be/Um4NQObeeJE
- iOS APP Download, Installation and Connection: https://youtu.be/nH2HYwop0TE
- iOS APP Operation: https://youtu.be/lXSw1CM9IY8
- Android APP Download, Installation and Connection: https://youtu.be/QwyBEUCnp9c
- Android APP Operation: https://youtu.be/hqrF4keTfbE
- PC Software Download and Basic Operation: https://youtu.be/mjt1RMaah1Y
- Firmware Upgrade: https://youtu.be/NOoLfDw0DiY
- Calibration: https://youtu.be/c9sn1wY2mjE
- Logo Update: https://youtu.be/vuVhBsohWts
- RD6006 WiFi Connection Problem and Solution: https://www.youtube.com/watch?v=7sTtc1kweJM
Video 1: Product overview and demonstration of key features.