Important Safety Information
Note: Please read carefully before use.
1. Only the TI120 is a thermal imager.
2. The IR02C is an infrared thermometer and is not a thermal imager.
3. If you intend to purchase a thermal imager, please ensure you select the TI120 model and not the IR02C infrared thermometer.

Image: Comparison of Mestek TI120 thermal imager and IR02C infrared thermometer, highlighting that only TI120 is a thermal imager.
1. Product Overview
The Mestek TI120 is a handheld infrared thermal imager designed for various applications including equipment maintenance, power detection, floor heating detection, pipeline maintenance, electronic component testing, and automobile fault detection. It features a dual camera mode for both infrared and visible light imaging, a 3.5-inch color screen, and robust battery life.
Key Features:
- Dual camera (Infrared/Visible Light)
- Large storage: 2000 image capacity
- Strong battery life: Built-in rechargeable lithium battery (5000mAh/3.7V)
- USB Type-C connectivity
- Hot and cold automatic tracking
- High and low temperature alarm
- Adjustable emissivity
- 3.5-inch color screen
- External MicroSD card support

Image: Key features of Mestek TI120 thermal imager.
2. Package Contents
Upon opening the package, please verify that all items listed below are present and in good condition:
- Thermal imaging host (Mestek TI120)
- Cloth bag
- Color box (packaging)
- Charging/data cable (USB Type-C)
- Leather strap
- Certificate
- Lens cleaning cloth
- User Manual (multi-country)

Image: Packaging display and item list.
Unboxing Video:
Video: Unboxing and initial overview of the Mestek TI120 thermal imager, showing included accessories and basic power-on sequence.
3. Device Appearance and Controls
Familiarize yourself with the physical components and controls of your Mestek TI120 thermal imager:

Image: Appearance introduction with numbered parts and their functions.
- 3.5 inch screen: Main display for thermal and visible light images, and menu.
- On/Off key: Long press to power on/off.
- LED light switch: Short press to open, short press to switch 1st gear/2nd gear/off.
- Image storage record: Short press to enter the picture storage record. Short press the SET key to delete the single picture.
- Return key: Short press to return to the previous menu.
- Setting buttons: Short press to enter the settings menu or enter the data settings.
- Up/down/left/right keys: Can be used to switch options and view image storage history.
- LED lighting: Integrated LED light.
- Infrared camera: Captures thermal images.
- Visible light camera: Captures visible light images.
- Camera cover: Protects the camera lenses.
- Tripod screw holes: For mounting on a tripod.
- Shooting key: Short press to shoot and save the current scene.
4. Setup and Charging
4.1. Initial Charging
The Mestek TI120 is powered by a built-in 3.7V 26650 lithium battery with a 5000mAh large capacity, providing up to 10 hours of continuous use. Before first use, or when the battery indicator is low, charge the device using the provided USB Type-C cable.
- Connect the USB Type-C cable to the device's charging port.
- Connect the other end of the cable to a suitable USB power adapter (not included) or a computer's USB port.
- The battery indicator on the screen will show charging status.

Image: Device charging via USB cable.
4.2. Power On/Off
- To power on: Long press the On/Off key (2) until the Mestek logo appears on the screen.
- To power off: Long press the On/Off key (2) until the device shuts down.
5. Operating Instructions
5.1. Menu Navigation
The device features an intuitive menu system for adjusting various settings. Use the setting buttons (6) to enter the menu and the up/down/left/right keys (7) to navigate.

Image: Menu Operation Instructions.
5.2. Display Modes (Infrared and Visible Light)
The TI120 supports switching between infrared thermal imaging and visible light imaging, as well as fusion modes. This allows for comparison and accurate identification of fault points.

Image: Infrared and Visible Light Dual Camera Display.
You can adjust the imaging options and fusion levels to suit different needs, enhancing the rendering effect.

Image: Infrared and visible light display adjustable with fusion modes.
5.3. Palette Options
The device offers six color imaging palettes to choose from, allowing you to visualize temperature differences effectively and measure details of the target object.
- Red Hot
- High Contrast Rainbow
- Rainbow
- Lava
- Iron Oxide Red
- White Hot

Image: Six Color Imaging Palettes.
5.4. Hot and Cold Automatic Tracking & Alarm
The TI120 features automatic tracking of hot and cold spots. You can set maximum and minimum temperature values. If the detected temperature exceeds the set value, an alarm icon will be displayed on the screen.
- Central temperature point: Displays the temperature at the center of the screen.
- Highest temperature point: Indicates the maximum temperature detected.
- Lowest temperature point: Indicates the minimum temperature detected.

Image: Hot and cold automatic tracking with high and low temperature alarm.
5.5. Emissivity Adjustment
Adjustable native emissivity allows for higher accuracy measurements based on the surface material of different objects. Refer to the table below for common object emissivities:

Image: Emissivity adjustable with a table of common object emissivities.
5.6. Image Storage and Export
The device has a mass storage capacity for up to 2000 photos. Use the one-key storage function to quickly record the current image.

Image: Mass storage for 2000 photos.
Stored images can be transferred to a computer using the provided USB data cable. The image transfer speed is up to 12Mbps/sec.

Image: USB connection to computer for data export.
5.7. LED Lighting
The TI120 includes bright LED lighting with two levels of brightness, allowing you to adjust according to the ambient light conditions.

Image: Bright LED lighting.
6. Maintenance
6.1. Cleaning
- Use the provided lens cleaning cloth to gently clean the camera lenses and screen.
- Do not use abrasive cleaners or solvents that could damage the device.
- Keep the device free from dust and debris.
6.2. Battery Care
- Charge the device regularly to maintain battery health.
- Avoid fully discharging the battery for extended periods.
- Store the device in a cool, dry place when not in use.
7. Troubleshooting
If you encounter issues with your Mestek TI120, please refer to the following common troubleshooting steps:
- Device not powering on: Ensure the battery is charged. Connect to a power source and try again.
- Screen is blank or frozen: Try restarting the device by long-pressing the On/Off key. If unresponsive, allow the battery to fully discharge and then recharge.
- Inaccurate temperature readings: Check the emissivity setting for the material being measured. Ensure the device is within its operating temperature range.
- Cannot save images: Verify that the external MicroSD card is properly inserted and has sufficient free space.
- Cannot connect to computer: Ensure the USB cable is securely connected to both the device and the computer. Try a different USB port or cable.
If the problem persists, please contact customer support for further assistance.
8. Specifications
The following table outlines the technical specifications for the Mestek TI120 Infrared Thermal Imager:

Image: Product Parameters Table.
| Attribute | Value |
|---|---|
| Product Name | Handheld Infrared Thermal Imager |
| Thermal Imaging Pixels | 10800 (120*90) |
| Spectral Response Band | 8~14um |
| Field of View | 50° * 63.4° |
| Cell Size | 17um |
| Output Frame Rate | ≤ 20Hz |
| Thermal Sensitivity | ≤ 60mK |
| Measure the Working Environment Temperature | 0~35°C |
| Temperature Measurement Range | -20~400°C |
| Temperature Measurement Range and Accuracy | 1) -20°C~0°C: ± 5°C 2) 0°C~100°C: ± 3°C 3) 100°C~120°C: ± 5°C |
| The Best Detection Distance Range | 0.5m~1.2m |
| Palette | Six Color Imaging Palettes |
| High and Low Temperature Alarm | YES |
| SENSOR Non-Uniformity | <5% |
| Screen Size | 3.5 inch |
| Display Resolution | 320*240 |
| Visible Light Resolution | 30W (640*480) |
| Storage | External 8G MicroSD Card |
| Storage Memory | SDRAM: 256Mbit + SPI |
| Communication Interface | NORFLASH: 64Mbit |
| Powered By | Lithium battery (26650 lithium battery; 5000mAh/3.7V) |
| LED Lighting | High power white LED |
| Waterproof Level | IP65 |
| Operating Temperature | -10 ~ 50°C |
| Storage Temperature | -40 ~ 70°C |
| Anti-drop | 1.5m |
| Size | 238*95*85.5mm |
| Weight | 540g |
9. User Tips
- The 3.5-inch screen provides clear data display, making it easy to read temperature values and imaging modes.
- The external 8G MicroSD card offers ample storage for up to 2000 thermal images, ensuring you can document your findings effectively.
- Remember to adjust the emissivity setting based on the material you are scanning for the most accurate temperature readings.
10. Warranty and Support
For warranty information, technical support, or service inquiries, please refer to the contact details provided with your purchase documentation or visit the official Mestek website. Keep your proof of purchase for warranty claims.